MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted November 03, 2005 08:52 PM
Coming soon!!! Billet Oil pan with swing pickup!!!-ZX12R
Ok guys just wanted to let everyone know that there is a Billet Oil Pan totally in the works and it is about 1/2 way complete, I am figuring in the next 2-3 weeks the first complete pan will be done....
As soon as everything is finished I will post an add with all of the pricing and etc.... this pan will not only work for dragracing it will also work great for the dwarf car guys.....
just a little teaser.... it is about 1/3rd larger then the busa pan, and it is not going to be cheaper..... but how low do you want to go...
____________
200-MPH CLUB MEMBER!
   
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted November 03, 2005 09:13 PM
Just in time , I am about to take mine off and send it to Coby Adams................
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
catman12
Expert Class
Posts: 169
|
posted November 03, 2005 10:03 PM
Mike, how much "cut" is that compared of a stock oilpan?
____________
6.23@126.7mph 1/8mi , 9.44@150.99mph 1/4mi 60" Arm, 1361cc, manual shifting.
http://www.kiruna.se/~mgrape
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted November 03, 2005 10:11 PM
should be a lot... I will post pix's as soon as I can...
____________
200-MPH CLUB MEMBER!
|
rac4it
Needs a job
Bergie
Posts: 3009
|
posted November 04, 2005 05:51 AM
Will it require a sidewinder?
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted November 04, 2005 08:15 AM
that is not 100% yet, but we are trying to finish the design so you can use a stock pipe, but then you will not be able to lower it any more then your pipe allows....
|
canadamaxxer
Pro
Posts: 1090
|
posted November 05, 2005 06:33 AM
quote:
that is not 100% yet, but we are trying to finish the design so you can use a stock pipe, but then you will not be able to lower it any more then your pipe allows....
That is true, but if there is any doubt in a guy's mind about the OEM pickup being an issue (especially with our recent conversations about the stock oil pumps in the 12R being inadequate vs the pickup sucking air), this would put it to bed. If this will work with stock fairings and aftermarket (not Sidewinder) pipes, I am in like sin....
Are you intending to do an exchange program for the OEM pan?
|
kawachan
Pro
Posts: 1031
|
posted November 05, 2005 02:51 PM
Yo...me TOO. "Stock" type system pan!!
____________
RED NINJAS RULE!!
|
megabyte
Pro
Posts: 1047
|
posted November 05, 2005 04:38 PM
Yep, but only if it works with my akro and stock fairing.
____________
We First make our habits and then our habits make us.
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted November 05, 2005 09:28 PM
no exchange on pans. they are not needed.
and I will express the interest for the Stock style header fitting.....
I have a spare header that I am going to drop off to have checked...
is there much difference with a muzzy header vrs an akro header?
|
Lorcan
Expert Class
Posts: 327
|
posted November 07, 2005 10:19 AM
BigCC Racing do these. Mike Burman has one on his 232mph ZX12R.
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted November 07, 2005 10:54 AM
I did a search on their web page and did not find anything? do you have a link.
thanks!
Oh I dropped the muzzy header off at the shop today, so they can try and make a stock style header work.
MM
____________
200-MPH CLUB MEMBER!
|
Lorcan
Expert Class
Posts: 327
|
posted November 07, 2005 01:11 PM
They aren't on the site, but here's a pic....
|
kawachan
Pro
Posts: 1031
|
posted November 07, 2005 02:54 PM
Hey hey hey. What is that big ole spool looking thing up front ? :-)
Nice looking pan, BTW.
____________
RED NINJAS RULE!!
|
Lorcan
Expert Class
Posts: 327
|
posted November 07, 2005 03:18 PM
GT35R 
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted November 07, 2005 04:09 PM
Doesnt look like it holds much, is it a dry sump?
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted November 07, 2005 06:36 PM
that does look like a dry sump to me? or is it a standard pan? Lorcan?
____________
200-MPH CLUB MEMBER!
|
Lorcan
Expert Class
Posts: 327
|
posted November 07, 2005 11:43 PM
It's not a dry sump, it has a swinging pickup.
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted November 08, 2005 05:31 AM
How much does it hold, doesnt look like much
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted November 08, 2005 08:05 AM
That is awsome!! finally someone who actually engineer's something and not copies the original and sells it for nothing.
Mad Mike
____________
200-MPH CLUB MEMBER!
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted November 08, 2005 08:06 AM
oh how much by the way?
____________
200-MPH CLUB MEMBER!
|
trenace
Needs a job
Posts: 3056
|
posted November 08, 2005 01:05 PM
 Edited By: trenace on 8 Nov 2005 13:05
Lorcan, does the BigCC racing pan take the stock header?
If not, MadMike, I definitely would be interested in your pan if it or an option of it can take stock header. (Or maybe even if the BigCC one does.)
|
Lorcan
Expert Class
Posts: 327
|
posted November 09, 2005 04:58 AM
I don't know how much oil they hold - I'll find out from Mikey. He has been running his all year with no problems, he runs 8.4s at the track and has run a couple of flyers at over 230mph. I dunno about the stock headers, both the bikes I have seen them on have been turbos. I'm not connected to BigCC so I don't have a price - you would have to speak to Sean and he is at the NEC show at the moment. The Busa version is £395UKP though, that's about $700USD.
|
spencercyclecom
Zone Head
Posts: 535
|
posted November 16, 2005 08:08 AM
....there is a kickazz billet pan on the way....soon very soon...
____________
Thanks
Doug Ray
SpencerCycle.com
SpencerCycle Center Inc.
Spencer Performance Group Inc.
Toll Free 1-800-510-1945 ext #10
International 1-800-510-1945 ext #11
Local/Tech 1-704-642-0987 ext #12
Fax 1-704-642-0987
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted November 16, 2005 11:53 AM
Doug call me I left a message last week?
thanks....
|
|
|
HOME
NEW TOPIC