VincentHill
Needs a life
Posts: 6520
|
posted September 10, 2005 12:30 PM
Karl, Sounds like I need to have an Aluminum Spacer of about .020 and that would take care of the 2 gaskets. I am sending you my e-mail address. send me a few Pics because the Price is right and I could not see any reason for a "2" Stage either. I do not understand about the "Modded" Cover. so e-mail me.
____________
Made History @ Daytona and still one fast old man!!
  
|
trenace
Needs a job
Posts: 3056
|
posted September 10, 2005 01:11 PM
quote:
Tenance, The Max I could deal with was 3 Schnits and 3 Muzzy (For any length of time) Wait until you see then and YOU will understand why they could be used for suspension!!
Thanks Mr Hill. I will then try three Brock's and three Schnitz's before trying six Schnitz's.
|
Nukedog
Expert Class
Posts: 449
|
posted September 10, 2005 02:29 PM
 Edited By: Nukedog on 10 Sep 2005 15:30
quote:
Vince I know from my past Drag Racing days on the Z1s that if you tryed to pull the clutch while the motor was at full song you can break some sheeeeot. But keep in mind that all you need to do is chop the throttle and the pressure created by the little weights is gone. Looking at the 12 clutch arm I would say that you would probably snap it off at the pressure plate if you pulled the clutch in at full song. Again just chop drop and roll!!!!!!!! I do crack myself up 
That has to do with MPH (actual output shaft) and not RPM (engine) though with a lock up...right? At least with a single stage lock up you can pull the lever in with ease at 6K...
____________
02 Busa...Turbo...
09 YZF-R6S...
|
gunner
Needs a life
Posts: 5778
|
posted September 10, 2005 05:49 PM
The lock up divice is attached to the input shaft SIR. RPM related.
____________
There's no such thing as a motor with no more power to give only people with no more intelligence to get it
|
Nukedog
Expert Class
Posts: 449
|
posted September 10, 2005 06:47 PM
I rode a Busa last week that you could pull the lock up in at 6000 rpm with no problem. Bike was running 9.30's...???
____________
02 Busa...Turbo...
09 YZF-R6S...
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 11, 2005 12:02 AM
6k isnt all that much RPM....especially if you want to be able to slide the clutch out of the hole.
I certainly wouldnt want mine to lockup completely at that rpm.
____________
Do not taunt happy fun ball!
|
entropy
Moderator
Posts: 8671
|
posted September 11, 2005 12:26 AM
VH,
The "hat" is on Buddy's turbo in Dallas but he (and Harry) are at my house in Houston.
He'll get it early next week when he goes back home. I'll send you the hat, cover spacer, modded clutch cover later next week.
The "mod" on the clutch cover is simply a carrier bearing for the outboard end of the puller shaft.
____________
This moderator uses moderation in moderation
|
VincentHill
Needs a life
Posts: 6520
|
posted September 11, 2005 05:14 AM
quote:
VH,
The "hat" is on Buddy's turbo in Dallas but he (and Harry) are at my house in Houston.
He'll get it early next week when he goes back home. I'll send you the hat, cover spacer, modded clutch cover later next week.
The "mod" on the clutch cover is simply a carrier bearing for the outboard end of the puller shaft.
Agreed.
Houston? You live in Houston? Is this where you have always lived?
____________
Made History @ Daytona and still one fast old man!!
|
entropy
Moderator
Posts: 8671
|
posted September 11, 2005 05:53 AM
Houston? you bet! The heart of the Mosquito coast.
the complete parts list is:
lockup hat,
modded pressure plate(steel buttons have been inserted)
modded clutch cover (has puller shaft carrier bearing)
spacer (between clutch cover & block)
longer clutch cover bolts
spacer for shift shaft
billet puller (longer)
When you make sure all is working, i would be happy to receive yr un-modded clutch cover & pressure plate (core items).
I'm giving you a killer deal because I just wanna know that I am part of the 210mph pass you WILL be making at Maxton
____________
This moderator uses moderation in moderation
|
Nukedog
Expert Class
Posts: 449
|
posted September 11, 2005 07:10 AM
quote:
6k isnt all that much RPM....especially if you want to be able to slide the clutch out of the hole.
I certainly wouldnt want mine to lockup completely at that rpm.
Cool - was just curious as i have heard people talk about the welded lever syndrom at 6k and i didn't experience it.
Thanks...
____________
02 Busa...Turbo...
09 YZF-R6S...
|
VincentHill
Needs a life
Posts: 6520
|
posted September 11, 2005 07:19 AM
Karl, for as much "Do do" as the people on Bikeland and other places had had to deal with, I think when I finally get there, the Smell of the air around the world will smell bad for a few minutes (Everyone Exhaling at the same time ) People like You, Mike, Dan and specially Jim Owen I owe a lot to. Heck I might go an entire month and not mention anything to do with being Black to show appreciation .
Thanks Karl No problem on the other parts.
____________
Made History @ Daytona and still one fast old man!!
|
junior s
Pro
?
