RocketRacer
Novice Class
Posts: 82
|
posted January 17, 2002 07:29 AM
quote: ...I surgically and carefully removed it from the tight shrink wrap, checked for blade deformations (none), trimmed the gasket per instructions, installed the fan per instructions with the radiator out of the bike, checked and rechecked and hand spun it for clearance (snag/rub free)...no blade trimming...and it still sounds LOUD when it kicks in, not like a rattle as if something's loose, but more like a LOUD noise as if a blade or something if creating a major disturbance as it whips the air around down there...make sense?...this is with a full MUZZY installed!...and I'm definitely not deaf....I was told by my fellow 12R riders who ride bone stock bikes that it sounds "cheap" or "agricultural"....hmmmm......
EXACTLY!! I did all that during my installation, too. "Rattly noise" may not have been a good description - I think you nailed it better. And like you said - it isn't hitting anything. I'd like the Muzzy's fan if it didn't sound "cheap".
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 17, 2002 07:32 AM
Excellent Info Guys........
Thanks Dave and Otis. I've always been curious about the water wetter. I've heard some guys who dirt track race here swear by the stuff.
Dave can you elaborate on the "Burping" of the coolant system. Also what is the correct amount to of watter wetter to add in the 12's coolant system.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 17, 2002 09:57 AM
Redline Water Wetter.....
I just ordered a couple bottles of Water Wetter. I know I don't need that much for the 12, but it was cheap, and I may hook some of my buddies up with some for their bikes.
Anyone know the cooling system capacity on the 12????
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
Bigju
Expert Class
Posts: 238
|
posted January 17, 2002 03:51 PM
I have had the muzzy fan since the spring of last year and havent had any problems "rattling" cant tell the difference between it and the stock fan sound wise. I think I'll do the water wetter and Muzzy clutch this summer.
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 18, 2002 06:20 AM
I'm really interested in seeing if the water wetter makes a difference. I think it will.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
EastBayDave

Needs a job
Posts: 2245
|
posted January 18, 2002 07:41 AM
Muzzy fan w/Akra pipe. No rattle here; slightly louder cuz it moves more air. (Ever put your hand up to the side "vent" in the fairing? You can feel the wind is much stronger w/Muzzys fan.) One of the cheapest forms of insurance you can get...
I use Water Wetter too; burp it several times to free bubbles. Between the fan & the WW the bike runs much cooler & fan doesn't run as much, or as long, as before...
Now wondering what Muzzys is doing about the 02' ZX12r "dual fans?" Wondering if the two 02' fans could be retrofitted onto the 00' & 01' ???
____________
Enjoy the ride!
02' ZRX1200
00' ZX12R sold
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 18, 2002 08:41 AM
Burping....
How are you guys burping the system, letting the bike heat up with the cap off????
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
Otis

Needs a job
Captain Kickstand
Posts: 3028
|
posted January 18, 2002 08:54 AM
That's what I did Rick, leave the cap off and fire up the bike and let it warm up good. I actually heard the "burp".
____________
It's a free country brother
|
DaveInDaytona

Pro
Posts: 1696
|
posted January 18, 2002 08:58 AM
Rocking it a little helped too. Right - left, roll up - front brake.
I tried to get it up on my shoulder and pat it on it's back but that was tough.
____________
DaytonaSportbikes Forum
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 18, 2002 09:03 AM
Thanks guys......
Man this group is awesome. I appreciate the advice Otis.
Now Dave, surely a strapping individual such as yourself could hoist the 12 up onto his shoulders.
BTW, thanks to your pics ol' Hans sold another hugger. Thanks again for the help, your alright in my book.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
hondo

Expert Class
Posts: 140
|
posted January 18, 2002 12:35 PM
Muzzy's fan
I too installed a Muzzy's fan when I put on my Yosh system, cheap insurance I believe. I think I'm reading two things here. The post about the fan being quiet when the motor is off. If you're off the 12 then the fairing probably is muffling the fan noise. The fan is loud, but it just like changing a little window fan for a double throw down industrial window fan. More air movement equals more noise. To be honest, I thought the stocker was loud enough. When it would kick-in at a stoplight, cars next to me have never failed to look over to see what was going on. That leaves the other, when on the 12 you're essentially over the fan so any extra blade noise is transmitted right to our ears. I actually like the noise. Lots of clearance with the Yosh, no trimming needed.
Man, the Red ones are coming out of the closet!
____________
Candy Persimmon Red may be slower, but I'm trying!
|
RocketRacer
Novice Class
Posts: 82
|
posted January 18, 2002 01:26 PM
Edited By: RocketRacer on 18 Jan 2002 13:31
I can't explain the noise any better than I already have. You'd have to ride my bike and hear it for yourself! I can be sitting on the thing at a stoplight and when the fan comes on it is noisy - not just a "moving a lot of air" kind of noisy. After listening to it for just a few seconds I can shut the engine off (still sitting on the bike!) and the fan continues to run - but it doesn't have the weird noise. It has a different sound than the stock plastic fan blade, but there aren't any unusual noises unless the engine is running.
The fan motor is being run at a higher voltage with the engine running (maybe 10% or so higher voltage), so MAYBE the corresponding increase in speed is enough to make it noisy?? I suppose I could install a resistor in series with the fan motor to drop the voltage down to 12.0 - 12.5 Volts at the fan motor with the engine running as an experiment. Or, I could simply take the fan blade off and replace it with my stock plastic one!!
Once again, I'm not knocking the aluminum fan blade - I like the idea of running it instead of the plastic one. I just don't like listening to the racket mine makes.
[We should get Easyrider to post on this, too. I know he is one of the others that have complained about the "rattly" sound.]
|
redelk

