VincentHill
Needs a life
Posts: 6520
|
posted January 02, 2007 07:59 PM
I bought a set for the Later Model but did not know they fit! Your Bike is a 1999 or 2000 1100??
I know the 1200 had them but not the 1100
  
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted January 03, 2007 12:57 PM
Any reason for switching waste gates?
____________
TFA 200MPH CLUB MEMBER!
|
oldkawboy
Needs a job
Posts: 2125
|
posted January 03, 2007 06:45 PM
Mines a 2000 model Vincent.
I never was pleased with the way the actuator rod was routed for the internal waste gate........and this one is adjustable for more boooooost!
I'm gonna find out how much a stock bottom end can handle :-)
Dan
|
Phantom Menace
Expert Class
Posts: 169
|
posted January 05, 2007 01:26 PM
 Edited By: Phantom Menace on 5 Jan 2007 13:26
Having my motor done by ACE PERFORMANCE..
1287cc JE Pistons @ 13.3:1 CR
Megacycle Intake cam
3 angle Valve job
Head Porting
Balanced rods, pistons, crank (by Falicon)
Undercut Transmission w/ upgraded shiftforks and heavy duty C-clip
12,300 rpm extension
Short velocity stacks
Akra Evo exhaust
Looking to make 196-200rwhp SAE Naturally Aspirated and 235-240rwhp on Nitrous.
Ton of other mods done to the actual bike in terms of weight, ram air, wheels, aerodynamics, etc...
Should be finished (hopefully) by the end of this month..... we'll see how it does in the 9/10th's and Maxton this year.
|
entropy
Moderator
Posts: 8671
|
posted January 05, 2007 03:27 PM
phantom;
have you had yr ECU mod done yet? If not, send it to DaveO; really FAST turnaround!
____________
This moderator uses moderation in moderation
|
stef12rr
Expert Class
Posts: 144
|
posted January 06, 2007 01:52 PM
Phantom Menace I am doing the same thing 1287cc lighter and balance crank , balancer out
Can you ACE the is gonna be the weight of your crank for
thank
|
oldkawboy
Needs a job
Posts: 2125
|
posted January 06, 2007 08:11 PM
Huh???
|
magzx12r
Expert Class
Posts: 252
|
posted January 07, 2007 11:24 AM
quote:
phantom;
have you had yr ECU mod done yet? If not, send it to DaveO; really FAST turnaround!
Karl, what is the ECU mod? Does it work for the ecu on the '04/'05 ZX-12R's?
____________
Mark
'03 ZX-12R
'12 1199S
|
Outsiderzx12r
Zone Head
Street Racer
Posts: 841
|
posted January 07, 2007 12:30 PM
WInter plans for me: 2nd gear replacement....
____________
OutsiderZX12R
2000 ZX12R-A1
|
entropy
Moderator
Posts: 8671
|
posted January 07, 2007 01:33 PM
quote:
quote:
phantom;
have you had yr ECU mod done yet? If not, send it to DaveO; really FAST turnaround!
Karl, what is the ECU mod? Does it work for the ecu on the '04/'05 ZX-12R's?
DaveO's ECU mod increases the rev limiter by 5%, i.e. 11.6 to 12.2.
I've had it done as have many many other 12 and Busa owners. My reason is for protection against going into the limiter.
don't know if it works for 04/05 12's; you should prolly give Dave a call.
____________
This moderator uses moderation in moderation
|
Phantom Menace
Expert Class
Posts: 169
|
posted January 07, 2007 01:58 PM
Edited By: Phantom Menace on 7 Jan 2007 13:59
Entropy- Yes, already had Dave do the ECU mod, went with Carpenter HD valve springs to handle the bigger cam and extra RPM.
stef12rr- I'm not exactly sure what you're trying to say, perhaps something was lost in translation? Anyway, I had my crank just BALANCED, not lightend. Make sure when you send Falicon the crank, you have the flywheel on there too, it also needs to be balanced with the crank. I chose to keep the stock weight of the B model crank (approx. 3 pounds heavier than the A model crank) simply for the smoother spool up and less engine braking that could upset the chassis when chopping the throttle at over 200mph. What many people forget is that engine characteristics is almost as important as engine output.
I'm also keeping the counterbalancer in the bike... I'd rather have a perfectly smooth motor than the extra 3rwhp and all that vibration, my bike is very much a daily driver.
|
Phantom Menace
Expert Class
Posts: 169
|
posted January 07, 2007 02:03 PM
magzx12r- The 00-03 ECU's are 16-bit.... the 04-05's are 32-bit ecu's. If the 32-bit ECU on the ZX-12R is anything like the Busa's 32-bit ECU (later model busa's)... the RPM's can not be increased as much.
|
02zx12rbob
Expert Class
Posts: 496
|
posted January 07, 2007 02:13 PM
Karl...yours done ?
|
entropy
Moderator
Posts: 8671
|
posted January 07, 2007 03:50 PM
quote:
Karl...yours done ?
it will be soon; as i'll have all the parts early this week
(thx to Y2K!)
____________
This moderator uses moderation in moderation
|
|
|
HOME
NEW TOPIC