ninja12
Needs a job
Posts: 3310
|
posted June 11, 2004 11:44 AM
what's you best ?
My 60s are coming down.
My best 60' is a 1.46 with a 6 over arm.
many 1.48 this year. I'm 200lbs suited.
best et is 8.87@160 on gas.
Post your best run and bike lenght.
my bike is 6 over with nos
60' 1.487
330 3.848
1/8th 5.77
mph 127.32
1/4 8.87
mph 160.1
  
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted June 11, 2004 02:09 PM
Stock length.
60' 1.75
330 4.4xx
1/8th 6.52
mph 118
1/4 9.81
mph 153.3
____________
Some day, you're going to run out of some days
|
chavcat
Zone Head
Posts: 524
|
posted June 11, 2004 02:16 PM
best times
Stock wheelbase & motor
60' 1.702
330' 4.39
1/8 6.49
mph 117.32
1/4 9.82
mph 146.93
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted June 11, 2004 07:37 PM
57" WheelBase, see below for mods. I weigh 196lbs. fully suited...
60' - 1.606
330 - 4.160
1/8 - 6.218
mph - 120.28
1000 - 7.994
1/4 - 9.505
mph - 149.88
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
lorcan
Expert Class
Posts: 327
|
posted June 12, 2004 01:25 AM
66" 1270 motor only
60' 1.476
330' 3.93
1/8 5.98 @ 119.29
1000' 7.712
1/4 9.288 @ 149.39
Just about to fit a sidewinder, longer links and a BTC progressive gas kit (~70hp).
|
1bad12r
Zone Head
Posts: 567
|
posted June 13, 2004 05:24 AM
R/T- .163
60"- 1.51
330- 3.93
1/8- 5.92@122.6 mph
Bike is 61", 1375 motor.
____________
768 Ryderz
------------
|
kzz1
Zone Head
"Show me whatcha workin with"
Posts: 908
|
posted June 13, 2004 10:46 AM
62" 1397 Busa (Motor)
1.528 ..60 ft
3.927 ..330ft
5.875 ..1/8 ET
126.42 .1/8 mph
7.554 ..1000ft
8.984 ..1/4 ET
156.84 .1/4 mph
62" ZX1270 (NOS)
60... 1.58
330.. 4.076
1/8.. 6.022
MPH.. 127.42
1000. 7.685
1/4.. 9.097
MHP.. 159.09
ZX12Girl
(using Kzz1's log-in)
|
Nukedog
Expert Class
Posts: 449
|
posted June 14, 2004 09:41 AM
62" Busa with Full Yosh RS3, BMC, lowered,strapped,clutch mod...
1.70
4.27
6.39
116 mph
8.23
9.79
143 mph
____________
02 Busa...Turbo...
09 YZF-R6S...
|
Ra12r
Zone Head
Posts: 919
|
posted June 15, 2004 05:20 AM
56" 01 R6 lowered and strapped
60...1.69
1/8...6.970
105 mph
____________
All must bow to the "Ra Supremecy"...
|
AnotherRedHead
Expert Class
Posts: 348
|
posted June 15, 2004 06:28 AM
60" turbobusa
1.68
4.09
5.97 @ 132
8.99 @ 159
Best 1/8th is
1.54
3.98
5.80 @ 133
Hoping to improve 10fold in the next few week, crazy new susp. mods.... 
|
jay
Parking Attendant
Posts: 9
|
posted June 15, 2004 11:19 AM
Stock wheelbase Busa Hindle,no pc,stock filter, lowered and strapped.
