Johnnycheese
Pro
Posts: 1008
|
posted February 23, 2004 09:15 AM
Rotor thread size???
ok I need to know the rotor thread size on a 12r is it 38x1.5?
or
35x1.5
or something else
Don't want to pay 140.00 for the tool from Kawai
  
|
osti33
Needs a job
Posts: 2973
|
posted February 23, 2004 12:05 PM
 Edited By: osti33 on 23 Feb 2004 12:41
Are you talking about pulling the rotor off the end of the crank? If so, My crank on my 2002 12 was a 20mm x 1.5 thread pitch bolt. I couldn't find a bolt that size at any local hardware store. Luckily we have our own machine shop where I work so I just made one on a lathe. I found a larger american size bolt and turned it down and re-threaded it in metric. Then I just used an impact wrench to pull it.
Hope this helps you out,
Ryan
|
Johnnycheese
Pro
Posts: 1008
|
posted February 23, 2004 12:55 PM
this is an internal threaded puller on a 00-01.
Threads on the rotor and then a smaller bolt runs in and pops if off the crank.
20mm was nowhere close
|
osti33
Needs a job
Posts: 2973
|
posted February 23, 2004 01:48 PM
I looked up the fiche and you are right. The 00-01 are different from the 02-03.
Sorry I couldn't help.
Ryan
|
Johnnycheese
Pro
Posts: 1008
|
posted February 23, 2004 03:13 PM
Fiqures.
I will try thr Kaw. dealer tomorrow
|
extremelean
Pro
Posts: 1651
|
posted February 24, 2004 11:03 AM
Johnny.........you cheaping out on me man?!?!
Check with K&L supply
|
|
|
HOME
NEW TOPIC