quote:betrayal.. hehehe.. ya right... KMC has a lot of catching up to do with the 12R to make it anywhere near the bike the 10R is... imagine what they could do if they pumped the 10R's tech into the 12R... then we'd be talking!
Alright fish..........in what areas do you think the 10 is superior to the 12 and why? Not disagreeing.......just want you opinion......... ____________
I'd Rather Be Roadracing.
posted April 11, 2004 11:21 AM
Uh... is this a serious question?
...same real wheel horsepower STOCk as my 12R did with a full system and a powercommander...
.. same handling as the 636... no more "land yacht" aka 12R ...
... weighs 120lbs less wet....
... do I need to continue? I've ridden both and I have owned all of the above... the choice is clear... it's a no brainer.. .just look at the price of 12Rs on the showroom floor right now...
it says it all. (and that's not just my opinion)
The only time the 12R would serve a purpose would be if the rider was physically too large (ie aver say, 6'4"/ 6'5" and weighed in at more than, say 250lbs... those are good starting #'s ..
the 12R iss a great sport tourer, but not as good as the ZZR...
it is, however a great dragbike.
oh.. the ergos are more comfortable as well.
____________ What business is it of yours where I'm from, Friendo?
Needs a life
Miles to go before I sleep....
Posts: 10623
posted April 11, 2004 11:48 AM
quote:
The only time the 12R would serve a purpose would be if the rider was physically too large (ie aver say, 6'4"/ 6'5" and weighed in at more than, say 250lbs... those are good starting #'s ..
...heh heh...I bet wisspy-waife-like DINO has something to say about that...his purpose is maybe to demoralize wannabes and pretenders on newer, lighter bikes while looking back at them as he forward thrusts at unbelievable lean angles...maybe the land yatch need better captains, yes?...don't get me wrong...I absolutely want to have a 10R of my own, but in the end its almost all the time all rider, yes?.... ____________ “We sleep safe in our beds because rough men
stand ready in the night to visit violence on those
who would do us harm.”
-George Orwell
posted April 11, 2004 12:03 PM
perhpas, but you rode the 10R and you had the exact same comments I did... the 12R is an armfull, and there's no denying that fact.
____________ What business is it of yours where I'm from, Friendo?
posted April 11, 2004 12:26 PM
Yes.......I was being serious..... Just wanted your opinion......
I think the reasons you listed all fall into the "sportbike" and "maximum performance" columns.
Using those reasons I guess I could have said the exact same things in 2001 when my wife bought her GSXR 1000.
EXEPT the horsepower thing..........I will have to wait and see a handful or more of production 10's.........broke in and ridden on the street by street riders............produce over 170 hp stock.......like most 12's with pipes and pc's do.
I feel that a lot of the excitment of riding the 10 has to do with it's VERY short wheelbase and peaky power spread.
And just to clarify myself..............I LOVE the new 10..... and am very glad Kawasaki produced it for mass consumption...............I just don't think the 12 is quite the "barge" you said above........ ____________
I'd Rather Be Roadracing.
posted April 11, 2004 12:42 PM
I honestly, after running this website for 4 years, do not think that your comment:
"produce over 170 hp stock.......like most 12's with pipes and pc's do"
is accurate... It has been my experience, and the experience of most members here who actually dynoed their 12Rs, that somewhere in the 160s rear wheel is a much more realistic figure for the 12R's output with a pipe and powercommander.... some get more, some get less but I'd say most fall into the 160s.
____________ What business is it of yours where I'm from, Friendo?
posted April 11, 2004 12:57 PM
O.K...........lets rephrase that and say the 160's.......( and don't think for a moment that I am NOT one of those members that actually dyno there bikes........I have a bike or two of my own and have seen many 12's in the 170's) I do not think that the majority of 10's will make 160 + hp in stock trim. Again........don't take me wrong.......since I have 2 12'rs, a Gixxer 1000 and an R6 sitting in the garage at present..........I still like the 10R the best of all the current 01+ sportbikes..........I don't think it's time to "shitcan" the 12R quite yet. ____________
I'd Rather Be Roadracing.
posted April 11, 2004 01:05 PM
We have seen quite a few Gixxers here in Kentucky with pipes and pc's getting 160's at the wheel on Dynojet 250's. Busa's get a little more and the 12R's generally have produced the most peak hp for a number of years. I am at 700 feet and we have "good air" here quite often so our slightly higher numbers could be a reflection of that altitude and good air. ____________
I'd Rather Be Roadracing.
posted April 11, 2004 01:44 PM
my did 164 and I'm at sea level. full muzzy with pc3r.
____________ What business is it of yours where I'm from, Friendo?
posted April 11, 2004 02:00 PM
Sounds about right..........ever use the tuning link software? By the way...........nice newborn 10 you have there............gonna paint the lower green? I was considering doing just that. ____________
I'd Rather Be Roadracing.
posted April 12, 2004 06:15 AM
You traded two bikes for the ZX10R fish? I'm REAL curious what kind of a deal you did $$$ wise if you feel like mentioning it.
I love my 12r, but can't seem sell it (no offers at all); so looks like I have no choice for now but too keep it. I want a 10R bad tho; maybe someone at KAW w/see that & have pity on me & get me a deal.....maybe they are still pissed I turned down a deal on the real Lawson replica (KZ1000S1 racer).....?
