ultra nem
Parking Attendant
Posts: 21
|
posted March 30, 2007 10:08 AM
heavy hitters, what kinda times all motor stock wheelbase
Curious on what I should set my goals at.
I was able to get a 9.80 last season weighing in at about 235 suited with these mods
Slammed/strapped
Full muzzy
No flies
-1 up front
Now I have added a
Pc3
Air shifter
In your guys opinion or experience where should I be at?
Hoping to make it this weekend to see what I can manage first time out this year.
Thanks for any help or advise.
  
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 30, 2007 10:32 AM
ZX14 right?
I would say 9.60-70 should be very good. problem is your fighting the wheelies... you will get a hell of a lot more out of an arm... 6" over then you can still ride on the street well...
____________
200-MPH CLUB MEMBER!
|
ultra nem
Parking Attendant
Posts: 21
|
posted March 30, 2007 10:45 AM
Thanks
I was hoping for some 60's myself.
I really don't wanna stretch it.
I have a busa just about finished up for shootout and this is my first bike I had at stock wheelbase in a very long time.
Forgot how fun they can be!
If I do extend, I was only thinking of putting a 60" cheater arm.
Yes its a 14 and you're right about fighting them wheelies.
LOL
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 30, 2007 02:14 PM
Cool!!! I know about wheelies for sure!!! I race my wife's Stock wheelbase 98 R1... tell me about wheelies for sure!!!
____________
200-MPH CLUB MEMBER!
|
Nelson Taylor
Zone Head
Posts: 927
|
posted March 30, 2007 05:15 PM
 Edited By: Nelson Taylor on 30 Mar 2007 18:16
Nem I'm gonna put you in the 50's all day long. With practive, you'll get used to launching it at Stk wb, and you also have the luxury to try a variety of fuels which can get you there.
I'm 35lbs lighter than you suited with a best of 9.63 airshifting with stk pipes,no flies, and stk wb. Now I know 35lbs is quite a bit of difference but I believe it can be done with your mods.
Start with an 87 octane pump gas then go to VP fuels U4 and then MR9. (Give a report)
4,500-5,000rpm is my preference off the line. What rpm do you leave at?
Good Luck.
BTW, the wheelies is what the spectators like. Remember we're entertainment for some.
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
smokinzx14
Needs a life
Posts: 10197
|
posted April 01, 2007 05:10 PM
I have a friend that's 200 pounds , stock wheel base , piped and p/c, foot shifting and has run 9.31 @ 151 .. so i would say 9.50s maybe better ...Smokin..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
ultra nem
Parking Attendant
Posts: 21
|
posted April 01, 2007 05:28 PM
Coo!
Sounds great, thanks for the info.
Hoping to get to the track this this weekend coming up. The last couple days were shity here in chi.
Ill keep you all updated.
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted April 02, 2007 12:54 PM
9.40's that's what I'm running suited at 235lbls
|
serius blk
Zone Head
Posts: 543
|
posted April 04, 2007 07:36 AM
i know you said stock but ninjaboy has his 14 extended. Hes in the 8 sec area. His bike is 11 or 14 over. But with the weight hes getting it to work.
|
ultra nem
Parking Attendant
Posts: 21
|
posted April 04, 2007 07:41 AM
quote:
9.40's that's what I'm running suited at 235lbls
Damn!
You're gettin it done!
That will be sweet if I can manage that early this year.
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted April 04, 2007 04:36 PM
Not really that hard Nem, these bikes run. My best on my Busa set up the same way was 9.68 vs 9.42 for the 14.
|
|
|
HOME
NEW TOPIC