|
Thread: What would it take to run 6.50\'s 1000ft [ This thread is 2 pages long: 1 2 Next» ] |
BlackMagic14
Needs a job
Posts: 2007
|
posted May 07, 2012 04:18 PM
What would it take to run 6.50's 1000ft
Theoretically speaking: would a 69in 2012 14r with an ah2,pc, clutch mod, auto shift , 47or 48mm throttle
Bodies a head done by Jim at Competition CNC and a 75-80 shot of nitrous with a 175 pound rider
and a 1.30 sixty foot time run 6.50's in the 1000 ft. Stock clutch and stock suspension.
  
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted May 07, 2012 04:25 PM
that would be 1/2 second faster than Smokin, I say yes with your mods.
wee
|
smokinstorm
Expert Class
Old Drag Racer
Posts: 451
|
posted May 07, 2012 04:32 PM
A half second quicker, especially to the 1000' mark is tough to get when you're already running as quick as Lee is. Good luck in your quest. If you get it you're sure riding the heck out of the bike. That would make you somewhere in the neighborhood of a high 7.80 to low 7.90 bike in a 1/4 mile.
____________
2009 Monster Edition ZX14
It's all stock I swear. Well...almost.
2005 Turbo Busa
2001 GSXR 1000
2003 Turbo GSXR 1000
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted May 07, 2012 04:38 PM
quote:
A half second quicker, especially to the 1000' mark is tough to get when you're already running as quick as Lee is. Good luck in your quest. If you get it you're sure riding the heck out of the bike. That would make you somewhere in the neighborhood of a high 7.80 to low 7.90 bike in a 1/4 mile.
I'm not trying to take anything away from Lee but he doesn't have 48mm throttle bodies, a CNC head, or 80 shot of nos, that might help a little you think? lol
wee
|
smokinstorm
Expert Class
Old Drag Racer
Posts: 451
|
posted May 07, 2012 04:52 PM
quote:
quote:
A half second quicker, especially to the 1000' mark is tough to get when you're already running as quick as Lee is. Good luck in your quest. If you get it you're sure riding the heck out of the bike. That would make you somewhere in the neighborhood of a high 7.80 to low 7.90 bike in a 1/4 mile.
I'm not trying to take anything away from Lee but he doesn't have 48mm throttle bodies, a CNC head, or 80 shot of nos, that might help a little you think? lol
wee
Yes, those things will certainly help. But Lee is already going so quick and fast that it really gets hard to gain a half second at 1000' over what he's doing. Check out some high 7 second bikes and look at their 1000' incremental. See where I'm coming from????
____________
2009 Monster Edition ZX14
It's all stock I swear. Well...almost.
2005 Turbo Busa
2001 GSXR 1000
2003 Turbo GSXR 1000
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted May 07, 2012 06:10 PM
would those mods put a 14r at or over 300 hp?
wee
|
RICH CRAFT 1
Zone Head
Posts: 677
|
posted May 07, 2012 06:25 PM
60 Foot 1.09
330 Foot 3.14
660 Foot 4.94
660 MPH 137.55
1000 Foot 6.50
1/4 Mile ET 7.83
1/4 Mile MPH 169.19
and you can forget the 1.09 60 foot LOL these numbers come off the calculator 1.29 would be more reasonable. So probably a bike that run 760s would probably be a reasonable ET for a 6.50 thousand foot.
Ken
____________
Red 06 ZX14 RR
|
codyc_13
Expert Class
Posts: 340
|
posted May 07, 2012 06:31 PM
wouldnt you run alot more MPH than that with all the Mods listed?
____________
06 zx14, 65", lowered, muzzy pipe, pcIII, air shifter, Litz revalve, Adams cut seat, OSR cut pan 87 pump gas.
8.97 at 149mph
|
RICH CRAFT 1
Zone Head
Posts: 677
|
posted May 07, 2012 06:51 PM
quote:
wouldnt you run alot more MPH than that with all the Mods listed?
no, those are probably about the mph with a 80 shot and a175 pound rider. depending on what time a year you tried this, probably between 8.05 and 8.15 and you would need at least a 69 inch wingarm.
Ken
____________
Red 06 ZX14 RR
|
smokinstorm
Expert Class
Old Drag Racer
Posts: 451
|
posted May 07, 2012 06:51 PM
No, I don't think a lot more MPH. Maybe a little. 170-171 would be my guess. Remember the OP isn't a true lightweight so he's probably not going to run anywhere near what Lee runs on the motor.
____________
2009 Monster Edition ZX14
It's all stock I swear. Well...almost.
2005 Turbo Busa
2001 GSXR 1000
2003 Turbo GSXR 1000
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted May 07, 2012 07:04 PM
quikgix went 8.16@167 1.35 60ft, wonder what his 1000ft was?
wee
|
codyc_13
Expert Class
Posts: 340
|
posted May 07, 2012 07:05 PM
Interesting, Thanks.
____________
06 zx14, 65", lowered, muzzy pipe, pcIII, air shifter, Litz revalve, Adams cut seat, OSR cut pan 87 pump gas.