BTW, local dealers are getting $12.7K out the door here. That's $200 more than I paid for the 12r in 00'...
____________
Enjoy the ride!
02' ZRX1200
00' ZX12R sold
posted April 12, 2004 06:25 AM
I NEVER said I traded in 2 bikes for the 10R... never did I say that, nor did it happen.
____________ What business is it of yours where I'm from, Friendo?
posted April 12, 2004 07:37 AM
fish, i think u'r getting into the confusion of dyno numbers again there (see other thread). i suspect that an apples to apples comparison would show the hp on both bikes STOCK to be about equal, but i think the 10 having the same HP stock as a piped & tuned 12 is unrealistic. granted the dyno reports ur gonna hear are all over the place, but the average seems to be pretty consisten and in support of an approx equal stock HP. of course, till we have a number of same day same dyno comparisons we wont know for sure anyway.
posted April 12, 2004 07:37 AM
I sat on that 10 the other day. Orange like the day is long. It seemed to be missing something in the front end. The bars and forks compared to the 12 was dramatically different. And small. I fall into the above mentioned catagory
The only time the 12R would serve a purpose would be if the rider was physically too large (ie aver say, 6'4"/ 6'5" and weighed in at more than, say 250lbs... those are good starting #'s
and it felt too darn small. But man what a joy that thing would be for you
abercrombie models. I bet you can just flick that thing over in the turns.
I didn't ride it yet but hope to soon. Gonna look like a damn circus clown on a minibike I bet.
Great bike for you right size guys but I am viewing it for what it is, the pause before the zx15r.
Needs a life
living life, and loving it.
Posts: 7981
posted April 12, 2004 07:45 AM
I really like the loks and feel of the ZX10R,a dn would love to have one, but the only way I would get one is if I sold my ZX6RR and then bought one. I wouldnt trade the 12 in on a 10, they have 2 different purposes, in my opinion. I ride a lot, and put a lot of miles on my bikes. Hell the 6RR I bought at the last DGevent has almost 4000 miles on it, and I ride the 12 twice as much as I do the 6. The 12 is just a lot more comfortable for me on long trips, and with my saddle bags on it I can take it on weekend long adventures. I would never try that on my 6, or on a 10. JMO....And I will say that I have not yet ridden the 10, I am just speculating due to the crouch that it puts you in, and how similar it feels to my 6RR. Trading the 6 for a 10 is definately possible, and what a track bike it would be......heheheheheh
____________
When in doubt, lean farther and go faster....
posted April 12, 2004 07:47 AM
no freek.. I'm not getting the #'s confused... you have to remember that I actaully dynoed my 12R... the 10Rs #'s stock add up the the 12R's #'s with a pipe and PC, +/- a couple of HP... that's been the data floating around... and as for "real world" dynos... I'd like to see them done on a 10R that has, lets say, 2000miles on it... something that has been broken in... compare it to a similar 12R and my guess is that HP wise they'd be pretty much the same, .. torque would be down on the 10R... that's abot it...
____________ What business is it of yours where I'm from, Friendo?
posted April 12, 2004 06:30 PM
I dont know about that... both riders being equal the 10 would stomp the 12 in the twisties.
____________ What business is it of yours where I'm from, Friendo?
quote:
The only time the 12R would serve a purpose would be if the rider was physically too large (ie aver say, 6'4"/ 6'5" and weighed in at more than, say 250lbs... those are good starting #'s ...
Let me get this right,.... So if what you're saying is true,.. my bike serves no purpose for me?
I beg to differ. "land yacht" .....shame on you!
____________
uh oh
Moderator
Please... speak to the hand.
Posts: 3212
posted April 13, 2004 09:14 AM
Your on some good crack, Fish!
quote:I honestly, after running this website for 4 years, do not think that your comment:
"produce over 170 hp stock.......like most 12's with pipes and pc's do"
is accurate... It has been my experience, and the experience of most members here who actually dynoed their 12Rs, that somewhere in the 160s rear wheel is a much more realistic figure for the 12R's output with a pipe and powercommander.... some get more, some get less but I'd say most fall into the 160s.
Fish.... put the crack pipe down. PLEEEEZE!
I don't know what "members" your talking about, nor do I know why your 12R was so lame. I've seen over 20 12R models with pipes and a PC3 put out over 175 RWHP (SAE) with no problem. I know of three, right off the top of my head that consistently put out over 180. I've also seen the dyno runs of one member here who STOCK bike put out more than yours did WITH the pipe and PC#!
One of the three that put out over 180 was MINE! I have over twenty dyno runs on both a DJ150 and DJ250 that are over 170 RWHP. As a matter of fact, excluding yourself, I'm hard pressed to think of more than two people who's results were under 170.
Just on that misconception alone, it makes any other comment you might have concerning such issues kinda.... well... pointless.
____________
There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.
-Ernest Hemingway
posted April 13, 2004 09:24 AM
sorry but that hasnt been my experience... now.. since your in "middle america" I'd guess that there's a much better chance that it's YOU who'd on the crack pipe than me ____________ What business is it of yours where I'm from, Friendo?
All times are America/Va [ This thread is 3 pages long: 123Next» ]