Farmer Rog
Novice Class
Posts: 92
|
posted January 24, 2005 07:53 AM
TPS and Tach Signal wires???
Looking for easy access to wires (pref in the trunk) for TPS and tach signal for an N2O window switch.
____________
ZX-12R, stock motor, Muzzy/PC3 63in, 60-shot dry, 750#, 9.001
ZX-14, stock motor, Brock smeg/PC3, 63.5in, ~750#, 9.31 NA, 8.95 40-shot dry.
NorthwestDragbike.com
  
|
entropy
Moderator
Posts: 8671
|
posted January 25, 2005 04:40 AM
take any of the 4 wires out of the ECU which go to the stick coils for tach,
TPS is also outa the ECU
you need a diagram
____________
This moderator uses moderation in moderation
|
zrexpilot
Expert Class
Posts: 470
|
posted January 25, 2005 12:10 PM
quote:
take any of the 4 wires out of the ECU which go to the stick coils for tach,
TPS is also outa the ECU
you need a diagram
I do, please.
|
Farmer Rog
Novice Class
Posts: 92
|
posted January 26, 2005 09:35 AM
Wires from the ECU (thanks Wimp) for TPS and tach signal........
TPS is pin 42 (yellow/white)
Tach is pin 1 (black)
____________
ZX-12R, stock motor, Muzzy/PC3 63in, 60-shot dry, 750#, 9.001
ZX-14, stock motor, Brock smeg/PC3, 63.5in, ~750#, 9.31 NA, 8.95 40-shot dry.
NorthwestDragbike.com
|
|
|
HOME
NEW TOPIC