NINJAFREEK2
Parking Attendant
Posts: 22
|
posted March 30, 2004 01:30 PM
BEST 60 FOOTS
Well at the last shootout I had two 1:50's back to back.I had only did a 1:50 a couple of times before. I guess the clutch was perfect. It had about 10 passes on it.
It's a 2000 1290 at 60in.
Oh yea might be selling it, if anyone intrested.
It's clean and have much $$$$$ in it.
  
|
RAC4IT
Needs a job
Bergie
Posts: 3009
|
posted March 30, 2004 01:34 PM
1.5ooooh or 1.59? Both are considered "1.5's" but there's a big difference, are you saying you went back to back 1.5(zero) that's pretty impressive for short wheelbase. What was your final ET on those runs?
|
BA
Pro
Posts: 1592
|
posted March 30, 2004 02:39 PM
no doubt, a 1.50 would be very good, especially twice! 
|
NINJAFREEK2
Parking Attendant
Posts: 22
|
posted March 30, 2004 03:02 PM
60's
Yea Bergie, it was 2 1:50(ZERO) worst of the day was 1:55 it was in the 60in class at the TEXAS SHOOTOUT.
Bike ran 8:90's all day.
Best 8:92 5:91 1/8 @129mph
The thing was doing the short times, all day long.
Best mph was 163mph on that 1:55 60 foot.
The quicker 60's had lower mph as you know.
On the 40shot as soon as I shifted 2nd.
The only wheelie of the day was in the third round,had to get out of it and went 9:04 and lost.
I had SHINE the next round,and he was a couple of tenths faster.
Put SPAZ out 2nd round.
|
krexken
Zone Head
Posts: 732
|
posted March 30, 2004 08:01 PM
 Edited By: krexken on 30 Mar 2004 20:05
1.50s? Dayum, my 62 inch long zrx does 1.45s all day long. Oh, I thought you was talking bout reaction times. Actually I got my two best 60's this weekend also: 1.55, 1.56. Best 1/8 ever: 6.09 at 121 and best et 9.36 at 153(lots o wind). Backed it up? with a 9.44 at 147.
Yep, that wheelie cost you that race, probably. Ah well. Your ahead of Gbusa on points anyway.
Get that new big bad Red bike yet, Kelly? And are you gonna make it Red River this weekend? I may have to come down there and put a thumping on all you south La. boys if not.
|
RAC4IT
Needs a job
Bergie
Posts: 3009
|
posted March 31, 2004 03:52 AM
good riding!
|
ninjafreek
Novice Class
Posts: 98
|
posted March 31, 2004 05:21 AM
Doubt I make it Ken,I can't afford to take too much time off,I getting ready to start my new house and shop so I'll
need to save my time off for that project.
If you know anyone intrested in the 60in. I thinking of selling it also.I did sell my stock 01 last week.
Still waiting on the new 1000 it may be in today.
|
bossman12r
Zone Head
Posts: 513
|
posted March 31, 2004 05:24 AM
Anyone know that the times for the 2 Highland 12's where? So what are you going to get if you sell the 60" 12?
____________
gen 4 zx10 is fast
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted March 31, 2004 07:18 AM
NinjaFreek, how much weight did you have on the front?
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
NINJAFREEK2
Parking Attendant
Posts: 22
|
posted March 31, 2004 08:15 AM
No (0) weight added, I've looked many times and haven't found a good place to add it, and still be legal.
Bossman give me a call later.
|
AnotherRedHead
Expert Class
Posts: 348
|
posted March 31, 2004 12:56 PM
plenty of space behind the header
|
NINJAFREEK2
Parking Attendant
Posts: 22
|
posted March 31, 2004 01:40 PM
CAN IT BE ATTACHED THERE USING 3/8 BOLTS? LIKE THE RULES STATE. i SCARED TO HANG WEIGHT ON THE HEAD OR CYLINDER.
|
ninja12
Needs a job
Posts: 3310
|
posted March 31, 2004 09:38 PM
what are our option?
what, how much weight, where to get it, and how much $ ?
anyone know details about wheel weight?
|
zrxdean
Needs a job
Posts: 2225
|
posted April 01, 2004 07:23 AM
Great short times, congrats NF.
KEN:: I guess you got the ZRX tuned up, huh? 153 on motor????? 9.36 on the brick? AWESOME!!!!
|
AnotherRedHead
Expert Class
Posts: 348
|
posted April 01, 2004 09:43 AM
You have to build the box yourself or I can tig weld one up. Buy some shot from a gun store, melt lead for ballast. I cant tell yu how much weight, you have to figure that out yourself.
Wheel weights suck. I know someone that had them on his bike, would only run 138 on motor, 170rwhp....my zx12 would constantly run 147-148 all motor, no weight....rotating mass doesnt seem to work very well, unless you have the power to pull it. Just put the weight on your motor or frame.
|
krexken
Zone Head
Posts: 732
|
posted April 01, 2004 07:47 PM
Houston Raceway Park and a really nice tailwind equals Mother Nature's supercharger!
|
ninja12
Needs a job
Posts: 3310
|
posted April 02, 2004 08:41 AM
ARH how much would your ballast box cost?
What would the max weight be?
Anyone have pics of a ballast box on a zx12?
|
AnotherRedHead
Expert Class
Posts: 348
|
posted April 02, 2004 10:10 AM
I bet we could fit 30-50lbs down there somewhere. I seen some of schnitz's bike somewhere
|
bossman12r
Zone Head
Posts: 513
|
posted April 02, 2004 10:38 AM
Edited By: bossman12r on 3 Apr 2004 20:17
Yes he did but now someone else has it since Ryan sold his 12.
____________
gen 4 zx10 is fast
|
ZX12Girl
Pro
Adrenaline Junkie
Posts: 1740
|
posted April 03, 2004 05:59 AM
Best 60 ft. =1.45 (only once ).....then 2nd gear flyswatter action.
Now I am lucky to see 1.5's.
____________
Life is an adventure. Are you driving?
|
RAC4IT
Needs a job
Bergie
Posts: 3009
|
posted April 03, 2004 07:24 AM
|
NINJAFREEK2
Parking Attendant
Posts: 22
|
posted April 03, 2004 07:35 AM
Damm that looks nice did you notice exactly how and where it was attached.
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted April 03, 2004 08:01 AM
Looking at the picture.. you can add even more weight too. 
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
RAC4IT
Needs a job
Bergie
Posts: 3009
|
posted April 03, 2004 10:02 AM
It's attached to the oil pan using bolts and attached to the header using band clamps. I have more detailed photos just not hosted.
|
BA
Pro
Posts: 1592
|
posted April 03, 2004 11:35 PM
it doesn't look like the stock plastic would fit around that!
|
|
|
HOME
NEW TOPIC