Megabyte
Pro
Posts: 1047
|
posted May 04, 2003 05:25 PM
1361 Dyno Chart
I've searched the archives, and the links to all the 1361 Dyno Charts are bad. Could somebody post one, or point me in the right direction ?
Thanks,
____________
We First make our habits and then our habits make us.
  
|
catman12
Expert Class
Posts: 169
|
posted May 04, 2003 07:49 PM
 Edited By: catman12 on 4 May 2003 20:51
1361 chart
Hi I have my dynochart on my websight, Akrapovic Evolution system, top end "adjusted"(head ported), K&N filters.
This dynochart is the first time in the dyno, the bike will be mapped soon.
www.kiruna.se/~mgrape
then click in project2003 in the middle of the page... (the page is in Swedish)
/ Mikael from Sweden
____________
6.23@126.7mph 1/8mi , 9.44@150.99mph 1/4mi 60" Arm, 1361cc, manual shifting.
http://www.kiruna.se/~mgrape
|
Megabyte
Pro
Posts: 1047
|
posted May 04, 2003 08:24 PM
Edited By: Megabyte on 4 May 2003 21:25
Thanks Catman, 201.8 hp before mapping, not bad, but only a 20 hp gain, I've got to think about that... 
____________
We First make our habits and then our habits make us.
|
catman12
Expert Class
Posts: 169
|
posted May 04, 2003 10:17 PM
Yes a 20hp gain, but the head was done before installing the 1361 kit, I had 175hp with just pipe and standard bore. I would prefere higher compression with that kit!!!
/ Mikael from Sweden
www.kiruna.se/~mgrape
It´s in swedish but hover on the buttons to have english, explanation.
____________
6.23@126.7mph 1/8mi , 9.44@150.99mph 1/4mi 60" Arm, 1361cc, manual shifting.
http://www.kiruna.se/~mgrape
|
kcadby
Pro
Posts: 1733
|
posted May 06, 2003 09:33 AM
If built/tunned right...you should get about 210HP...
The thing you REALLY need to know is...you can expect about 118lb torq!!! with the 1361...
So it's more like 30-35hp and 20-25 torq
|
Megabyte
Pro
Posts: 1047
|
posted May 06, 2003 01:16 PM
Still under 1000 miles so I'm being anal with the throttle. However, I've spun the wheel and clutch already even with staying under 6k rpms. I don't know what kind of HP she's putting out, but the good news is, she's putting out, if you know what I mean
quote:
If built/tunned right...you should get about 210HP...
The thing you REALLY need to know is...you can expect about 118lb torq!!! with the 1361...
So it's more like 30-35hp and 20-25 torq
____________
We First make our habits and then our habits make us.
|
|
|
HOME
NEW TOPIC