HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > DRAGBIKE ZONE.com > Thread: zrx dean 330 ft time NEW TOPIC NEW POLL POST REPLY
TRICKDADDY


Novice Class
Posts: 76
posted August 14, 2005 04:30 PM        Edited By: TRICKDADDY on 14 Aug 2005 17:31
zrx dean 330 ft time

Hey ZRXDEAN, TIMES AT 330 FT MARK 4.03 sec.

  Ignore this member    Click here to visit TRICKDADDY's homepage. Click here to send TRICKDADDY an AIM message. 
Nukedog


Expert Class
Posts: 449
posted August 14, 2005 05:29 PM        
Very nice TD. Did you do that at Jax today?

I will be trying for the 4.00 next Sat...
____________
02 Busa...Turbo...
09 YZF-R6S...


  Ignore this member   
TRICKDADDY


Novice Class
Posts: 76
posted August 14, 2005 07:45 PM        
No nukedog did it Wed. TNT, Never looked at it until DEAN asked me about it Saturday night..Have never run at track in Jville..
  Ignore this member    Click here to visit TRICKDADDY's homepage. Click here to send TRICKDADDY an AIM message. 
zrxdean


Needs a job
Posts: 2225
posted August 14, 2005 08:02 PM        
Good work TD If you can get in the 3s, you'll go 9.20s for sure. What's your gearing? Kevin likes 17/51, which should put you thru the traps at the top of fifth, and might bring down the 330.

Dean

  Ignore this member   
CrotchRocket


Moderator
Bracket Racing with Betsy
Posts: 8038
posted August 15, 2005 05:10 PM        
NukeDog a 4.00 in the 330 will put you around a 9.30 in the 1/4...

I have a few time slips with that 330.....4.007-330...6.040 -1/8, 120.49mph...7.758-990...9.317,150.03mph...

60' - 1.523...330-3.986...1/8-6.006, 120.82mph...990-7.708...1/4-9.251, 151.54...

60' - 1.519...330-3.964...1/8-5.981, 121.16mph...990-7.680...1/4-9.216, 152.04...

That was done on my 60" 12 on May 5, 2005 temp was 55 degrees...
____________
Jason Miller StreetBike Seminars

*****DragRacers do it better, because they dont cut Corners*****

  Ignore this member    Click here to visit CrotchRocket's homepage. 
matt sterbator


Pro
Hiding in the bushes
Posts: 1367
posted August 15, 2005 05:37 PM        
Damn Rick, I'd kill for temps like that right now, lol.

3.98-4.00 put me in the mid 9.30s (6.00s in the 1/8th).

  Ignore this member    Click here to visit Matt Sterbator's homepage. 
Nukedog


Expert Class
Posts: 449
posted August 18, 2005 04:45 AM        
quote:
NukeDog a 4.00 in the 330 will put you around a 9.30 in the 1/4...

I have a few time slips with that 330.....4.007-330...6.040 -1/8, 120.49mph...7.758-990...9.317,150.03mph...

60' - 1.523...330-3.986...1/8-6.006, 120.82mph...990-7.708...1/4-9.251, 151.54...

60' - 1.519...330-3.964...1/8-5.981, 121.16mph...990-7.680...1/4-9.216, 152.04...

That was done on my 60" 12 on May 5, 2005 temp was 55 degrees...



Yep - my buddy ran a 3.98 330' time when it was 90 degrees outside and went 9.24 on that run (1397 Busa).

I can't drive that good but hope to get there soon...
____________
02 Busa...Turbo...
09 YZF-R6S...


  Ignore this member   
KriSSten


Novice Class
Posts: 76
posted August 18, 2005 05:56 AM        
New Best....

R/T... 009
60 ... 1.589
330... 4.203
1/8... 6.327
MPH... 155.62
1/4... 9.736
MPH...142.83

YEAH!!!!

MY MPH SUCKS!!!

  Ignore this member   
Nukedog


Expert Class
Posts: 449
posted August 18, 2005 06:46 AM        
quote:
New Best....

R/T... 009
60 ... 1.589
330... 4.203
1/8... 6.327
MPH... 155.62
1/4... 9.736
MPH...142.83

YEAH!!!!

MY MPH SUCKS!!!


kriSSten was doing good last night - Matt has some good numbers as well. I sucked!!!
____________
02 Busa...Turbo...
09 YZF-R6S...


  Ignore this member   
zrxdean


Needs a job
Posts: 2225
posted August 18, 2005 06:50 AM        Edited By: zrxdean on 18 Aug 2005 07:51
It looks damn good in the 1/8th, not sure why it dropped off so much in the 1/4

Har har, KriSStem was riding the hell out of her stock wheelbase, piped & unmapped 12, especially considering the terrible HEAT and HUMIDITY. WTFG.

