HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: Sadomasochism and Scotts Damper Installation NEW TOPIC NEW POLL POST REPLY
scooter trash


Expert Class
Posts: 407
posted August 21, 2005 07:29 PM        
Sadomasochism and Scotts Damper Installation

Okay, so I mounted my new Scotts damper on my A1 today.

If you've never mounted one of these here is the drill:

The mounting bracket for the pivot mounts on the air box right next to the steering stem in front of the gas tank.

So...... What you do is drill holes in the airbox and then you remove the left airbox plate and filter. Then, you get to stick your arm through the inspection hole and put the nuts on the mounting bolts waaaaaay up in the front of the airbox.

This whole operation is akin to pulling a watermelon through your nose while balancing an egg on top of your head.

I love Scotts products, but man their R&D guy must be a pygmy or something. I am confident I will regain feeling and the red marks will disappear from my arm over the next couple of weeks though.

  Ignore this member   
gunner


Needs a life
Posts: 5778
posted August 21, 2005 07:38 PM        
Bob the A1 I just purchased already has a Scotts, and your personal fav an Akro! Man it's a sweet ride. I'm in the process of taking all her cloths off for a complete phyical and perfect cleaning. The only thing better than 1 A model 12 is 2 of them
  Ignore this member   
scooter trash


Expert Class
Posts: 407
posted August 21, 2005 07:51 PM        Edited By: scooter trash on 29 Aug 2005 15:36
Mines just a carcass hanging in the garage right now. Got the wheels and swingarm in the truck ready to go to the powder coaters.

I should have all the plastic ready to go to the painter next week. I'm shooting for around 09/15 for her first ride since she got fubar'ed.


  Ignore this member   
phil


Expert Class
Posts: 420
posted August 21, 2005 07:53 PM        
It's really pretty simple. For the two nuts use some long surgical forcepts or what I used long needlenose vicegrips. Then some small diameter tubing taped to a vacum to suck up the drill chips.
____________
"Look at Dad, trying to look young again."

  Ignore this member   
phil


Expert Class
Posts: 420
posted August 21, 2005 07:55 PM        
Hey Gunner, hows your bud doing with little red ?
____________
"Look at Dad, trying to look young again."

  Ignore this member   
gunner


Needs a life
Posts: 5778
posted August 21, 2005 07:58 PM        
Phil I own her now!!!!!!!!!!!!! She has a good home with me
  Ignore this member   
gunner


Needs a life
Posts: 5778
posted August 21, 2005 08:00 PM        
Phil, PM me your number and a good time to call I want to ask a few questions about OL Red.......
  Ignore this member   
gunner


Needs a life
Posts: 5778
posted August 21, 2005 08:07 PM        Edited By: gunner on 21 Aug 2005 21:08
Hey Phil I think he rode Ol Red about 25 miles and decided that she was way too much for him. He called me and ask if I wanted her and I jumped on instantly. She's about as perfect as they come. You did a great job taking care of her. I'm going to spend the next few days perfectly detailing her and getting the rear sets Powdered Black and a few more little details. She'll be as perfect as the day she way new NO! Better!!!!
  Ignore this member   
aughtsix


Expert Class
Posts: 277
posted August 22, 2005 06:36 PM        
quote:
Mines just a carcass hanging in the garage right now.


Uh, Bob, it's not hanging from a ladder, is it?

  Ignore this member   
scooter trash


Expert Class
Posts: 407
posted August 22, 2005 09:23 PM        
quote:
quote:
Mines just a carcass hanging in the garage right now.


Uh, Bob, it's not hanging from a ladder, is it?


Nope. LOL. Jack Stands and Pit Bulls bro. It would take a nuclear bomb to knock her over.

  Ignore this member   
kram


Expert Class
Posts: 404
posted August 23, 2005 02:47 AM        
Hey Blitzy. You might try hanging ol' red from a ladder in the rafters. Ooops. My bad.
____________
Not just a great barbarian, the greatest barbarian, bar none.

  Ignore this member   
Ra12r


Zone Head
Posts: 919
posted August 23, 2005 01:31 PM        
The easier install is to tap thread the holes you drilled and just screw in the bolts. I really like my Scotts.
____________
All must bow to the "Ra Supremecy"...

  Ignore this member   
scooter trash


Expert Class
Posts: 407
posted August 23, 2005 02:51 PM        
quote:
The easier install is to tap thread the holes you drilled and just screw in the bolts. I really like my Scotts.


Thats a pretty iffy tapped hole. That aluminum isn't very thick (at least IMO).

  Ignore this member   
Ra12r


Zone Head
Posts: 919
posted August 25, 2005 04:31 AM        
Worked great since 2001. The holes were drilled as close to the steering head as possible.
____________
All must bow to the "Ra Supremecy"...

  Ignore this member   
RAC4IT


Needs a job
Bergie
Posts: 3009
posted August 25, 2005 07:54 AM        
Get what you pay for, shoulda bought a Muzzys.
  Ignore this member   
matt sterbator


Pro
Hiding in the bushes
Posts: 1367
posted August 25, 2005 08:34 AM        
$650 vs $400

It's nice, but it ain't that nice, and certainly not $125 more to have the damper fixed/replaced.

  Ignore this member    Click here to visit Matt Sterbator's homepage. 
scooter trash


Expert Class
Posts: 407
posted August 25, 2005 03:23 PM        
I can't speak from a drag racing viewpoint, but in the curves and GP circuit the Scotts/Ohlins is golden standard. To be honest I have never seen a Muzzy on a GP bike.

Radial dampers rule that arena.

  Ignore this member   
aughtsix


Expert Class
Posts: 277
posted August 26, 2005 08:20 PM        
quote:
Okay, so I mounted my new Scotts damper on my A1 today.


And I forgot to ask - are you mounting a steering damper because you want one? Or because you believe the A model NEEDS one...

Just curious.

  Ignore this member   
scooter trash


Expert Class
Posts: 407
posted August 27, 2005 06:33 AM        
NEEDS. I can find better things to do with $400 if just for fashion. ;-)

Push it hard enough and you'll agree with me if you don't already.

  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: Sadomasochism and Scotts Damper Installation NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.22673916816711 seconds processing time