Cowboy
Pro
Posts: 1061
|
posted March 23, 2002 09:08 PM
K&N pc3r?
How do you tell the difference between the 3 and the 3r?
  
|
Charles
Novice Class
Posts: 81
|
posted March 23, 2002 09:13 PM
The part numbers should be different.
____________
Thanks,
Charles
info@streetntrackimport.com
|
Cowboy
Pro
Posts: 1061
|
posted March 23, 2002 09:18 PM
could you tell me the different part#s please?
|
eric00zx12r
Novice Class
Posts: 97
|
posted March 23, 2002 10:52 PM
the 3r is 83204-311. I think the 3 is -211
____________
Eric
00ZX-12R
Candy Persimmon Red
|
H
Parking Attendant
Posts: 26
|
posted March 24, 2002 04:13 AM
 Edited By: H on 24 Mar 2002 04:14
PC3R
The DynoJet Site lists the "211" for both the 3 and 3R. for the ZX12. Most of the other models have "211" for the 3 and "311" for the 3R.
|
Cowboy
Pro
Posts: 1061
|
posted March 24, 2002 09:26 AM
The power commander i recieved only has the one large connector(split into two)and the main power you connect to the rear tail light connecter.On the gsxr 1000 i did it came with one more connecter for the timing.I the timing for the 12 all built into the large connecter??
|
Charles
Novice Class
Posts: 81
|
posted March 24, 2002 09:55 AM
418-204211 PC3
418-204311 PC3R
These are the K&N power commanders.
____________
Thanks,
Charles
info@streetntrackimport.com
|
Cowboy
Pro
Posts: 1061
|
posted March 24, 2002 01:51 PM
Thanks Charles,next problem is there are no part #s on the power commander itself
|
Tearinitup
Expert Class
VP Code Monkey
Posts: 298
|
posted March 25, 2002 08:31 AM
The PCIII and the PCIIIr both have similar connectors. Thare have been several discussions on this topic and a k&n power commander is exactly like a dynojet power commander.
|
fast
Novice Class
Posts: 40
|
posted March 25, 2002 08:54 AM
Hey cowboy !if you want to test if its really
a r put a map with a lot of retard timing so it
wont hurt the engine and see if the motor run the
same ,it should cut some pep less agressive!
____________
9.29@151
|
Cowboy
Pro
Posts: 1061
|
posted March 25, 2002 04:47 PM
Thanks guys,i feal a bit better.I don't even have it on the bike yet but i'll hook power up to it and see if it will take timing in the next couple days.
|
|
|
HOME
NEW TOPIC