HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: ZX14r Fairing Removal NEW TOPIC NEW POLL POST REPLY
Wheelie


Needs a life
Old Man
Posts: 6902
posted November 25, 2011 08:30 AM        Edited By: Wheelie on 25 Nov 2011 23:37
ZX14r Fairing Removal

Remove the foreman grills first, remove the three bolts, the one in the middle you need to separate it from the grill after taking it out, pull out on the lower rear, then the grills slide straight back towards the rear.




Next remove the lowers. There is one bolt behind the grills you need to remove so you can pull the lowers out to get a allen wrench and phillips scew out behind the lowers, it's a little difficult, use a flash light to see behind them, the the lower removes like a Gen I. Or you can leave them on.



Remove the push rivets



Remove the dash panels, lift up the back part. The fairings will slide straight back to the rider to remove.



if you need further assistance post up or pm me.

wee

  Ignore this member   
02zx12rbob


Expert Class
Posts: 496
posted November 25, 2011 08:50 AM        
Damm, that bike looks great already !
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
posted November 25, 2011 08:52 AM        
Bob, call me

wee

  Ignore this member   
Shane661


Needs a life
Posts: 11494
posted November 25, 2011 09:11 AM        
Thanks Wee!
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
posted November 25, 2011 09:12 AM        
quote:
Thanks Wee!
you're welcome

wee


  Ignore this member   
JZX


Zone Head
Posts: 943
posted November 25, 2011 09:17 AM        
Wee, did you measure the OD of the M14 head pipes?
____________
06 ZX14 65"

Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'


  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
posted November 25, 2011 11:49 AM        
quote:
Wee, did you measure the OD of the M14 head pipes?
no

wee

  Ignore this member   
LAB3


Needs a job
Posts: 2977
posted November 26, 2011 03:28 AM        Edited By: LAB3 on 26 Nov 2011 19:03
Wee with a Muzzy ???? Brocks Police is looking for a new leader :-)


  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
posted November 26, 2011 05:40 AM        
quote:
Wee with a Muzzy ???? Brocks Police is looking for a new leader :-)


HEHE

wee

  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7224
posted November 26, 2011 08:28 AM        
Very nice! do you need to shim the rad out for the Muzzy pipe?
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos

  Ignore this member   
01smokes


Needs a job
Posts: 2243
posted November 26, 2011 08:38 AM        
I sure do like them stock wheels!!
____________
PayPal, vigilart22@yahoo.com

Email, artvgl@yahoo.com

  Ignore this member   
JZX


Zone Head
Posts: 943
posted November 26, 2011 09:30 AM        
quote:
Wee with a Muzzy ???? Brocks Police is looking for a new leader :-)




Ya'll can right me the ticket :-)
____________
06 ZX14 65"

Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'


  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
posted December 03, 2011 06:55 AM        
well I've taken the fairings of a couple of times, it's very easy, no need to take the lowers off, just leave them on and remove the side fairings in one piece.

wee

  Ignore this member   
TH1RT3EN


Zone Head
Trial And Error Control
Posts: 722
posted April 01, 2012 11:14 AM        
Thanks for the write up Wee! Made things very simple for the first removal.

Patrick
____________
There is a fine line between Fear and Respect

When I was a kid i used to........... Wait I Still Do That!

  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
posted April 01, 2012 01:32 PM        
quote:
Thanks for the write up Wee! Made things very simple for the first removal.

Patrick
I also posted it's easier to leave the lowers on when removing side fairings, glad that helped.

wee

  Ignore this member   
JP ZX 14 R SE


Parking Attendant
JP
Posts: 1
posted April 06, 2012 04:24 PM        
Great tech support, I got the factory manual and it's useless
thank's
Jpzx 14 R SE
____________
JP ZX 14 R SE

  Ignore this member     
venomous_zx


Expert Class
2012 14r - low and long-
Posts: 321
posted April 06, 2012 11:37 PM        
Digging the muzzys wee!
____________
sensei

  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: ZX14r Fairing Removal NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2015 Bikeland Media
Please refer to our terms of service for further information
0.26938796043396 seconds processing time