twista
Zone Head
" Get up, and Stay up ! "
Posts: 797
|
posted December 19, 2007 07:26 PM
JUST INSTALLED..
BMC Race filters and my question is>> are they supposed to go in like a cassette,, these went in no problem,, versus the stockers i pulled out with channel locks,, im wondering if im getting a good enough seal? once sinched down with the 4 boths i know its sealed up top but what about everywhere else?
also there was a yellow line on one side of the element,, i faced that towards the front of the bike,, hope that was correct..
____________
" When in Doubt, There is no Doubt !"
  
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted December 19, 2007 08:14 PM
you can seal them with thick grease around the rubber edge if you arent sure. i think the yellow line goes towards the front, but im not sure, i have K&Ns in my bike (came that way) Im going to try out the BMC race filters to see if they make a diff later on....
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
|
|
|
|
HOME
NEW TOPIC