VincentHill
Needs a life
Posts: 6520
|
posted July 27, 2007 02:04 PM
Schnitz Progressive Controller (New One)
I am looking real hard at this one! It is even hooked to the O2 Sensor to read A/F! This may have saved my engine if I had it last year!
____________
Made History @ Daytona and still one fast old man!!
  
|
osti33
Needs a job
Posts: 2973
|
posted July 27, 2007 03:39 PM
I saw it at the dealer show in Indy in Feb. I was wondering when it was going to hit the market. It looks like a real nice piece.
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted July 28, 2007 06:28 AM
Very interesting, I might have to replace my cheap 2 dial.
____________
TFA 200MPH CLUB MEMBER!
|
VincentHill
Needs a life
Posts: 6520
|
posted July 29, 2007 02:18 PM
quote:
Very interesting, I might have to replace my cheap 2 dial.
This would have saved me $2,000 and the time I have spent to rebuild my engine when I ate a few Pistons! YES I am getting rid of my 2 dial also plus there is not 20 Second total time it will work before reset!
|
ryan schnitz
Novice Class
Posts: 63
|
posted July 31, 2007 05:53 AM
 Edited By: ryan schnitz on 31 Jul 2007 06:53
This is really a great unit. So adjustable and programmable without a laptop.
|
VincentHill
Needs a life
Posts: 6520
|
posted July 31, 2007 08:06 AM
quote:
This is really a great unit. So adjustable and programmable without a laptop.
AND would have saved me MORE that it cost in engine parts If I had it last year with the access to the Wide Band O2 sensor that it neatly adjustable to cover short lean spikes for the amount of time YOU want to allow! I may be poor, but I cannot afford NOT to have one of those!
How long has it been available?
____________
Made History @ Daytona and still one fast old man!!
|
ryan schnitz
Novice Class
Posts: 63
|
posted July 31, 2007 08:12 AM
Edited By: ryan schnitz on 31 Jul 2007 09:14
About a week. We've had several test units in several applications for some time... Including Rickey Gadson's Super Street Kawasaki ZX-14 tuned by Coby Adams of Adams Performance.
|
VincentHill
Needs a life
Posts: 6520
|
posted July 31, 2007 12:17 PM
A VERY NEAT Piece of equipment and I have even sent Pierre (Bear Racing in SA) the write up. My only regret is I did not have this a few years sooner! BUT Better later than never at all.
____________
Made History @ Daytona and still one fast old man!!
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted July 31, 2007 02:16 PM
I don't know if you use the Muzzy Digi-Kill Mr. Hill, But it might send a false positive
reading to the new controller. I know a lot of 12 owners run that type of unit.
Do you know if that has been tested Mr. Schnitz?
Thank you much
____________
TFA 200MPH CLUB MEMBER!
|
ryan schnitz
Novice Class
Posts: 63
|
posted August 01, 2007 04:11 AM
The PNC-3000 will work fine with the Digi-kill units. We have a user calibration for lean spikes when shifting. The controller would have to see a user defined lean condition for .200 - 1.000 seconds (this is also user defined)
|
VincentHill
Needs a life
Posts: 6520
|
posted August 01, 2007 05:30 AM
quote:
I don't know if you use the Muzzy Digi-Kill Mr. Hill, But it might send a false positive
reading to the new controller. I know a lot of 12 owners run that type of unit.
Do you know if that has been tested Mr. Schnitz?
Thank you much
No I do not! I have tried several units of different devices and THEY were more trouble with cutting the engine off at the wrong time!
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted August 01, 2007 06:53 AM
Very neat feature.
____________
TFA 200MPH CLUB MEMBER!
|
VincentHill
Needs a life
Posts: 6520
|
posted August 01, 2007 08:03 AM
Yes, Now More money for me to spend that I never had to begin with!
____________
Made History @ Daytona and still one fast old man!!
|
|
|
HOME
NEW TOPIC