posted December 17, 2003 05:33 AM
Anyone have an Airtech connection? Shoot me a PM or email! THanks!
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
Needs a life
living life, and loving it.
Posts: 7981
posted December 17, 2003 05:42 AM
I dont know what you are looking for Steve, but I wouldnt use Air Teck on Barts Ruckus.....my buddy bought a set of Air Tech bodywork for his 01 ZXZ6R racebike, by the time we got dont cutting it just so you could bolt it to the upper, it was no longer race legal....the fit and finish sucks really bad......just my expierence and it was only one time.....But the shark skins on my 01 ZX6R fit great, and they look a lot better.......
____________
When in doubt, lean farther and go faster....
posted December 17, 2003 06:23 AM
My Streamline tail section came from them! Excellent work, but the Owner's sister is married to one of my best friends??
____________
Made History @ Daytona and still one fast old man!!
posted December 17, 2003 08:13 AM
Got any suggestions for EX500 bodywork then?
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
posted December 17, 2003 09:38 AM
The Belly Pan that Randall got from them was 1st rate! What are you looking to buy?
____________
Made History @ Daytona and still one fast old man!!
posted December 17, 2003 03:17 PM
Upper (race) and rear tail section (race) For a 1990 EX500. Can you (or Randall) get me a price V?
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
posted December 17, 2003 05:52 PM
swft,...Is air tech the same as A tech , or whatever that is hanging in my garage? btw, find any fasteners lying around?
____________
uh oh
posted December 17, 2003 07:32 PM
Only problem is Sharkskinz doesnt have an application.
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
Needs a life
living life, and loving it.
Posts: 7981
posted December 17, 2003 08:05 PM
Steve, let me make a post on another board to a guy that use to race Ex500's, let me find out what he used....I will get back with ya as soon as I find out....
____________
When in doubt, lean farther and go faster....
posted December 17, 2003 08:22 PM
Thanks HDL.
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
Needs a life
living life, and loving it.
Posts: 7981
posted December 18, 2003 05:47 AM
Steve, I am sorry to tell ya, that he had no answer for ya, they werent required to use them when he was racing.....all I can suggest is calling places like Hotbodies, Targa, Sharkskinz....part411.com might have something for ya....I just hate Airtech, and Craig is putting his 6R race bike together and tried the airtech, and it was shit, then tried Hotbodies, and they were shit, so he is with Sharkskinz right now....sorry bro, if I see anything I will holler at ya....
____________
When in doubt, lean farther and go faster....
posted December 18, 2003 01:20 PM
I will call Randall today. He now works for Cycle World in Baltimore! Upper race and rear race!
____________
Made History @ Daytona and still one fast old man!!
posted December 18, 2003 02:44 PM
Thanks Vince.
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
posted December 18, 2003 02:55 PM
TB, I just got a call from Randall! The "Dealer" price is only about 5% less than the list!
The front section is about $210. The tail section is $207 and the "Under Seat" part is $159. So about $417 for what you asked about and $576 for everything except the Chin Fairing!!
Personally I like his work, but "I Think" Everything is made for Race (Read very thin) and on the "Street" stuff, all it means is that they cut out the parts for places like the headlight and turn signals! Randall had an EX500 and crashed it both with stock and with AirTech! Trust me, the AirTech held up 100% better and could be repaired! The stock was like a crystal glass. Broke into many pieces! The glass work is very good, vs something like Targa where it is moulded Plastic!
____________
Made History @ Daytona and still one fast old man!!
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted December 18, 2003 04:25 PM
Dino - A Tech makes World Superbike bodywork and is based out of Japan. AirTech makes crap, and the bodywork is made in Mexico.
____________
82 Gpz750, 84 Ninja 900, 2000 ZX12R (Muzzy Big Bore Kit), *another* 2000 ZX12R (Muzzy custom stroke crank 1341cc motor), 2004 ZZR1200, 2005 ZX10R, 2007 ZX14, 2008 Concours 14, 2014 Versys 650, 2014 Yamaha WR450F, 2015 Ninja H2
HOME
NEW TOPIC
posted December 17, 2003 05:33 AM