8.97 at 149mph
|
smokinstorm
Expert Class
Old Drag Racer
Posts: 451
|
posted May 07, 2012 07:15 PM
quote:
quikgix went 8.16@167 1.35 60ft, wonder what his 1000ft was?
wee
I hope he chimes in but I'd guess about 6.8.
____________
2009 Monster Edition ZX14
It's all stock I swear. Well...almost.
2005 Turbo Busa
2001 GSXR 1000
2003 Turbo GSXR 1000
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted May 07, 2012 07:17 PM
quote:
quote:
quikgix went 8.16@167 1.35 60ft, wonder what his 1000ft was?
wee
I hope he chimes in but I'd guess about 6.8.
is he stock motor and throttle bodies? just gas?
wee
|
codyc_13
Expert Class
Posts: 340
|
posted May 07, 2012 07:19 PM
I believe he has headwork, throttle bodies and a 75 shot of gas.
____________
06 zx14, 65", lowered, muzzy pipe, pcIII, air shifter, Litz revalve, Adams cut seat, OSR cut pan 87 pump gas.
8.97 at 149mph
|
BlackMagic14
Needs a job
Posts: 2007
|
posted May 07, 2012 08:30 PM
I for one do not think it would do it. My jockey thinks it will. I am thinking that setup will run 6.80's 1000 ft 8.00-8.19 1/4 mile. But I guess we will find out. Probably going to start ordering parts tomorrow. Will probably wind up getting a lightweight battery and some gale speed wheels. Then will start looking at some other cheap ways to save weight. Does the new bike have the 3 pound rubber mat over the motor? I guess I really need to start reading Shane's thread to get some ideas on weight savings. Also Lee (smokin) you gonna do any traveling this year? I would like to get you to make some passes once we get it set up to see what you can do on it.
|
BlackMagic14
Needs a job
Posts: 2007
|
posted May 07, 2012 08:31 PM
quote:
would those mods put a 14r at or over 300 hp?
wee
Wee
I estimating right at 290-300
|
BlackMagic14
Needs a job
Posts: 2007
|
posted May 07, 2012 08:32 PM
I for one do not think it would do it. My jockey thinks it will. I am thinking that setup will run 6.80's 1000 ft 8.00-8.19 1/4 mile. But I guess we will find out. Probably going to start ordering parts tomorrow. Will probably wind up getting a lightweight battery and some gale speed wheels. Then will start looking at some other cheap ways to save weight. Does the new bike have the 3 pound rubber mat over the motor? I guess I really need to start reading Shane's thread to get some ideas on weight savings. Also Lee (smokin) you gonna do any traveling this year? I would like to get you to make some passes once we get it set up to see what you can do on it.
|
quikgix
Expert Class
Posts: 245
|
posted May 07, 2012 10:16 PM
My bike went 6.83 at 1000' on my 8.16 pass
____________
Kicks Ass When All Systems Are Kicked In
|
quick6
Expert Class
Posts: 236
|
posted May 07, 2012 11:14 PM
looked at my 1/4 mile tickets. wouldn't you know it. no 1000 ft. timers. just curious as whats the fastest anyone here has been on a bike?
____________
2006 zx14, fully dressed and sliding(Charlie Sheen)
|
JZX
Zone Head
Posts: 936
|
posted May 08, 2012 12:13 AM
RG's RST bike probably got damn close to 6.50 1000', but he trapped 197 mph with all the dope that's on that bike.
Not really an apples to apples being shorter wheelbase and a 1570 or bigger with 200hp of spray.
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
kawa74
Expert Class
Posts: 225
|
posted May 08, 2012 11:25 AM
June 5/11
Leonidas ZX-14,.....Featherweight...... Turbo by Chris Jones......Qrient Express clutch
1.36 @ 60
3.534
5.18 @ 149.56
6.563
7.747 @ 183.52
____________
"I have never met a man so Ignorant that I coun't Learn from him"..."Galileo"
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted May 08, 2012 11:42 AM
quote:
June 5/11
Leonidas ZX-14,.....Featherweight...... Turbo by Chris Jones......Qrient Express clutch
1.36 @ 60
3.534
5.18 @ 149.56
6.563
7.747 @ 183.52
and how much hp on the back half?
|
01smokes
Needs a job
Posts: 2231
|
posted May 08, 2012 03:47 PM
quote:
quote:
June 5/11
Leonidas ZX-14,.....Featherweight...... Turbo by Chris Jones......Qrient Express clutch
1.36 @ 60
3.534
5.18 @ 149.56
6.563
7.747 @ 183.52
and how much hp on the back half?
Over 400 is my guess lol. Didn't that bike trap in the mid 190s??
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
zx13r
Expert Class
Capt-America
Posts: 175
|
posted May 09, 2012 07:44 PM
You going to try and break the track record at cville?
____________
Sposored By:
Kawasaki Sports Center
ShoTime Graphics.com
|
|
|
| Quick Reply: |
|
HOME
NEW TOPIC