EastBayDave

Needs a job
Posts: 2245
|
posted September 25, 2004 07:30 AM
Muzzys & Doug Meyer ROCKS!
A big THANK YOU to Doug Meyer @ Muzzys for going above & beyond the call of duty! My Muzzys damper (Hyperpro) decided to leak all its oil all over the bike, so somewhat miffed I call Muzzys & am told (by "Dave") it's out of warranty, sorry, tough luck. Oh, now I'm really mad...
Now, if some of you who've been around awhile recall; many of them were defective new, & Muzzys took care of everyone under warranty at the time. Mine was new but not leaking (I don't ride this bike much.) My inquiry to Dave @ Muzzys (2 yrs. ago) is "what do I do if it fails later," he says "we will take care of it!" Wow...very cool.
Fast forward 2 years. Now it's leaking, & it's out of warranty says Dave. He doesn't recall our previous conversation (that's expected as he talks to thousands of customers) Uh oh, now what do I do? He gives me a number for the US Distributor Micron, & I call them. Seeking any help at all, I get a quote of a much too high of a price for a "rebuild" of my existing damper. "No, wait a minute I was promised it would be covered." Micron was of no help as expected as they have no knowledge of what Dave @ Muzzys promised at the time..."that is the deal, that's it."
So, I send an e-mail to Doug Meyer @ Muzzys w/all the details. Doug calls & says "let me see what I can do." He didn't have to do this, but he did anyway. COOL Doug!!!! So, some number of days & phone calls later, Doug gets me in touch w/Mike at Micron, who gets me a much better deal on a new "replacement/exchange" of my original. All I have to do is ship my old one; & they will ship me a new one for an inconsequential fee.
A few days later I ship the old one back, & a ~couple weeks later, a new damper arrives in the box brand new & ready to go. I liked the looks of the old one better, but hey, beggars can't be choosy. I mount it up, & bingo I'm back in business. Awesome!!!
I post this now as I want to publicly thank the folks @ Muzzys, Micron, & especially Doug Meyer for taking care of me. They didn't have to, & considering I am not a big customer like some, Doug went way, way, WAY above & beyond the call of duty. Doug made at least 4-5 calls/e-mails to Micron, even while out racing & on the road! He didn't have to take the time out of his busy racing schedule to do this....DOUG & MUZZYS ROCKS!!!
This kind of customer service is why I keep going back to Muzzys, they are the best.
Thank you again Doug! All the best...
Dave
____________
Enjoy the ride!
02' ZRX1200
00' ZX12R sold
|
swft

Needs a life
Full throttle!
Posts: One MEEEEEELLION
|
posted September 25, 2004 08:08 AM
Always a pleasure doing business with Muzzys.
|
WARBIRD

Needs a job
Posts: 2739
|
posted September 25, 2004 08:13 AM
Very nice EBDave........... It's great to see someone actually SHOW they appreciate good service. I am sure Dave,Doug and Micron will be happy to see this post. :up:
____________
I'd Rather Be Roadracing.
|
kangpow
Expert Class
Posts: 144
|
posted September 25, 2004 11:44 AM
When my Power Commander went out I called Dynojet, but it was a 18 months old so it was out of warranty. So I called Muzzys( because that is where I purchased it) and they said they have not had any go bad. Muzzys said for me to buy another one, the odds of having two go bad is very slim. I guess Muzzys does not mind me spending $400.00 Every year and a half.
Thanks Muzzys and Dynojet.
|
deathpulse

Pro
Posts: 1688
|
posted September 25, 2004 08:16 PM
Muzzys is the BEST customer service I have ever experienced. Where else do you do business with a company that frequents websites like this, and offers techical support (see my muzzy clutch and basket install questions) and advice? I am now a LOYAL Muzzy's customer after the amazing treatment I have recieved from Doug and the Muzzy's crew over the past 4 years of owning my '12! I won't trust my lady to anyone else.
|
hawkman
Zone Head
Posts: 747
|
posted September 25, 2004 10:45 PM
Edited By: hawkman on 25 Sep 2004 23:46
Doug at Muzzys. :thumbsup:
Dave at Muzzys and Micron.
|
|
|
|
|