HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: Oil Filter coming loose!!! NEW TOPIC NEW POLL POST REPLY
ninja12


Needs a job
Posts: 3310
posted November 12, 2003 02:37 PM        
i had the problem with the auto filters twice it was with the same brand of filter from the same store. auto zone dulutch (sp) never again have i used that brand and the problem has never happened again. I said all that to ask are you using OEM kaw filters?
If so maybe a bad batch got out.

  Ignore this member   
your car is slow


Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
posted November 12, 2003 02:43 PM        
Along those same lines.....the latest batch of filters I got from ronayers are now sealed in plastic

Every one ive gotten till now was just a filter in the box...have they always been sealed in plastic and ron ayers has just been sending me returned items that had already been opened?

Or is the sealing gimmick a new thing?
____________
Do not taunt happy fun ball!

  Ignore this member    Click here to send Your Car Is Slow an AIM message. 
k bryant


Needs a job
Sponsor
Posts: 2911
posted November 12, 2003 04:48 PM        
When I bought my 03, in 11/02, I bought some filters when I picked up the bike. They were all sealed in plastic. Everyone I've bought since then have been sealed as well. So I can go back as far as November of 02 on the sealed in plastic thing. Have always bought OEM from Kaw dealer.
  Ignore this member    Click here to visit K Bryant's homepage. 
swft


Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted November 12, 2003 05:44 PM        
One thing I remember about Necro's filter coming loose on his ZX6R. The pipe that goes into the engine was loose. That's sposed to have a godawful amount of torque on it, something like 90 lb/ft. His was 'hand tight'.
  Ignore this member   
necro


Needs a job
My Grandma Is A Virgin
Posts: 2148
posted November 13, 2003 02:28 PM        
Yes. A friend ended up using Red Lock Tite on it.
____________
3829

  Ignore this member   
swft


Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted November 13, 2003 08:14 PM        
Was that Dave? Can't remember.
  Ignore this member   
necro


Needs a job
My Grandma Is A Virgin
Posts: 2148
posted November 13, 2003 09:03 PM        
Yes. He felt bad, but it he had nothing to do with it.
____________
3829

  Ignore this member   
keith


Expert Class
Posts: 155
posted November 14, 2003 08:49 AM        
The 03 ZX636 has an oil filter fixing device on it from the factory. Wonder if it will be on the 04 12R when it comes. Keith
  Ignore this member   
Ra12r


Zone Head
Posts: 919
posted November 14, 2003 02:37 PM        
Well,,,,finally cleaned up oil off the bike today. Checked the oil filter/oil cooler attachment nut/bolt and it was plenty tight. Drained the remaining oil,(~2quarts) looking for signs and saw just a couple of sparkles. At this point i was still feeling pretty good that no damage had been done yet. So I refilled with some new oil and was thinking i could head for the track shortly. Started the motor, brrmm,,,,,shut off(cold) turr rurr,,,brrmmm,,,,,,,NCK NCK NCK NCK NCK NCK,,,,,shut off! tried again,,,,,turr rurr,,,brrmmm,,nock nock nock,,,shut off!! cried a minute,,,,then tried again and it got quiet and sat there idling real normal!!!

moral to the story: Don't let your oil blow out your motor, all down the bike and your shoes with smoke while doing 11,000 rpms at over 140mph or it will make your motor knock when it is cold!!!
____________
All must bow to the "Ra Supremecy"...

  Ignore this member   
ninja12


Needs a job
Posts: 3310
posted November 14, 2003 09:09 PM        
If you really want to know pull the oil pan.
Seems like a lot of trouble, but it's the ONLY
way to really catch the problem early without sending out for
oil analyst. The brass (bearings material) will stay in the pan until
major damage to the bearing provide enough pieces for everyone to see.
It's like rats if you see a few pieces you probably have alot.

  Ignore this member   
keith


Expert Class
Posts: 155
posted November 15, 2003 04:10 AM        
This is a pic of the ZX636B1 oil filter clamp. Part no 92171-0082. I'm going to see if it will fit my 12 when I've finished the rebuild. Keith


  Ignore this member   
swft


Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted November 15, 2003 05:31 AM        
Cool, I don't see why it won't fit!
  Ignore this member   
necro


Needs a job
My Grandma Is A Virgin
Posts: 2148
posted November 15, 2003 09:12 AM        
The 6 and 12 use the same oil filter. I don't know about the 636 though.
____________
3829

  Ignore this member   
keith


Expert Class
Posts: 155
posted November 15, 2003 09:36 AM        
Yes - the oil filters the same but on the 636 (03) there is a place for the little lug on the strap to fit into the crankcase. Haven't had a look yet on my 12 but I think its a bit tidier than a jubilee clip. Might have to mod something to make it work. Keith
  Ignore this member   
All times are America/Va [ This thread is 2 pages long: 1  2   ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: Oil Filter coming loose!!! NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.2437219619751 seconds processing time