HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: timing for ignition table NEW TOPIC NEW POLL POST REPLY
johnnnyboy


Expert Class
08 Concours 14
Posts: 164
posted February 14, 2009 06:00 PM        
timing for ignition table

is 5 deg to much advance at WOT ?

also at 100% throttle can I start off at 3 and end up with 5 at 11500 rpm ?

Ive got a 2000 KN's stepped tube hindle pc3r

  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7235
posted February 14, 2009 08:20 PM        
depends on engine setup, octane ect
run 91 or better and try 4 degrees, should be fairly safe on a stock setup
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos

  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: timing for ignition table NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.21684694290161 seconds processing time