1.582
4.147
6.290@114.53
|
zrxdean
Needs a job
Posts: 2225
|
posted June 15, 2004 12:53 PM
63" ZRX1100 all motor;
1.55
3.97
5.97 @ 122
9.23 @ 147
63.5" ZRX, spraying;
1.48
3.91
5.78 @ 130
8.77 @ 163
I went 8.83 last month before pulling the nitrous off and installing the turbo. It will take a while to relearn the bike, but hopefully I can post a new best this fall.
|
krexken
Zone Head
Posts: 732
|
posted June 15, 2004 02:36 PM
62" ZRX1278
1.57
6.07
9.36
153(extremely wind aided but I'm not complaining)
several 9.5s at 145
|
zrxdean
Needs a job
Posts: 2225
|
posted June 15, 2004 05:11 PM
What about the ZX12 Ken?
|
RAC4IT
Needs a job
Bergie
Posts: 3009
|
posted June 16, 2004 03:20 AM
5, 10", 195lbs not including gear +/- 205 suited
9.59 ET @ 149.66 MPH 100% stock motor & wheelbase, 17/46 gearing, muzzys pipe, 167rwhp
9.48 ET @ 153 MPH stock wheelbase, lees motor, 18/44 gearing, muzzys pipe, 200rwhp
8.85 ET @ 161 MPH 63" wheelbase, 18/44 gearing, muzzys pipe, 244rwhp
|
ninja12
Needs a job
Posts: 3310
|
posted June 16, 2004 06:52 AM
Wow ZREX in the house. I bet you both suprised alot of people with those time.
8.85 ET @ 161 MPH 63" wheelbase, 18/44 gearing, muzzys pipe, 244rwhp
18/44 That sounds Extremely hard to launch. what rpm?
Help me to understand why you geared it like that. Top speed run?
BTW nice times.
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted June 16, 2004 07:04 AM
yea...thats maxton 200+ gearing there 
____________
Do not taunt happy fun ball!
|
RAC4IT
Needs a job
Bergie
Posts: 3009
|
posted June 16, 2004 10:55 AM
i never bothered to change my gearing from maxton, no need to. yes it would have gone quicker, but I ride a street bike that will go 200+ mph, 8.8s in the 1/4mi @ 161 and cruise at 80mph at very low rpm, all with no changes in ride height, gearing or mapping. It's not a race bike
|
krexken
Zone Head
Posts: 732
|
posted June 16, 2004 02:31 PM
00 zx12-1361
1.62
9.25
158mph stock arm, chain, 16-46
1.52
8.91
158mph 4" over, same as above
1.55
8.81
162mph 6" over, same with dry shot.
I weighed around 176 back then. I'm pushing 200lbs now. Married life is good. Did I mention she works in a Chinese food restaurant?
|
ninja12
Needs a job
Posts: 3310
|
posted June 16, 2004 03:46 PM
 Edited By: ninja12 on 16 Jun 2004 16:48
First, that's hauling the mail!
Are you sure that dry shot was working RIGHT?
bottle pressue low?
1 tenth and 4mph is low. me thinks
|
krexken
Zone Head
Posts: 732
|
posted June 17, 2004 03:23 AM
I never got to use the dry shot with good track/weather conditions. It would normally run 8mph faster with it.
|
entropy
Moderator
Posts: 8671
|
posted June 19, 2004 12:22 AM
68" ZX12 - all motor; 220# suited
60'______1.496
330'_____3.811
1/8______5.719
1/8 mph__128.58
1000'____7.379
1/4______8.790
1/4 mph__159.10
"soft" launch; it's done 1.45's in the recent past; might even have an 8.6 hidden away somewhere after the 48mm TB's and Marvics are mounted
____________
This moderator uses moderation in moderation
|
ninja12
Needs a job
Posts: 3310
|
posted June 20, 2004 08:29 AM
128 1/8 on motor.
congrads to you and cheeseman.
|
entropy
Moderator
Posts: 8671
|
posted June 20, 2004 10:59 PM
thx Ninja12. It's got a little more to go, but we are in the right direction!
____________
This moderator uses moderation in moderation
|
AnotherRedHead
Expert Class
Posts: 348
|
posted June 21, 2004 01:37 PM
Karls shit rocks, esp for his weight. Im putting Marvics on my busa here in the next few weeks too Karl
|
|
|
HOME
NEW TOPIC