mrsantafe

Zone Head
Posts: 521
|
posted October 04, 2004 09:41 AM
light weight wheels performance?
I've been on the busa boards and different wheel manufacturers sights with the intent of getting some more performance out of my bike.
Has anyone done any actual back to back testing of qtr-mile performance gains (et and mph gains)?
How about roll on performance?
Marvic wheel claims on a stock busa .15 and 2mph gain in the qtr.
Lurking on the busa board i found fellas making claims of .2 and 3 1/2 mph gain in the qtr with bst wheels. Additionally, claims of 2 to 3 seconds of there lap times. I'm not doubting there claims because they seem to be resonable.
I understand the basics of having lighter wheels, better handling, breaking, etc. I was simply wondering what kind of gains some of our board members were getting for comparitive purposes. thanks!
____________
9.78@155.13 mph 1.71 60 ft @ a near mile high dragstrip
2006 ZX14 gone
2006 ZX10r (Wifes street bike)
2004 zx10r (her race bike)
2002 ZX12 (still kicking a--)
2007 gsxr 1k (race bike)
|
Megabyte

Pro
Posts: 1047
|
posted October 04, 2004 09:55 AM
I know the rotational inertia of the lighter wheels is less than stock, so it makes since that they would require less HP to spin up....
____________
We First make our habits and then our habits make us.
|
ZCatDude
Novice Class
Posts: 58
|
posted October 04, 2004 03:19 PM
Has anybody actually seen back to back dyno runs using lighter wheels vs stock wheels? If so, what did it show?
|
pdb1964

Zone Head
Posts: 536
|
posted October 04, 2004 03:30 PM
I imagine that there will be more HP at the wheel (transfered to the dyno drum). With less inertia in the drive train, everything will spin up faster and the dyno will translate that as more HP.
Just my $0.02
|
EastBayDave

Needs a job
Posts: 2245
|
posted October 05, 2004 04:40 AM
I can't give numbers; but when I put my Dymags (5-spoke "sports mags")on I noticed the weight loss immediately upon pulling out of the driveway. Once up in the twisties, the real performance gains were felt- primarily a huge gain in side to side transisition speed.
"Flipping" the bike back-&-forth thru a series of esses is where you really feel it, it just "flips" faster & much easier than before. My guess is this is primarily due to the reduction in rotating mass, thus less gyroscopic forces preventing the direction change.
I don't notice much if anything in braking or acceleration; perhaps numbers at the drags are improved but I can't feel it. The big thing is the "bling" factor is always hugely improved w/mags of any type. That's why I will be entering the bike in a local car show next summer...
Pictures are over on Fish's site under "wheels" section...
____________
Enjoy the ride!
02' ZRX1200
00' ZX12R sold
|
TurboBlew

Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted October 05, 2004 04:52 AM
I dont think HP would show on the dyno.
2/10ths/ 3mph is alot to claim... all things being equal.
On bigger bikes like the 12 and Busa.... even the cheapest aftermarket wheels like the RC Comps.... make a huge difference. So spending $3500+ on a set of BSTs...
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
Scooter

Zone Head
Posts: 899
|
posted October 05, 2004 05:19 PM
Just read something in Sport Rider about this (Dec '04 pg 82). Concerned rotating mass and acceleration. In a nutshell it said 2 lb of rotating mass reduction equals 3 lb off the frame. Figure hp/wt ratios in and you get...? But then that was for both wheels. If your carrying the front for most of the track....? Food for thought.
____________
"Growing old is inevitable, growing up is optional."
|
cowboy

Pro
Posts: 1061
|
posted October 06, 2004 08:55 AM
Thinking about selling my Marchesinis.If interested PM me.
I never did back to back dyno runs but did back to back 1/4 mile runs with at least 1 tenth average gain.Then I added Ceramic bearings and seen another 1 tenth average gain.
|
EastBayDave

Needs a job
Posts: 2245
|
posted October 06, 2004 03:59 PM
quote: Thinking about selling my Marchesinis.If interested PM me.
I never did back to back dyno runs but did back to back 1/4 mile runs with at least 1 tenth average gain.Then I added Ceramic bearings and seen another 1 tenth average gain.
Now that's a quote I been looking for CERAMIC BEARINGS!!!
I've been very curious about these; last I checked a couple years ago they were basically an arm&leg $$$$ to purchase them. Curious what you paid, & what (if anything) you can feel beyond the .10 at the drags you mentioned earlier?
Thanks!
ebd
____________
Enjoy the ride!
02' ZRX1200
00' ZX12R sold
|
crashtech

Zone Head
Posts: 574
|
posted October 06, 2004 04:40 PM
I am looking for a set of wheels, cowboy you have a PM.
|
cowboy

Pro
Posts: 1061
|
posted October 07, 2004 07:44 AM
quote:
quote: Thinking about selling my Marchesinis.If interested PM me.
I never did back to back dyno runs but did back to back 1/4 mile runs with at least 1 tenth average gain.Then I added Ceramic bearings and seen another 1 tenth average gain.
Now that's a quote I been looking for CERAMIC BEARINGS!!!
I've been very curious about these; last I checked a couple years ago they were basically an arm&leg $$$$ to purchase them. Curious what you paid, & what (if anything) you can feel beyond the .10 at the drags you mentioned earlier?
Thanks!
ebd
I could not really "feel" the difference but I only had time to install the rear when i put a new tire on.The bearings for the front are still new in the box.I don't remember the price but think it was around $400 for the set.I also installed the tranny bearing but can't remember what that cost either.I think I wanted to forget the cost.lol
|
cowboy

Pro
Posts: 1061
|
posted October 07, 2004 07:44 AM
I'm getting to the PM"s guys ASAP
|
EastBayDave

Needs a job
Posts: 2245
|
posted October 07, 2004 02:51 PM
quote: Now that's a quote I been looking for CERAMIC BEARINGS!!!
I've been very curious about these; last I checked a couple years ago they were basically an arm&leg $$$$ to purchase them. Curious what you paid, & what (if anything) you can feel beyond the .10 at the drags you mentioned earlier?
Thanks!
ebd
I could not really "feel" the difference but I only had time to install the rear when i put a new tire on.The bearings for the front are still new in the box.I don't remember the price but think it was around $400 for the set.I also installed the tranny bearing but can't remember what that cost either.
wooohooo....still expensive...wonder if Dougie runs those on the Muzzy race bike?
quote: I think I wanted to forget the cost.lol
I agree...that's why I forgot about bearings for a few years...
____________
Enjoy the ride!
02' ZRX1200
00' ZX12R sold
|
|
|