posted September 20, 2002 06:58 AM
Wiinter Mod's.... Well I hopes of getting something I have always wanted, I'm busting out the walet...
1) Marchesini 5 spoke.
2) Penske rear shock.
3) Muzzy 1270.
4) Ported head.
5) Bear Stacks.
6) Hindle Pro-Step.
7) 4 and 6 Racing Custom map.
Why? Maxon, I have aleays wanted to be in the 200 mph this should do it.
Bart
posted September 20, 2002 07:05 AM
Kickass brother! I want to take that puppy for ride in May, at least so it can see redline and all.
____________
It's a free country brother
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted September 20, 2002 09:32 AM
I'm kinda ambivalent towards headwork. Think of it this way:
You can purchase the crankcases, crankshaft, cylinder, pistons and connecting rods for a zx12r, and still not equal the price of a BARE head, that is, a head without valves, springs, valve guides, collets, water jacket plugs, etc...
____________
82 Gpz750, 84 Ninja 900, 2000 ZX12R (Muzzy Big Bore Kit), *another* 2000 ZX12R (Muzzy custom stroke crank 1341cc motor), 2004 ZZR1200, 2005 ZX10R, 2007 ZX14, 2008 Concours 14, 2014 Versys 650, 2014 Yamaha WR450F, 2015 Ninja H2
posted September 20, 2002 06:34 PM
winter mods 1)Chrome rims
2)extend the bike 4 inches(JMC engineering)
3)change front & rear sprockets
4)Steel braided brake lines
5)Undertail kit(Graphic motodesigns)
and if i have enuff left over ill most likely be putting
a turbo on the bike
Moderator
Please... speak to the hand.
Posts: 3212
posted September 20, 2002 07:09 PM
Edited By: redelk on 20 Sep 2002 20:10
GOZR, what kind of expense are we talking about here? Who's doing it for you? Since the 10R is still a long ways off, I could seriously consider this mod. That is if I don't have the sell my kids into (back into, that is) slavery.
____________
There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.
-Ernest Hemingway
posted September 20, 2002 09:30 PM
My winter mods will be a few more tid bits of Titanium, Dino's trunk mod and hopefully the front turn signals!! Hint hint!!!
Also I will either buck up for the MUZZY EMS or at lest but the Yosh EMS on so I can easily change between my NOS map and non NOS map.
Search for a carbon subframe
Probably do the ZX7R swing arm if it works.
____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted September 21, 2002 04:57 AM
I'm going to powdercoat my 7R swingarm black, before putting it on. That way it will match the current paint on the bike. Dino - Mike Velasco has a s/s swingarm for a CBR900 (I think) being the adaptive soul that you are, maybe you could make it work on your 12. M'self, I just want a *shorter* swingarm.
Moderator
Please... speak to the hand.
Posts: 3212
posted September 21, 2002 07:38 AM
Oooo! I'm not lookin' for a ss swingarm! I remember when I had a 7R and they came out with it. it was about $5K! At that price, I could get a COMPLETE late model 7R!
That's one reason why I'm interested. The P series has been around for so long, I'm figuring I can score a standard 7R swingarm for just this side of "dirt" (cheap). Hell, my dealer might even have one or two of them in his "boneyard". Can you say, "you pull it and it's your's"? I knew you could.
What I'm curious about is if any mods are need for shock attachment or anything like that? Do you need different bearings, "dog bones", etc. or does it basically a "swap job"?
Like swft, I just want a shorter swingarm. I ain't even thinkin' about repainting, powdercoating it or anything. I just wanna slap that baby on there!
____________
There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.
-Ernest Hemingway
posted September 21, 2002 08:35 AM
RedRlek the only problem i see with the 7R swing is the attachement of the rear caliper , so i'll have to weld a small part like on the zx12 swingarm to be able to hold the zx12 caliper.
The rest seamce ok
I'll post some pics to discribe it
posted September 21, 2002 08:45 AM
GOZR,are the dimensions at the pivot point close? I wouldn't have to worry about the caliper slide "cuz the RAM ssswingarm comes w/ brembo set-up and it's all on the left side. They have these available for the 7....Muzzy used them on their RAPTORS.......ME WANT BAD!!
____________
uh oh
posted September 21, 2002 08:45 AM
GOZR,are the dimensions at the pivot point close? I wouldn't have to worry about the caliper slide "cuz the RAM ssswingarm comes w/ brembo set-up and it's all on the left side. They have these available for the 7....Muzzy used them on their RAPTORS.......ME WANT BAD!!
____________
uh oh
posted September 21, 2002 08:45 AM
GOZR,are the dimensions at the pivot point close? I wouldn't have to worry about the caliper slide "cuz the RAM ssswingarm comes w/ brembo set-up and it's all on the left side. They have these available for the 7....Muzzy used them on their RAPTORS.......ME WANT BAD!!
____________
uh oh
All times are America/Va [ This thread is 2 pages long: 12Next» ]
HOME
NEW TOPIC
posted September 20, 2002 06:58 AM
My winter mod is gonna be fitting the ZX7R swingarm!
posted September 20, 2002 06:34 PM
Edited By: 
