tuusinii
Pro
Posts: 1031
|
posted June 18, 2004 02:12 AM
I'm ready....
Yes I made it. This wednesday I got my Master's of Science degree from Helsinki University of Technology. My major was automation and system technolgy... Well perhaps I can't call myself a student anymore...  But when I think about it it was 18 years ago when I started in the first grade - so maybe it was about a time.
But life is good - as long as I can ride the ZX12 
  
|
kickstartmyheart
Novice Class
Posts: 57
|
posted June 18, 2004 11:28 AM
Congratulations on the MS degree!
So buy your 12R something and hop on the girlfriend to celebrate...or is that the other way around?
Job well done.
Mike
____________
Mike
2000 ZX-12R, Green
________________________
Life, love, and liberty above all else
|
worm~hole
Needs a life
Miles to go before I sleep....
Posts: 10623
|
posted June 18, 2004 11:38 AM
WELL DONE!, tuusiniibabeee!!!
____________
“We sleep safe in our beds because rough men
stand ready in the night to visit violence on those
who would do us harm.”
-George Orwell
|
n da zone
Expert Class
Posts: 215
|
posted June 18, 2004 12:58 PM
Congratulations Toni! Now the REAL work starts, finding that job. My daughter is enrolling in the same program this fall here in Florida! Good field to be in ... lots of us on the board are in Info Systems somehow.
|
frEEk
Administrator
ummm... yeah
Posts: 9660
|
posted June 18, 2004 03:49 PM
interesting subject, touched on that a bit in my studies back when. hope ya get a good job that really makes use of your newly certified knowledge!
|
entropy
Moderator
Posts: 8671
|
posted June 19, 2004 12:38 AM
 Edited By: entropy on 19 Jun 2004 14:12
quote:
Yes I made it. This wednesday I got my Master's of Science degree from Helsinki University of Technology...
Maybe I can buy you a celebration beer next Tuesday nite; I will be in Helsinki for one night 
CONGRATS!!!
____________
This moderator uses moderation in moderation
|
oldkawboy
Needs a job
Posts: 2125
|
posted June 19, 2004 04:47 AM
Ah yes, automation......Kinda touchy subject here where I work as our employer is "Automating" all of our hydro plants from one location.
Technology is a wonderful thing, I'd hate to still be using a crank to start my car!
TVA is spending like $100 million to run these plants from a contol center and only 100 operator jobs are going away, mine included, but since I'm retiring next year...no biggie.
Glad you got through school, I know it must have been tough.
Congratulations.
Dan
|
deathpulse
Pro
Posts: 1688
|
posted June 19, 2004 09:02 AM
HEY CONGRATS!!! What sort of job/job sector are you looking to enter? Just curious, maybe one of us can help locate a job for ya .
|
Scooter
Zone Head
Posts: 899
|
posted June 19, 2004 12:01 PM
Well done.
OKB, 100 reductions. Glad I didn't pursue that Oper job at Kingston too seriously.
____________
"Growing old is inevitable, growing up is optional."
|
entropy
Moderator
Posts: 8671
|
posted June 20, 2004 02:17 AM
tuusinii,
On Jun 22, I will be staying at:
Hotel Marski
Mannerheimintie 10
(tel +358 (0)9 68061)
I would be honored to buy you a celebration beer or two if you are near there!!!!
____________
This moderator uses moderation in moderation
|
tuusinii
Pro
Posts: 1031
|
posted June 20, 2004 08:54 AM
Yes it would be very nice to meet - and of course If You pay the beer!!!! I'll try to get to You and thanks for everybody else too... Don't have much time now...
Toni
quote:
tuusinii,
On Jun 22, I will be staying at:
Hotel Marski
Mannerheimintie 10
(tel +358 (0)9 68061)
I would be honored to buy you a celebration beer or two if you are near there!!!!
|
tuusinii
Pro
Posts: 1031
|
posted June 20, 2004 10:02 PM
Thank You, everybody....
Well I consetrated to automation systems that control big factorys and
also robotics because that seemed like a fun subject. But I also took
couple cources of process identification and control so I've had my share
of transfer and statespace functions :-). My minor was mostly power
electronics and electric drives because I think that after all the neat
electric stuff it's the "heavy" electric that keeps this world rolling...
Now I'm working for big Finish Paper machine company - called Metso Paper
- You may have heard of it if You're into paper making world. Or Metso
corporation is also in mining (Metso Minerals) and also in automation
(Metso automation). I work for RD and now mainly in remote diagnostics of
papermaking machine. Which is the subject that I made my thesis.
Don't konw what I'll do after this summer but I'm looking forward to that
- and at least I can ride now more because there isn't much homework anymore...
|
|
|
HOME
NEW TOPIC