Posts: 1644
|
posted September 11, 2005 09:33 AM
quote:
Karl, for as much "Do do" as the people on Bikeland and other places had had to deal with, I think when I finally get there, the Smell of the air around the world will smell bad for a few minutes (Everyone Exhaling at the same time ) People like You, Mike, Dan and specially Jim Owen I owe a lot to. Heck I might go an entire month and not mention anything to do with being Black to show appreciation .
Thanks Karl No problem on the other parts.
Your bike is black Vincent ?
I think EVERYBODY want's to see you go past 200 , and the way you keep secrets on how to do this is impressive to me , good luck dude .
____________
Get up off your ass and ride !!
|
VincentHill
Needs a life
Posts: 6520
|
posted September 11, 2005 11:33 AM
I hated Secrets when I raced AMA and I still hate them. Which is why win lose or draw everyone knows what I tried and what worked and what did not!
____________
Made History @ Daytona and still one fast old man!!
|
junior s
Pro
?
Posts: 1644
|
posted September 11, 2005 11:47 AM
And we appreciate it , thanks .
____________
Get up off your ass and ride !!
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 11, 2005 12:59 PM
Damn Karl...I start an 8week engagement in Houston in a few weeks.
How about some Beers? 
____________
Do not taunt happy fun ball!
|
entropy
Moderator
Posts: 8671
|
posted September 11, 2005 04:03 PM
quote:
...Heck I might go an entire month and not mention anything to do with being Black ....
Vincent,
From what I could see you seem to be changing color; it has started with your hair 
____________
This moderator uses moderation in moderation
|
entropy
Moderator
Posts: 8671
|
posted September 11, 2005 04:09 PM
Edited By: entropy on 11 Sep 2005 17:11
quote:
Damn Karl...I start an 8week engagement in Houston in a few weeks.
How about some Beers?
YCIS,
yo are ON!!
[Homer voice] beeeer...
BTW, The Texas Shootout (1 hr E of Houston) is on Oct 22, and the Texas Mile (3 hrs SW of Hou) is on Oct 22/23. Are you gonna be in Hou area then?? MadMike, Osti, Buddy will be in town then to enjoy the festivities, maybe you'd like to join up with us??
The weather has been dipping under 95F lately and may be even nicer by then.
____________
This moderator uses moderation in moderation
|
VincentHill
Needs a life
Posts: 6520
|
posted September 11, 2005 04:50 PM
Karl, You Hurt me Someone looking at my drivers License noted that my "Hair Color" was also wrong (No longer Black) SO I guess the statement that it won't rubb off was wrong the "Other" Way. If I turn white do I have to vote Republican 
____________
Made History @ Daytona and still one fast old man!!
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 11, 2005 06:15 PM
fook...I think I wrap up the engagement earlier that week...Ill see if I can swing sticking around for the weekend.
____________
Do not taunt happy fun ball!
|
entropy
Moderator
Posts: 8671
|
posted September 12, 2005 02:14 AM
quote:
Karl, You Hurt me Someone looking at my drivers License noted that my "Hair Color" was also wrong (No longer Black) SO I guess the statement that it won't rubb off was wrong the "Other" Way. If I turn white do I have to vote Republican
You one funny guy!!!
____________
This moderator uses moderation in moderation
|
entropy
Moderator
Posts: 8671
|
posted September 12, 2005 02:15 AM
quote:
fook...I think I wrap up the engagement earlier that week...Ill see if I can swing sticking around for the weekend.
yep, and bring yr turbo!!!
____________
This moderator uses moderation in moderation
|
osti33
Needs a job
Posts: 2973
|
posted September 12, 2005 04:43 AM
quote:
fook...I think I wrap up the engagement earlier that week...Ill see if I can swing sticking around for the weekend.
Yeah, you should see if you can stick around. It's going to be a good time. Probably no "Big Crab Whores" however...
|
Wideout
Expert Class
Posts: 300
|
posted September 12, 2005 07:45 AM
quote:
quote:
Damn Karl...I start an 8week engagement in Houston in a few weeks.
How about some Beers?
YCIS,
yo are ON!!
[Homer voice] beeeer...
BTW, The Texas Shootout (1 hr E of Houston) is on Oct 22, and the Texas Mile (3 hrs SW of Hou) is on Oct 22/23. Are you gonna be in Hou area then?? MadMike, Osti, Buddy will be in town then to enjoy the festivities, maybe you'd like to join up with us??
The weather has been dipping under 95F lately and may be even nicer by then.
Are y'all going to try and hit both events on the 22nd?
|
entropy
Moderator
Posts: 8671
|
posted September 12, 2005 08:59 AM
nope, not both events on the 22nd, too far
do the TXO on 10/22, go to Goliad on the 23rd
____________
This moderator uses moderation in moderation
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 12, 2005 10:34 AM
hahah..If I can find a way to fit the bike and my gear in my luggage....its on!
____________
Do not taunt happy fun ball!
|
|
|
HOME
NEW TOPIC