HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: PCIIIR NEW TOPIC NEW POLL POST REPLY
vmaxwayne


Expert Class
Posts: 228
posted October 25, 2002 11:19 AM        
PCIIIR

I'm considering buying an EMS and am starting the search. I'm looking at the Yoshimura, Muzzy and the Dyna.

The Yosh is more expensive as is the Muzzy but the Dyna seems to have nothing but problems.

Recently someone posted a long story about their problems but seems Dyna finally figured out what was wrong and fixed the problem.

Any advice would be appreciated.

  Ignore this member   
ZHooligan


Moderator
Post Whore Extraordinaire!
Posts: 3829
posted October 25, 2002 01:19 PM        
When Powercommander actually fixes one of mine and admits that something was actually wrong I'll beleive it! Of the three choices it looks to me that the Yosh is the way to go. I have zero experience with one. Have just ordered one. BUt I know of the Powercommander issues both as a customer and a retailer. The Muzzy EMS is a long technical deal and is significantly more expensive when you are through buying the add ons and other things like new coils, wires etc.

I have not seen any of the Yosh guys posting bad things about their box either.
____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.

  Ignore this member   
kcadby


Pro
Posts: 1733
posted October 26, 2002 09:34 AM        
quote:
The Yosh is more expensive as is the Muzzy but the Dyna seems to have nothing but problems.


That's just not true...
I've installed SEVERAL of them since I started working at SM2W and haven't had any problems yet...
We DID get "one" (on a Hardly) that got Goofy TP#s...Sent it in and got a replacment...no big deal...
I LOVE the fact that it (PC3) can be mapped with the tunning link (we have one here)...

"WE" (SM2W) back what we sell...if we sell a PC that doesn't work right "WE take care of it"

  Ignore this member    Click here to visit kcadby's homepage. 
ZHooligan


Moderator
Post Whore Extraordinaire!
Posts: 3829
posted October 26, 2002 12:55 PM        
The taking care of it doesn't take care of the down time. I stick with my statement about the problems with the PCs. This board as well as others have had a significant number of guys listing their problems with the PCs and I can't recall a complaint on the Yosh EMS.

And beleive me as a Dyno Jet Facility Owner and Operator, with Tuning Link, I love the Power Commander when it works. But it doesn't change the fact that PCIIIr specifically has far to many failures.
____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.

  Ignore this member   
mach111


Novice Class
Posts: 81
posted October 26, 2002 04:32 PM        
heres another real world, p.c complaint.bought a p.c111.the old style where the ground wire was in the wiring harness.6 weeks it took a shit.the tech said starcycle sold me a very old unit and i should,since it took a dump,replace it with a newer one that has a ground built in.i did that.the one that was bad worked fine until it went bad,no starting problems at all.well i got the new p.c111 with a external ground wire needing connecting at the battery.
put it on warmed up the bike and pow!as soon as i tryed restarting the bike,it would not turn the starter over!not only that when i went to check the map,that they were suppose to just copy from the broke one i had custom made and sent in to them for this exchange,the map was not there,nada,f....n morons.4th p.c in 3 months and i'm pissed,how can i be in a riding group,and say:sorry guys my p.c is not wanting to crank were gonna have to wait a while to cool down so it will crank..not..i thought it was the 3r doing this,so we swapped it.now i can say i think it might be a ground issue of some sort.all i can say is i'm tired of u.p.s costs and d.j's bullshit.hell i have almost enough invested in time and shipping to buy a yosh.take it from real world:if your one of those lucky few that have not had problems thats great.so either buy the yosh,or roll the dice on d.j.

  Ignore this member   
Red 12R Rocket


Novice Class
Posts: 59
posted October 26, 2002 06:07 PM        
I was perfectly happy with my PCIIIr for over a year. Thought it was the shit (the GOOD shit!!).

Then one day my bike wouldn't start. Engine cranked fine but wouldn't fire. Traced the problem to the PCIIIr, removed it from my 12R and all was fine. Bike runs HARD without it!! I was just lucky that I was at home when the PCIIIr failed - would have sucked to have been miles away from home (like has happened to MANY others).

The PCIIIr has a HORRIBLE track record with guys on these 12R boards. And remember, just because somebody has one that is working doesn't mean it is always going to work!!

