posted January 26, 2004 06:28 AM
Wasted 1 hour "MI" Last night! If anyone thought American Chopper was bad or did not like it, Just watch a show called Milwaukee Iron and you will then know that AC is better and that enough is enough! I actually felt sorry for them!
____________
Made History @ Daytona and still one fast old man!!
posted January 26, 2004 09:14 AM
Vince, if it isn't beer it should stay in Milwaukee, including but not limited to THE PACKERS, THE BUCKS, THE BREWERS, and FUCKING CHEESE!! You know a city sucks when they have the Brewers and not the Drinkers
posted January 26, 2004 09:30 AM
Dino, How old did you turn? It was Painful. I knew that when I saw then take a 3/8" extension to drive out the front wheel Axle and you could tell that that was the "Tool" of choice after seeing the rounded over end. I am sorry that you wasted your time also. The "Spread" at Daytona, where they have one bike at the back of the trailer and the Amature Machined from Billed side cover which did not even fit were the Low Lights.
BigJu, Not even that much Beer comes from there anymore. I hopt that they do not raise Tariffs so that only the Milwaukee Beer is affordable ____________
Made History @ Daytona and still one fast old man!!
posted January 26, 2004 01:26 PM
Five Zero?? Now the only way we can call you young is if you either Die or have a life threating illness (He is too young to have a stroke! or He died when he was just 57, "Still Young yet") Now that I am 60, all they can say is, "Well he lived a pretty good life! One day makes all of the difference.
____________
Made History @ Daytona and still one fast old man!!
posted January 26, 2004 02:13 PM
It was a waste of time. You can tell it's the same people that make AC, (which to me isn't that bad). Those stares off to the side of the camera as they do close ups and have them say something like "you know we are really under a time crunch so everyone has to get together or else we're not going to get this bike done in time for the show in ........"
____________ DaytonaSportbikes Forum
posted January 26, 2004 06:21 PM
It was a good laugh...I liked it....DONT take it so serious! Those guys are having FUN at work. The bike came out very nice. Look NO mechainic uses the "proper" tools to do the "correct" jobs all of the time.
____________
Thanks
Doug Ray
SpencerCycle.com
SpencerCycle Center Inc.
Spencer Performance Group Inc.
Toll Free 1-800-510-1945 ext #10
International 1-800-510-1945 ext #11
Local/Tech 1-704-642-0987 ext #12
Fax 1-704-642-0987
posted January 26, 2004 06:22 PM
It will never take the place of American Chopper...NOW i have to go and watch this weeks episode
____________
Thanks
Doug Ray
SpencerCycle.com
SpencerCycle Center Inc.
Spencer Performance Group Inc.
Toll Free 1-800-510-1945 ext #10
International 1-800-510-1945 ext #11
Local/Tech 1-704-642-0987 ext #12
Fax 1-704-642-0987
posted January 26, 2004 07:53 PM
I still cannot believe that i admit to likeing AC, but I do and cannot wait to see it! This was like a cheap Copy!
____________
Made History @ Daytona and still one fast old man!!
posted January 26, 2004 09:55 PM
Vincent.... you ever use a screwdriver as a chisel,pick,prybar? LMAO
I have and do it all the time.....see what i mean.
____________
Thanks
Doug Ray
SpencerCycle.com
SpencerCycle Center Inc.
Spencer Performance Group Inc.
Toll Free 1-800-510-1945 ext #10
International 1-800-510-1945 ext #11
Local/Tech 1-704-642-0987 ext #12
Fax 1-704-642-0987
posted January 27, 2004 05:42 AM
Of course I do, but do you think I aould let anyone see me do it?? I have a special drawer with all sorts of punches and pry bars, just for when someone is watching Then I have another drawer of the mangled beat to trash tools for when I am by myslef! Doug, the point is, I do not think that you would have done it on National TV knowing we would rag on you!
____________
Made History @ Daytona and still one fast old man!!
posted January 27, 2004 07:17 AM
OOOOH NO!!!!!!!!!!!!!!!! You are VERY CORRECTO MONDO!!!!
Doug
____________
Thanks
Doug Ray
SpencerCycle.com
SpencerCycle Center Inc.
Spencer Performance Group Inc.
Toll Free 1-800-510-1945 ext #10
International 1-800-510-1945 ext #11
Local/Tech 1-704-642-0987 ext #12
Fax 1-704-642-0987
HOME
NEW TOPIC
posted January 26, 2004 06:28 AM
