HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > DRAGBIKE ZONE.com > Thread: putting a new basket on ring gear ? NEW TOPIC NEW POLL POST REPLY
dunedog


Parking Attendant
Posts: 2
posted September 26, 2008 08:02 PM        
putting a new basket on ring gear ?

I have a 01 zx12. The clutch basket fell apart. I found one from someone on this web site.With the dealer only selling the gear and the basket already connected together,I wonder if any one has connected them together and if so how. Do you use the old rivets ? Do you need to heat treat them if they can be used.Also my center clutch hub has some grooves in it.would it be possible to file them out a little.I know I should just save up and buy a billet basket and all new parts but i haven't been able to ride for about a month now .
____________
TJ

  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7235
posted September 27, 2008 04:33 AM        
we put muzzys billet basket kit on dads ring gear.(cheapest option to get a billet basket) that uses bigger rivets that you weld on the back. i believe that the stock rivets are pressed in(i had to drill them out)
you can use a small flat file to take grooves from the hub. i did it to mine
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos

  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > DRAGBIKE ZONE.com > Thread: putting a new basket on ring gear ? NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.21968388557434 seconds processing time