Moderator
Please... speak to the hand.
Posts: 3212
|
posted January 18, 2002 03:39 PM
Fans
Here's a few thoughts...
The plastic blade melts enough to sag, but not rub or lock up. The blade becomes unbalanced and causes excessive wear on the fan motor. The fan motor quits. Ask you dealer what the retail cost is for part number 59502-1133.
Highly unlikely? Yeah, your probably right. Okay then, try this...
The plastic blade melts enough to where it starts hitting or rubbing against the fan shroud and tweaks the the thin "piece of crap" shroud. Ask you dealer what the retail cost is for part number 59502-1133.
You could always bend the shroud back, right? Yeah, your probably right. Okay then, try this...
The plastic blade melts enough to actually lock up the fan. Of course this will result in a blown fuse. You notice the fan isn't working, so what is the first thing you check? The fuse. You continue to replace fuses as they will blow everytime the fan tries to come on. After replacing a few fuses, you start to realize that the problem could be something else.
The thing is, you might have completely forgotten about the possibility of the fan locking up and you start a wild goose chase looking for a short in the electrical system. After all, you reached in there and it "felt like" the fan blade could turn freely, right. No short, the fan "feels" like it can spin freely, so you continue to replace fuses for a while.
Now, one of three things will result. Two are possiblities and the other will be a "fact". One of the possibilities will be that you eventually burned up the fan motor. If this is the case... Yep, ask you dealer what the retail cost is for part number 59502-1133. The other possibility would be that you eventually did melt the fan and now you'll have to get that aftermarket fan blade. Or, you could always ask you dealer what the retail cost is for part number 59502-1133.
In other words, KMC has ONE part number for a "fan assembly"... 59502-1133. You can't get just the shroud, the motor or even the blade, seperatly. It's sold as "one unit". Go ahead and check out what the price is for this lil' baby. Please be seated befor you call.
Now the third aspect will be a "fact". No matter if your replacing the whole fan unit or just the melted plastic blade, the will be only one way to do it. You'll have to take everything apart to get to it. Yeah, you probably won't have to remove the header or the radiator, but you'll probably be scrappin' a knuckle or two. Not to mention the possibility of tweakin' several radiator fins.
All the while, you'll get the pleasure of cussin' at yourself, since you already had everything taken apart for the installation of the new exhaust. At that time, installing the new fan blade would have been done in mere minutes. Now, you get to spend a hour or two, taking everything apart, scraping your knuckles and probably tweak several radiator fins.
Just think, all of this could have been avoided for less the $40. Not likely to happen? How often does your fan come on? Several times durning a day's ride or it doesn't come on all weekend? In either case, do you really need to save the $40 and the 15 minutes (while installing the new exhaust) to find out? You check your chain and your tire pressure often, right? Even if they are new, right? Why? What is it called? Hmmmm.... I think it's called... CHEAP INSURANCE!
Guess what, not only to you get "cheap insurance" for something that might not happen (kinda like no one "plans" on wrecking their car, but they buy insurance anyway), you get more airflow to boot. Hmmmm... no possibility of melted blades, no possibility of undo wear on the fan motor or even failure, massive savings of time and more airflow to boot. All for less the $40? I don't know. You tell me. Is it worth it?
BTW, I melted the fan and tweaked the shrould (it's harder to get it back to being perfectly round then you think) on my 7R and it had the STOCK header on it.
____________
There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.
-Ernest Hemingway
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 18, 2002 03:49 PM
dammit sherm......
You've sure got a way with words.
I've been on the fence about this fan deal and that is why I started this thread. At first I though "Hell it's cheap insurance, it ain't like it cost a ton of money". But then after reading some of the guys comments I figured I probably didn't even need it. Then the rattling issue came up. All good points, and I'm thankful for everyone's input. But I ordered the fan today just to see what the heck my results will be. It may be overkill, but let's face it, a freakin' 12R is overkill in many ways. I will be sure to post my experiences with it after I get a chance to put it to the test.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
redelk

Moderator
Please... speak to the hand.
Posts: 3212
|
posted January 18, 2002 03:54 PM
As for the warer wetter...
I haven't really thought about it that much. I'm one of those guys who's fan almost never comes on (maybe I need to check my fuse). I might see 5 stop lights in 250 miles. After all, I do live in ARKANSAS! Hell, we just got electricity a few years back! My bike's temp gauge spends 90% of it's time a little above the 1/3 mark. I think the only times my fan comes on is when I'm warming up the bike and end up piddling around too long in the garage (which is almost every time).
As for burbing the cooling system, I've alway bled the system a bit from the drain plug and then warmed the bike up and then topped it off at the radiator.
____________
There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.
-Ernest Hemingway
|
RocketRacer
Novice Class
Posts: 82
|
posted January 18, 2002 05:20 PM
I agree with ya Redelk - thinking like that is why I bought the Muzzy's fan blade in the first place.
On the other hand, I've got the extended warranty and it doesn't run out until mid-May of 2004. How much does that fan assembly cost when (if!!) it has to be replaced under warranty? Heck, they can't even seriously argue that the fan melted because of having a stainless steel aftermarket exhaust - the factory headers are stainless steel, too. And with the reduced back pressure and loss of the cat with the aftermarket system the pipes sure shouldn't get hotter than the stock headers.
Just disappointed that the aluminum fan sounds like a cheap piece of shit on my "flagship" bike. CHEAP insurance ... yeah, that's a fitting way of looking at it - in more way than one!!
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted January 19, 2002 06:50 AM
Hey redelk.........
You know that I know all about Arkansas!!!
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
|
|