Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 24, 2002 08:01 AM
New Undertail Pic
I appologize for the shitty pics, soon as we get a sunny day I'll roll the bike outside and get some good shots of it. It fits great, looks awesome, and I couldn't be happier with it. Well if is was $100 or so cheaper it wouldn't have hurt. 
I've got to give Robert at Graphic Art Moto Design props for a nice product, it fit like a glove, no tweaking needed anywhere.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
  
|
BlackMandingoWarrior
Expert Class
Posts: 320
|
posted January 24, 2002 08:21 AM
That Does Look Good...
Did you lose or gain any trunk (storage under the passenger seat) space for this installation?? What's your opinion on the license plate illumination and turn signal brightness??
|
Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 24, 2002 09:20 AM
 Edited By: Ninjaman12R on 24 Jan 2002 09:21
Undertail
I will lose some underseat storage space, especially if I install the computer like per the insructions. But I'm gonna custom build some type of mount for it, and the PC3r when it gets here, to try and save as much space as possible. I don't think i'll end up losing much space. There is a small light to illuminate the plate and I haven't wired the turn signals yet. Gonna do that tonight, may or may not wire up the light for the plate. Stealth mode baby. Seriously I may not wire it up.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
harryzx-12
Needs a job
Posts: 3643
|
posted January 24, 2002 09:52 AM
Looks pretty good
From what I can tell. Hopefully you can get some better pics soon.
____________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways- Body thoroughly used up, totally worn out...Screaming "WOO HOO, What a Ride !!!"
|
BlackMandingoWarrior
Expert Class
Posts: 320
|
posted January 24, 2002 10:09 AM
Thanks...
What's the website url for Graphic Art Moto Design??? I think I will spend the duckets on this one too.
|
Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 24, 2002 10:42 AM
BMW
http://www.graphicartmotodesign.com/tails/tails.htm
Man I can't wait to get better pics, this thing fit like a glove, looks very slick.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
BlackMandingoWarrior
Expert Class
Posts: 320
|
posted January 24, 2002 11:54 AM
Thanks....
Got it saved now!!!
|
TripodMeat
Expert Class
Posts: 125
|
posted January 24, 2002 02:04 PM
Looks good!!
If I may, what was your final $$$$ total $$$$$ ??
including shipping??? and how long did it take you
to install??
|
Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 24, 2002 02:25 PM
Wasn't Cheap..........But ......
It took me 3 or 4 hours to do, but that was really taking time to try and do it right. I've still got to wire in the turn signals and license plate light tonight.
The cost was $337 total. I know that's kinda steep but this thing fit like a glove, and looks awesome. I WILL get better pics because Robert wants some to put on his website. My 12 is the first red one to have this undertail put on it and he wants pics to post.
To give you an idea of what a mess you'll make putting this thing on look at these pics.
But it all pays off, and again, these pics suck, but you get the idea.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
Engage
Expert Class
Posts: 106
|
posted January 24, 2002 02:37 PM
Was on the fence before but now with the feedback on it I'm all over this one too!!!!
|
sailusvi
Expert Class
Posts: 216
|
posted January 24, 2002 02:44 PM
Is that carbon mans product?
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted January 24, 2002 02:46 PM
Ninjaman...download a photo editing program or email me and Ill send you a copy of one. Makes minor adjustments easy.
Looks good BTW!!
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 24, 2002 03:33 PM
Thanks....
TB,
Thanks I may end up having to do that. That is if we don't get any sunny weather that will allow me to roll her outside and get some good pics.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
SleezyRider
Novice Class
Mean Motor Scooter
Posts: 79
|
posted January 24, 2002 04:43 PM
I ordered one of these last week and it showed up at the door yesterday. According to Robert he is coming out with an upgrade to make the turn signals brighter. He said these will be available soon.
Hopefully I can install mine this weekend..
|
Turbo810
Expert Class
Posts: 286
|
posted January 24, 2002 04:44 PM
I finally got to meet Robert in person at the N.Y.C. bike show last month after two years of of instant messaging and phone conversations. He is one of the nicest guys in the industry you could hope to meet.
I also got to compare his undertail to the Eurobikes. Roberts product is 1000 times the quality of Eurobikes(no that's a typo I ment one thousand times). The Eurobikes stuff was very cheap and flimsy. Roberts is a lot more study well made.
|
ZX12Girl
Pro
Adrenaline Junkie
Posts: 1740
|
posted January 24, 2002 04:46 PM
Awesome!!!
I like it!!
____________
Life is an adventure. Are you driving?
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted January 24, 2002 07:10 PM
MT NinjaHolic Crack Pipe???
NinjaMan... Whats with the pipe dude??? Are you making a crack pipe to go with that sweet looking undertail??? Please say it aint so!!!
Anyway, did you start her up with the can off??? I can hear it now!!!
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 24, 2002 08:20 PM
You know better than that Rick!!!!!!!!
Actually I've got a full system sitting in the box just waiting to be put on. It's a Yoshimura stainless/Ti can RS-3 Duplex Race system. I'm waiting on my fan from Muzzy's and my PC3r to get here. I'm ready to get it all back together so I can clean it up, take some GOOD pics, and go see how good it wheelies. I just put the hans hugger and the undertail on this week. Next week I'm gonna do the oil pressure mod, put the yosh on, put the aluminum fan on, and install my PC3r.
Then I gotta order a rear tire.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 25, 2002 05:24 AM
Wiring.....
Did the wiring last night, didn't use the crimp on connectors. I soldered everything and used shrink tube over my solder joints, then taped over it. Should be good to go now. I went ahead and wired up the license plate light, it looks pretty cool actually. Everything worked fine.
I'm tired of seeing my bike in pieces, I'm ready to get it back together FO SHO. Probably be next weekend before I get everything done though. 
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 25, 2002 05:26 AM
install
quote:
I ordered one of these last week and it showed up at the door yesterday. According to Robert he is coming out with an upgrade to make the turn signals brighter. He said these will be available soon.
Hopefully I can install mine this weekend..
Gimme a shout if you run into any problems.............
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted January 25, 2002 01:01 PM
Wheres that Boss Hoss now!!!
Ninja... After you install the pipe and PC, go look for that Boss Hoss and get a qualified video guy!!! So, that we all can see how you destroy it again!!!
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
Engage
Expert Class
Posts: 106
|
posted January 25, 2002 07:00 PM
Recieved email back from Robert at GraphicMoto and he within the next week the turn signals will be LED!!! I am so sold on this!
|
Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 25, 2002 07:20 PM
LEDs
quote:
Recieved email back from Robert at GraphicMoto and he within the next week the turn signals will be LED!!! I am so sold on this!
he better hook a MF up then.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
SleezyRider
Novice Class
Mean Motor Scooter
Posts: 79
|
posted January 26, 2002 04:50 PM
NinjaMan, you have mail
|
|
|
HOME
NEW TOPIC