vozizm

Needs a job
Got Nothing Witty To Say
Posts: 4417
|
posted November 22, 2002 05:49 AM
suspension...
if i change setting on the following what will it do for me.....
front fork..
rebound damping?
compression damping?
spring preload?
i have my 02 fast ass PMB lowered 1/34 inches at forks and muzzy links in middle hole.... front end i kinda bouncy want to tighten it up some....just need to know what each is for .... and please...please but it in DAFU terms...ohh for those who dont know
Dum
Ass
Fuck
Up
that be me!!!
____________
VOZ
|
VincentHill

Needs a life
Posts: 6520
|
posted November 22, 2002 07:48 AM
1 3/4" on the Forks?? The 02 Forks MUST Be Different! The 00 and 01 Forks are a Problem at over 1.5"! Ad spring in front until 2 lines are showing! Bounce the bike up and down! It should almost come up as fast as it goes down! I use very little Compression Dampening except for lowering my Bike!
____________
Made History @ Daytona and still one fast old man!!
|
vozizm

Needs a job
Got Nothing Witty To Say
Posts: 4417
|
posted November 22, 2002 08:00 AM
gracias papi!!!
____________
VOZ
|
VincentHill

Needs a life
Posts: 6520
|
posted November 22, 2002 10:12 AM
quote: gracias papi!!!
Being "Old" Makes me more cautious! I have special Stainless Hose clamps (Thicker and narrower than the Auto Zone types) that I have Under the top and lower clamp to make sure that if I have a hard landing, that I also have an insurance Policy!
|
VincentHill

Needs a life
Posts: 6520
|
posted November 22, 2002 10:17 AM
I saw some Pictures Somewhere of some "Things" you had put on your Bike! I also saw the "Bolt" in question! I could see that it was sitting up about 1/8" to 3/16"! I would put 2 layers of Duct Tape all around that stub and take a Hack Saw and Saw a SLot right through the center of the bolt! Spray a little Oil and take a screwdriver! Put it in the slot, Tap it once and unscrew it! Let me Know!!
|
vozizm

Needs a job
Got Nothing Witty To Say
Posts: 4417
|
posted November 22, 2002 11:09 AM
kewl...this weekend...did ya get my PM?
____________
VOZ
|
VincentHill

Needs a life
Posts: 6520
|
posted November 22, 2002 12:35 PM
I got your message and responded so you will know exactly what to do! Call me if you have any problems!!
____________
Made History @ Daytona and still one fast old man!!
|
|
|