matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted June 05, 2005 12:09 AM
 Edited By: matt sterbator on 5 Jun 2005 01:09
Birthday present...
Got a pretty nice birthday present today from the ticket booth lady 
.003
1.505
3.945
5.990 @ 120.05mph
9.298 @ 146.55mph
Anyone got a nitrous map for a 13.5:1 1287cc w/stock cammed Carpenter head ?
Looks like my first attempts to spray it into the 8's will be at the grudge race 
   
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted June 05, 2005 12:17 AM
BOOYAAAAA
____________
Do not taunt happy fun ball!
|
entropy
Moderator
Posts: 8671
|
posted June 05, 2005 02:33 AM
Matt:
in the 9.20's!!!! go TFA, GO!!!, nice 60!!!!; whatta light!
how long is yr bike???
____________
This moderator uses moderation in moderation
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted June 05, 2005 04:30 AM
Nice one Matt !!!
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted June 05, 2005 04:40 AM
ANd he's still running the heavy assed stock rim in the back too!
|
Tanner
Parking Attendant
Posts: 28
|
posted June 05, 2005 06:19 AM
Good job Matt!
____________
It ain't braggin M*th*r F*ck*r if you back it up!
|
zrxdean
Needs a job
Posts: 2225
|
posted June 05, 2005 08:10 AM
Great job, and good on ya for waiting for the 5 sec 1/8th before spraying. Maybe you can squeeze in at SMTW for at least a couple WOT 'safety' pulls?
Dean
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted June 05, 2005 08:45 AM
Karl, it's right around 64in. Gonna be a tad shorter for the grudge race, because I'm gonna run my Marchesini w/Supercorsa (46t) vs a stock rim and Shinko I've been running. 17/48 with the stocker, and I only have a 46t for the Marchesini, so I'll have to take one link outta the chain so it'll fit. It hits the limiter right past the first cone in the traps (hence the relatively low trap speed). Funny about the light, in the past month or so, we've really been hittin the tree hard, and over the past two weeks I've gotten TWO perfect .000 lights
Dean, I may just do that to get some kinda idea what the A/F is doing. I'm gonna try to steal the FJO wideband from Tracy for a few hours (shhhhh)
|
rac4it
Needs a job
Bergie
Posts: 3009
|
posted June 05, 2005 05:46 PM
Congrats! I can't wait to ride it
|
osti33
Needs a job
Posts: 2973
|
posted June 05, 2005 05:47 PM
Edited By: osti33 on 5 Jun 2005 18:48
quote:
Got a pretty nice birthday present today from the ticket booth lady
.003
1.505
3.945
5.990 @ 120.05mph
9.298 @ 146.55mph
Anyone got a nitrous map for a 13.5:1 1287cc w/stock cammed Carpenter head ?
Looks like my first attempts to spray it into the 8's will be at the grudge race
Nice numbers!
How much are you looking to spray?
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted June 06, 2005 11:35 AM
40 shot (or thereabouts) 
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted June 06, 2005 02:12 PM
40 shot...40 jet...same thing right?
____________
Do not taunt happy fun ball!
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted June 06, 2005 02:24 PM
Not gonna be any kinda nitrous nothin' if I can't get a laptop to map it. As it is I'll be mapping in the blind without a wideband or dyno. I also really want to get some CR10EKs to be safe, but finding something as simple as a NOS nozzle in this town has proven to be a waste of time, so who knows if I can find those plugs. I doubt I'll even attempt the put the EFIR on it before Thursday. I may just shitcan the project until we get back and shoot for Gainesville.
If it were a stock motor it'd be easy, but I'm limited on time and I'm leary of "guessing" on this motor.
Anyone got any suggestions as far as timing and fuel is concerned ?
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted June 06, 2005 03:32 PM
heh...+45 in every cell above whatever RPM you decide to spray in was what I did.
rich is way better than lean
I had to order my 10EKs from ronayers...but its possible autozone can get you some in a day if you call (probably kept in warehouse but not on shelf).
I have the PC3 software on my laptop....Ill be bringing it with me on the trip as well and we can modify your custom map at the track if you like.
Whats wrong with the nozzle that came with the kit I sold ya? If that wont work...tracy has a shitload of nozzles in his cabinet if im not mistaken.
____________
Do not taunt happy fun ball!
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted June 06, 2005 03:33 PM
oh and at worst case...you can clean/reuse the 10EKs that came outta my bike if tracy still has them. He put some different ones in the bike for the Trubo.
____________
Do not taunt happy fun ball!
|
zrxdean
Needs a job
Posts: 2225
|
posted June 06, 2005 04:31 PM
You won't need 10s to run a soft shot like that MS, don't lt that stop you. You only need colder plugs when you REALLY start spraying. Which will be in about a month I'm guessing
Dean
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted June 06, 2005 04:40 PM
The nozzle is stripped beyond repair. So no way I could drill and tap a hole for it in the frame. Right now I've got it in one of the ram air tubes, should hold. I'll call Tracy and see what he's got though (and see if he's still got the plugs). I've got to go out there anyway and get the macaroni rim so I can put the supercorsa on it.
I've got plenty of fuel available with the Muzzy pump, it's the timing I'm concerned about.
|
Nukedog
Expert Class
Posts: 449
|
posted June 06, 2005 04:43 PM
Hendersons has CR10EK's in stock.
I saw that run and it looked good!!!
____________
02 Busa...Turbo...
09 YZF-R6S...
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted June 06, 2005 04:53 PM
Dean, even with the higher compression ?
|
krexken
Zone Head
Posts: 732
|
posted June 06, 2005 05:30 PM
Edited By: krexken on 6 Jun 2005 18:32
I just upped the PC3 a few bars when I sprayed my 1361 with a 40 shot.
On another note, a friend of mine has been spraying around a 80 shot(dry). It's enough to make his 1270 go 165 or better! Currently his motor is scattered in my shop waiting on new bearings. Mainly the #3 rod bearing. His pistons look fine.
Nice riding, BTW.
|
zrxdean
Needs a job
Posts: 2225
|
posted June 06, 2005 07:13 PM
quote:
Dean, even with the higher compression ?
Sure. With a small shot, if you run good gas you won't even need to pull timing. Prepare to be hooked.
Dean
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted June 06, 2005 07:22 PM
I take it the 93 octane pump gas I've been using doesn't qualify as "good" gas, lol.
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted June 06, 2005 07:25 PM
C16?
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted June 06, 2005 07:43 PM
Heh, sure, know where I can get some ?
I would like to make SOME passes on motor, lol.
Steve if you wanna set out those steels, I'll blast them tomorrow or Wed. (your cell is dead).
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted June 06, 2005 07:54 PM
Ok.... put them under the trailer.
|
|
|
HOME
NEW TOPIC