The track was pretty slippery in the first 60 feet, but the new head was pulling hard on the backhalf, I ran several 138mph 1/8ths and 174mph+ 1/4s, with a best of 8.62, with a spinning 1.67 short time. When I hook up, I should see low 50s or better.

A mixed blessing was identifying a serious oil issue - when I let off at the big end, my oil pressure fluctuates wildly - I'm pretty sure my oil is sloshing up against the front of the reservoir and feeding my pickup air. I can't engage my lockup until the revs fall, so I'm stuck watching - very painful. Never focused on the oil pressure much after the run before.

Tracy at Speedfab is going to install a trap door in my tank and hopefully that will stop it. I hear Muzzys had the same problem with their ZX12 shootout bike, cost them a lot of bearings. Hope my crank & rods are OK, I will find out this weekend. There was the beginnings of bearing material in the filter last night

Dean

  Ignore this member   
TRICKDADDY


Novice Class
Posts: 76
posted August 18, 2005 05:11 PM        
DEAN YOU DA MAN!!!!!Krissten you are the bomb,when i grow up i want to ride like u!!!
  Ignore this member    Click here to visit TRICKDADDY's homepage. Click here to send TRICKDADDY an AIM message. 
CrotchRocket


Moderator
Bracket Racing with Betsy
Posts: 8038
posted August 18, 2005 06:46 PM        Edited By: CrotchRocket on 18 Aug 2005 19:51
Matt, I would be happy with 70 degrees!!!

Dean, thats awesome in this weather...

You guys are cruisin too...The heat is a killer after the 330...

In the 90+ degree heat and humidity up here in NYC, my fastest was a 330- 4.07, 1/8- 6.12 @ 120, 1000- 7.89, 9.41 @ 147...The bike bogs from all this heat...

I took 2 weeks off, last saturday at 5:30pm it was 100 degrees...
____________
Jason Miller StreetBike Seminars

*****DragRacers do it better, because they dont cut Corners*****

  Ignore this member    Click here to visit CrotchRocket's homepage. 
ricksgsxr


Zone Head
Posts: 511
posted August 21, 2005 11:48 AM        
quote:
New Best....

R/T... 009
60 ... 1.589
330... 4.203
1/8... 6.327
MPH... 155.62
1/4... 9.736
MPH...142.83

YEAH!!!!

MY MPH SUCKS!!!



Belated SINCERE congrats. I don't get here that often.

Is Valdosta worth the drive over Gainesville? not that i'm ready for it, just curious if the TnT and track conditions more favorable over Gainesville.

Rick

  Ignore this member   
Nukedog


Expert Class
Posts: 449
posted August 22, 2005 07:41 AM        Edited By: Nukedog on 22 Aug 2005 17:29
I had a 4.08 on 1 run Sat night but they had the back half closed so my 1/8th ended up being a 6.14 on that run. The track was awesome Sat night. But on each run i lost MPH on the back half for a total of 4mph loss throughout the night - i think the clutches died again...
____________
02 Busa...Turbo...
09 YZF-R6S...


  Ignore this member   
ricksgsxr


Zone Head
Posts: 511
posted August 22, 2005 08:29 AM        
You are all too dedicated and hardcore or trying to lose weight I went out to Ferindina at noon and it was hot in Joe Rocket ventilated gear.

Rick

  Ignore this member   
TRICKDADDY


Novice Class
Posts: 76
posted August 23, 2005 02:23 PM        
thats pretty darn good Mr.ND,i only made 1 pass WED. at TNT and my clutches were toast ,new ones should b here tomorrow.Will put them in when i get off work. HOPEFULLY i will get chance to run if it doesnt rain, will let u know outcome...
  Ignore this member    Click here to visit TRICKDADDY's homepage. Click here to send TRICKDADDY an AIM message. 
Nukedog


Expert Class
Posts: 449
posted August 24, 2005 03:18 PM        
Have fun tonight TD - i will try to be there next Wed night...
____________
02 Busa...Turbo...
09 YZF-R6S...


  Ignore this member   
TRICKDADDY


Novice Class
Posts: 76
posted August 24, 2005 08:02 PM        
Didnt get to run 2nite,will definetly b at TNT next WED..
  Ignore this member    Click here to visit TRICKDADDY's homepage. Click here to send TRICKDADDY an AIM message. 
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > DRAGBIKE ZONE.com > Thread: zrx dean 330 ft time NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.20998501777649 seconds processing time