JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 12:40 PM
installed my pipe, Headpipes are glowing!
I just Installed a Yosh Tri-oval with duplex headers on my 2002 and the headpipes glow at certain RPM's(Too lean I am sure) I am talking about going down the road! Thought I could wait to buy a Powercommander,What do you guys think. Not good Huh.
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 12:42 PM
Who has a Powercommander here in Washington or something, I have the next couple of days off, This sucks I want to go riding!!!!!!I don't want to pay 399.00 plus red label Shipping from some dealer!
|
TurboBlew

Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted September 24, 2003 01:00 PM
Ive got a brand new one... PC3r. I sell it to ya for $250. 2nd Day Air included. Or I can send it next day through the post office. Lemme know.
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 01:04 PM
It sucks to be in a rush, I thought you could run ours bikes without PC's, If I buy yours do you think I could ride the bike that way for now....Is it worth it. Is that PC for a 2002 I thought you had an older one that you were using,It is new you say, never used?
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 01:06 PM
You probably have the map I need since this pipe was on the same bike as the Yosh box you have.......
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 01:19 PM
This sucks, It's probably the last week of good weather here and I can't ride my bike
|
k bryant

Needs a job
Sponsor
Posts: 2911
|
posted September 24, 2003 01:32 PM
Pipes glowing is nothing to worry about too much. I can get them to glow within 30 seconds or so on the dyno on almost any single wall headpipe, regardless of the fuel curve.
I've heard of lots of people running without PC's. Many have removed the PC's and prefer it without. Personally, I recommend using them. But I don't think I'd worry about riding without one either.
|
your car is slow

Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 24, 2003 01:35 PM
Just running a tad lean....its not going to kill the bike. Just dont make a habit of running it at redline all the time
I know its hard...but it IS possible to keep the revs below 8k on a ride
____________
Do not taunt happy fun ball!
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 01:38 PM
I have read some of your posts kbryant and it seems you work on mapping bikes and with dyno's and know what you are talking about, I am going to get a powercommander soon,I just want to know I am not going to burn a valve or something before I get it. It runs good so it can't be too lean wouldn't it misfire or nibble? Has anyone dyno'd a 2002 without a Pc3 and monitored air fuel, I remember someone listing out wich areas run rich wich lean etc.
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 01:40 PM
Edited By: JoshDunn on 24 Sep 2003 14:41
Actually whats funny is 3500 seems to be really bad(red pipes), cruising through town,It was night so it may not be as bad as it seems. I LOVE MY BIKE THE PIPE SOUNDS SO RAD!!!! can I still use RAD?
|
TurboBlew

Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted September 24, 2003 01:55 PM
quote: ... It is new you say, never used?
Brand new from DynoJet. Never used or installed. All the cables, software, etc... never opened.
|
dougmeyer

Needs a job
moderated
Posts: 2713
|
posted September 24, 2003 02:02 PM
Normal. If you could see your pipes in the dark at 150 mph you'd crap.
Doug
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 02:07 PM
Thanks guys....And Doug sorry I didn't buy a Muzzy, no offense I just got a smoking deal on a used pipe. Thanks again for the tour, Saving my pennies for a Steering Stabilizer now.
|
dougmeyer

Needs a job
moderated
Posts: 2713
|
posted September 24, 2003 02:09 PM
No problem Brah...
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 02:12 PM
After all this crap I was about to ride over to Bend and get a new PC3 in person!!! Do you have YOSHI' MAPS
|
k bryant

Needs a job
Sponsor
Posts: 2911
|
posted September 24, 2003 03:08 PM
Josh, you can use the backfire/nibble (whatever nibble means...) as a general guideline to be true.
And shame on you for being a cheapskate. Ride over to Bend right now and buy a PC from Doug. Load the map for a Yosh from somewhere/somebody else. Support those who support us. If you whine enough, maybe Doug will sweeten the deal or throw in a sticker or something...
|
your car is slow

Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 24, 2003 03:35 PM
Are you saying your pipes glow at 3500 rpm?????
Ive seen pipes glow at high rpm (during racing etc)....but nearly idle? damn.
____________
Do not taunt happy fun ball!
|
TurboBlew

Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted September 24, 2003 03:41 PM
Josh.. you gonna post a picture of the sweet pipe or what???
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
k bryant

Needs a job
Sponsor
Posts: 2911
|
posted September 24, 2003 03:48 PM
ycis - Oh yea, 3500 rpm no problem. Definetly not considered "nearly idle". As Doug can attest, nothing looks more bitchin than having all the body work off a bike and the lights out in the dyno room. Makes for some very cool photos and doesn't hurt a thing. Well, unless you stuck your tongue on it.
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 04:00 PM
Wish I had a digital camera, it may be a week before I can get my buddy to bring his digital over and take a few pics. Sounds like a few people have run these bikes without PC#'s for awhile without damage. I went to a racing bike shop in town with a DJ250 and asked him his opinion, when he heard my pipes were glowing abit he freaked out and said they don't even glow on the dyno and I may have already done damage to the bike. I don't think he will be touching my bike.
|
k bryant

Needs a job
Sponsor
Posts: 2911
|
posted September 24, 2003 04:03 PM
Good advice to yourself. Steer clear of this "racing bike shop".
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 04:06 PM
How close are the dynojet maps, could I live with one and not have to have it tuned. I am at sea level
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 04:09 PM
K, Thats another thing, he suggested a PC3r but then admited he leaves the ign. map ZERO's,Said stock ign map was best for the street,I think he doesn't know.I asked him why a 3r when you use no timing?
|
k bryant

Needs a job
Sponsor
Posts: 2911
|
posted September 24, 2003 04:11 PM
I'd say yes. There are a lot of opinions about their maps. Personally, we've seen good results overall. But that's the beauty of the PC. Don't like it? Load up another one, no big deal.
|
JoshDunn

Expert Class
Posts: 373
|
posted September 24, 2003 04:15 PM
K, You are making me feel bad about not getting a PC3 from doug,I don't know what I am going to do yet but there are a few of them for sale from board members new in box for way cheaper than list......Gotta support our brothers too right.
|
|
|