  Ignore this member   
zx12richard


Pro
The Green Monster..
Posts: 1133
posted October 26, 2002 06:33 PM        
I made the mistake of saying mine works great.... Now I have had a second failure in less than a year... Calling DJ monday...
  Ignore this member   
Megabyte


Pro
Posts: 1047
posted October 26, 2002 11:44 PM        
I know nobody wants to hear this, but 2 years ago, I installed a pciiir, and after 12K miles, with the exception of getting my PC to "find it", have yet to have a problem.

quote:
I made the mistake of saying mine works great.... Now I have had a second failure in less than a year... Calling DJ monday...

____________
We First make our habits and then our habits make us.

  Ignore this member   
vozizm


Needs a job
Got Nothing Witty To Say
Posts: 4417
posted October 27, 2002 05:44 AM        Edited By: vozizm on 27 Oct 2002 05:45
http://www.zx-12r.org/phpBB2/viewtopic.php?t=10504&start=0&postdays=0&postorder=asc&highlight=


check it out....
____________
VOZ

  Ignore this member   
ZHooligan


Moderator
Post Whore Extraordinaire!
Posts: 3829
posted October 27, 2002 09:01 AM        
Megabyte... I know there are units that have had zero problems. That has always provided hope at least! Swft and i were talking last night about the fact that the Powercommander on his red now black 12 was probably one of the first dozen sold. It has had zero problems. That doesn't change the facts about others failing!
____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.

  Ignore this member   
Megabyte


Pro
Posts: 1047
posted October 27, 2002 12:47 PM        
Good theory! I believe mine was one of the first made too because I paid for it several months before they were even available.

Swft and i were talking last night about the fact that the Powercommander on his red now black 12 was probably one of the first dozen sold. It has had zero problems. That doesn't change the facts about others failing!
____________
We First make our habits and then our habits make us.

  Ignore this member   
vmaxwayne


Expert Class
Posts: 228
posted October 27, 2002 01:46 PM        
Guys:

Thanks for all the comments. I conclude that lots have the PCIII but few are happy.

I'm going to Yosh.

Anybody have the Yosh?

How has it performed, problems, etc.??

  Ignore this member   
02zx12rbob


Expert Class
Posts: 496
posted October 27, 2002 03:08 PM        
I have the YOSH EMS, I have not mapped it yet, gonna get the acc. hub..then put some maps together. Got an AKRA pipe with BMC filters and a small blue bottle under the seat But so far no problems.
  Ignore this member   
mach111


Novice Class
Posts: 81
posted October 27, 2002 05:24 PM        
i third this with the "older" p.c's having no problems.as i said above,starcycle sold me a unit that had the ground wire in the harness,not aving to put a wire to battery is how you can tell the older units.i had no problems with that very first one either.seems d.j should go back and do whatever they did to make the 1st batches.i'm gonna try and get mine back.i would love to find out what is causing these starting problems.
3 month's with a "older" unit on my 01 and no start problems(again ground was built in harness under under tank).swapped it for a newer one with ground external going to battery,d.j said i would have absolutly no problems,1st day. bike starter cuts out while turning over.has anyone tried grounding to frame instead of battery?i just cant see how 2 p.c's are so different,that are the the same except one grounds to battery and dosnt crank,and one grounds to harness and cranks fine.?

  Ignore this member   
zxrcy


Novice Class
Posts: 62
posted October 27, 2002 06:48 PM        Edited By: zxrcy on 27 Oct 2002 18:53
PC3R

I have it grounded to the plate on the underside of the tank and I have the occasional starter cut-out problem so I don't think it is a grounding problem. It happens whether the bike is hot or cold. Other than this I have not had any problems with the unit. It connects every time with my laptop. I have the PC Unit wrapped in foam rubber inside the right rear seat fairing.

  Ignore this member   
kawachan


Pro
Posts: 1031
posted October 27, 2002 07:14 PM        
I have a Yosh!! No problems even though the guy who mapped it said it "looks like a DynotJet to me" The best thing I saw about it was that I can install the accessiry kit, especially the three-way map switch. Well.....that and no problems!!
____________
RED NINJAS RULE!!

