blitzkrieg
Needs a job
Road kill = Free lunch.
Posts: 2044
|
posted February 07, 2006 05:59 PM
Interesting.
I gave them a call and they said if a bikes not listed its because they don't offer a complete kit for it.
The zx-12r shims range from 2.00 mm - 3.00 while the zx-9 shims range between 2.50 mm and 3.50 mm. My guess is the zx-9r has a weird range not shared by many bikes thus no kit offered.
I did a little digging on kawasaki.com and from a part # comparison I think the 9 uses 9.48 mm shims but I am not 100% sure because a couple of the 92180 prefix numbers are shared but the shim thickness' are slightly different and the part# suffix numbers are slightly different.
I wouldn't bet my left one they are 9.48 mm like the zx-12 but I would bet $20. Unfortunately I've never torn into a 9, only zx-11's and zx-12's so I can't tell you for sure. I bet a dealer could.
2000 zx-9r
Ref # Part # Description Qty Spec Code
92180 92180-1014 SHIM,T=2.50 16
92180A 92180-1016 SHIM,T=2.55 AR
92180B 92180-1018 SHIM,T=2.60 AR
92180C 92180-1020 SHIM,T=2.65 AR
92180D 92180-1022 SHIM,T=2.70 AR
92180E 92180-1024 SHIM,T=2.75 AR
92180F 92180-1026 SHIM,T=2.80 AR
92180G 92180-1028 SHIM,T=2.85 AR
92180H 92180-1030 SHIM,T=2.90 AR
92180I 92180-1032 SHIM,T=2.95 AR
92180J 92180-1034 SHIM,T=3.00 AR
92180K 92180-1036 SHIM,T=3.05 AR
92180L 92180-1038 SHIM,T=3.10 AR
92180M 92180-1040 SHIM,T=3.15 AR
92180N 92180-1042 SHIM,T=3.20 AR
92180O 92180-1044 SHIM,T=3.25 AR
92180P 92180-1046 SHIM,T=3.30 AR
92180Q 92180-1048 SHIM,T=3.35 AR
92180R 92180-1050 SHIM,T=3.40 AR
92180S 92180-1052 SHIM,T=3.45 AR
92180T 92180-1054 SHIM,T=3.50 AR
2000 zx-12r
Ref # Part # Description Qty Spec Code
92025 92025-1870 SHIM,T=2.00 16
92025A 92025-1871 SHIM,T=2.05 AR
92025B 92025-1872 SHIM,T=2.10 AR
92025C 92025-1873 SHIM,T=2.15 AR
92025D 92025-1874 SHIM,T=2.20 AR
92025E 92025-1875 SHIM,T=2.25 AR
92025F 92025-1876 SHIM,T=2.30 AR
92025G 92025-1877 SHIM,T=2.35 AR
92025H 92025-1878 SHIM,T=2.40 AR
92025I 92025-1879 SHIM,T=2.45 AR
92025J 92025-1880 SHIM,T=2.50 AR
92025K 92025-1881 SHIM,T=2.55 AR
92025L 92025-1882 SHIM,T=2.60 AR
92025M 92025-1883 SHIM,T=2.65 AR
92025N 92025-1884 SHIM,T=2.70 AR
92025O 92025-1885 SHIM,T=2.75 AR
92025P 92025-1886 SHIM,T=2.80 AR
92025Q 92025-1887 SHIM,T=2.85 AR
92025R 92025-1888 SHIM,T=2.90 AR
92025S 92025-1889 SHIM,T=2.95 AR
92025T 92025-1890 SHIM,T=3.00 AR
92025U 92025-1982 SHIM,T=2.425 AR
92025V 92025-1983 SHIM,T=2.475 AR
92025W 92025-1984 SHIM,T=2.525 AR
  
|
blitzkrieg
Needs a job
Road kill = Free lunch.
Posts: 2044
|
posted February 07, 2006 06:11 PM
quote:
blitz I can help you out... if you need! PM me...
Mike
I'm gonna be in contact at some point Mike. I need to refresh my 9.48 mm supplies for certain sizes before I do another shim job on a 12.
I'll certainly be giving you a shout when its time for the 7.48 mm's for the R1, but that will be some time as I don't rack up the miles like some do (the mountains are close, I don't commute on my bikes, winter, etc..  )
|
claude
Expert Class
Posts: 205
|
posted February 07, 2006 06:16 PM
In case it could help, Hotcams (link below) sell many shim kits. Most seem to be 7.48 mm and 9.48 mm diameter though.
http://www.hotcamsinc.com/catalog.asp
|
ninja
Novice Class
Posts: 81
|
posted February 07, 2006 06:53 PM
Thanks Blitz
|
blitzkrieg
Needs a job
Road kill = Free lunch.
Posts: 2044
|
posted February 07, 2006 08:19 PM
quote:
In case it could help, Hotcams (link below) sell many shim kits. Most seem to be 7.48 mm and 9.48 mm diameter though.
http://www.hotcamsinc.com/catalog.asp
Thanks Claude.
Cyclebuy is actually a reseller for HotCams.
http://www.cyclebuy.com/shopping/shims/shimkits.htm
|
|
|
|
|
HOME
NEW TOPIC