1bad12r
Zone Head
Posts: 567
|
posted November 02, 2004 02:25 PM
5mm stroke, Stk pistons ?
What cc would this be ? And how much hp could this produce ?
____________
768 Ryderz
------------
  
|
Ra12r
Zone Head
Posts: 919
|
posted November 02, 2004 06:01 PM
What is wrong with your cylinders?
____________
All must bow to the "Ra Supremecy"...
|
1bad12r
Zone Head
Posts: 567
|
posted November 03, 2004 04:36 AM
Nothing
Nothing, just curious.
____________
768 Ryderz
------------
|
johnnycheese
Pro
Posts: 1008
|
posted November 03, 2004 05:50 AM
this is a 2 correct?
so the stroke would be 60.4x83 bore.
|
johnnycheese
Pro
Posts: 1008
|
posted November 03, 2004 05:56 AM
1307 cc and it would make torque but not alot of HP
|
bossman12r
Zone Head
Posts: 513
|
posted November 03, 2004 11:39 AM
I have heard of people doing a 5mm stroke and still being able to use the stock starter. But what all has to be grinded to make it work? And how much off the case needs to be grided off?
____________
gen 4 zx10 is fast
|
johnnycheese
Pro
Posts: 1008
|
posted November 03, 2004 02:00 PM
on a stock bore the differance between a 4.6 and a 5.0 stroke is
1298 for the 4.6 and 1307 for the 5.0 not worth the hassel
|
Ra12r
Zone Head
Posts: 919
|
posted November 03, 2004 05:46 PM
Bossman, it depends on which rods you go with.
____________
All must bow to the "Ra Supremecy"...
|
bossman12r
Zone Head
Posts: 513
|
posted November 03, 2004 06:27 PM
I know alot of people dont like the stock rods but that is what I would be using.
____________
gen 4 zx10 is fast
|
1bad12r
Zone Head
Posts: 567
|
posted November 03, 2004 11:45 PM
Thanks all !
____________
768 Ryderz
------------
|
|
|
HOME
NEW TOPIC