  Ignore this member   
mach111


Novice Class
Posts: 81
posted October 27, 2002 07:24 PM        
The only other thing i changed when i got the "newer"p.c111 was the throttle position.i think the "average" setting is 55 closed,255 open,
when i checked at these settings i was at 1% closed and 103%open.
so i fixed the tps to 57 closed and i think 257 open.this put the closed right at 0% and open at 100%.somewhere in the past i heard of someone fixing his issue of starting problems with adj.the tps.d.j told me for some reason to keep the average setting of 55 and 255 for some reason,but maybe he was f.o.s.i guess i can rule out ground if you have it grounded somewhere else than the battery.i'm gonna try anyway for a frame ground and put the tps back to average.if no luck i'm gonna get my older p.c111 back that starts fine.i talked to one of the supervisors at d.j and he said that he was unaware of these problems and it was my bike.b.s.. i have a friend who also has a 01 and he swapped his 111r for a 111 and has the same exact starter cut out problems as me.the supervisor said if i can prove other people are having this problem he would look into this issue deeper.
i wonder if all you fella's with this problem would be willing to help me sign a petition,and i willl send it in to him.i'm going to make a post here and try and get as many people to sign it.than email it to him.i'm also going to make a post on easy's site,to get some more signatures if i can.

  Ignore this member   
doctor71


Parking Attendant
Posts: 1
posted October 06, 2004 02:11 AM        
I also had a newer style PCIIIr for my 2001 zx12. Installed it in 2002. It worked for 400 miles and by the grace of god it Shit The Bed about 600 feet from the house. Disconnected it and the bike worked flawlessy. I tour up to Canada 13 hour trips to the middle of nowhere and the last thing I need is to have that PC f-up on me. I don't trust it. I was planning on sending it back last spring but have never got around to it, pretty much chalked it up as a loss by now. Mine has the messed up TPS numbers when I try to program it. I have just given up on the thing just due to a reliability issue. I tried several different maps, Zero, stock, Muzzy bolt-on, custom maps from Easyrider, trying to smooth the off idle response by cliff R, and Honestly my seat of the pants dyno felt the bike ran better in the stock form. And after reading all the others with issues, PC is not gonna get my business due to a falty product. I'm sure they have great customer service but that doesn't help when your 500 miles from home. sorry I have better things to do with my 400+$.

The only mods to my bike is the kitty is dead and I run a Ti muzzy bolt-on, oh and is geared.

  Ignore this member   
fish_antlers


Administrator
The Truth is Out There
Posts: 21896
posted October 06, 2004 07:00 AM        
quote:
custom maps from Easyrider, trying to smooth the off idle response by cliff R


Welcome home.. those maps and all that info came from this website, not "Easyrider"
____________
What business is it of yours where I'm from, Friendo?


  Ignore this member    Click here to visit fish_antlers's homepage. 
EastBayDave


Needs a job
Posts: 2245
posted October 06, 2004 04:10 PM        
...exactly why I never got one....too many failures...

It's too bad the Muzzys product is so expensive. Out of reach for the average joe...

The Yosh is barely more $$$ than the DynoJunk....guess that's the way I will eventually go. I like the 3-way switch idea too...3 maps at the flick of a switch...cool!
____________
Enjoy the ride!
02' ZRX1200
00' ZX12R sold

  Ignore this member   
fish_antlers


Administrator
The Truth is Out There
Posts: 21896
posted October 06, 2004 04:55 PM        
Dave.. you are sadly mistaken about DJ... first of all the "failures" are not a failure of the unit, but caused by the cable being incorrectly routed by the user...

next.. the Yosh unit is a photocopy of the DJ unit, and is designed and manufactured by DJ.



____________
What business is it of yours where I'm from, Friendo?


  Ignore this member    Click here to visit fish_antlers's homepage. 
bossman12r


Zone Head
Posts: 513
posted October 07, 2004 05:39 PM        
Well I had a pc3 that worked great, but needed to -timing for NOS I just installed a pc3r with the exturnal ground wire and the bike will not turn over fast enough when it is hot to start.
____________
gen 4 zx10 is fast

  Ignore this member   
Megabyte


Pro
Posts: 1047
posted October 07, 2004 05:46 PM        
Try setting your timing to -3 from 0 to 1000 RPMs

quote:
Well I had a pc3 that worked great, but needed to -timing for NOS I just installed a pc3r with the exturnal ground wire and the bike will not turn over fast enough when it is hot to start.

____________
We First make our habits and then our habits make us.

  Ignore this member   
bossman12r


Zone Head
Posts: 513
posted October 08, 2004 06:02 AM        
I was thinking about that. It starts like it is +9 advanced but it is at 0.
____________
gen 4 zx10 is fast

  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: PCIIIR NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.32647299766541 seconds processing time