HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: home drilled clutch hub? NEW TOPIC NEW POLL POST REPLY
VincentHill


Needs a life
Posts: 6520
posted July 16, 2007 07:24 AM        
quote:
Sounds solid!

Grind the crap out of your pusher. Does this method allow you to meter the amount of oil getting into your hub?!?


What I did was use a 1/4 wide bevel and flat side and then after a run when I pulled off the cover and saw that there was "Some" Oil on everything but not Filled with Oil I left it there! I barely saw Oil with the Muzzy alone so I added a little more for cooling!
____________
Made History @ Daytona and still one fast old man!!

  Ignore this member   
psycho1122


Pro
Posts: 1608
posted July 16, 2007 07:58 PM        
I also run the Muzzy hub set up with my cross drilled pusher mod.

Not too much / not too dry.
____________
You say PSYCHO like it's a BAD thing!!

  Ignore this member   
VincentHill


Needs a life
Posts: 6520
posted July 17, 2007 05:20 AM        
quote:
I also run the Muzzy hub set up with my cross drilled pusher mod.

Not too much / not too dry.


Exactly as it should be!

My next set up has a special pushed made by Bear with a lot of Bearings and so I can pull in the clutch while locked up and not do ANY Damage! I cannot show a picture.

  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7235
posted July 17, 2007 08:02 AM        
haha top secret parts eh VH
I think i may try the cross drill method if my clutch plates look dry after running it again.....
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos

  Ignore this member   
thekaz


Needs a job
spell chequer is bustimicated
Posts: 2909
posted July 17, 2007 08:29 AM        
I do not like this thread due the complete lack of pictures
  Ignore this member   
VincentHill


Needs a life
Posts: 6520
posted July 17, 2007 09:22 AM        
quote:
haha top secret parts eh VH
I think i may try the cross drill method if my clutch plates look dry after running it again.....


Agreed!
____________
Made History @ Daytona and still one fast old man!!

  Ignore this member   
CJ


Novice Class
Posts: 53
posted June 11, 2009 05:13 PM        
Can anyone tell me where to drill the hub , what size holes and how many?
____________
07 plasma blue zx14
Ain't no fun when the rabbits got the gun

  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7235
posted June 12, 2009 09:27 AM        
i did a little write up here (learned a bit since 07)
http://kawasakiworld.com/racing/37186-not-enough-oil-clutch-pack-how-fix.html
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos

  Ignore this member   
All times are America/Va [ This thread is 2 pages long: 1  2   ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: home drilled clutch hub? NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.33691787719727 seconds processing time