Fifty Thousand
Expert Class
Lovin My Family.
Posts: 204
|
posted January 03, 2010 09:14 AM
Looking for zx10/zx14 front fender brackets
Looking to buy a set of the brackets to put the zx10 front fender on my 07 zx14. ANyone got any?
____________
  
|
JDC
Zone Head
Posts: 570
|
posted January 03, 2010 09:37 AM
check with dubvious
|
Shane661
Needs a life
Posts: 11494
|
posted January 03, 2010 09:38 AM
http://www.bikeland.org/board/viewthread.php?FID=16&TID=46835&set_time=
|
LAB3
Needs a job
Posts: 2977
|
posted January 03, 2010 12:05 PM
They work and fit perfect. Thanks Lyle :-)
Louis
|
zx-twitch
Expert Class
the dude abides
Posts: 247
|
posted January 03, 2010 06:38 PM
noting but good things to say about mine. Lyle is the man
|
Fifty Thousand
Expert Class
Lovin My Family.
Posts: 204
|
posted January 04, 2010 03:42 PM
Thanks for the link guys> Now once I find a carbon fender I can out it on..........
____________
|
zx-twitch
Expert Class
the dude abides
Posts: 247
|
posted January 04, 2010 04:07 PM
hold one link coming shortly
|
zx-twitch
Expert Class
the dude abides
Posts: 247
|
posted January 04, 2010 04:17 PM
here is the link to the bestem carbon fiber on ebay. there the best quality out there and what most of us are using.
http://cgi.ebay.com/ebaymotors/Kawasaki-05-06-ZX10R-ZX6R-Carbon-Fiber-Front-Fender-K3_W0QQcmdZViewItemQQhashZitem2eaa233e97QQitemZ200422932119QQptZMotorcyclesQ5fPartsQ5fAccessories#ht_1215wt_716
|
epd345
Pro
Posts: 1494
|
posted January 04, 2010 05:37 PM
Check out Bestem's website also, some of the stuff is actually cheaper on their website because they don't have to pay ebay fees. So far I have their ZX-10 CF fender and CF hugger along with the fiberglass undertail. For the moeny you can't beat it, Heres the link
http://www.bestemusa.com/index.php?cPath=6_99
____________
2012 ZX14, Ceramic Coated Brock's CT Meg, PCV, throttlemeister
|
zx14drew
Parking Attendant
Posts: 8
|
posted November 13, 2010 07:47 AM
Guys, Dubious no longer manuf and sells the front fender bracket, anyone know of another source? Thanks!
Drew
____________
Drew
636 Race
ZX14 Commute
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted November 13, 2010 07:57 AM
i am going to get with my local guy about possibly making and selling these brackets.
If i have any luck i will let you know.
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
jlewis02
Expert Class
Posts: 195
|
posted November 13, 2010 08:06 AM
 Edited By: jlewis02 on 13 Nov 2010 16:09
I am also wanting some brackets
What year ZX10 fender do I need to order when I find some brackets?
____________
08 ZX14
1.57 60'
6.09@124
9.24@155
SWB 5400ft DA 50hp shot
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted November 13, 2010 08:25 AM
it depends on what i give the guy as a reference. I purchased an 07 fender. i am planning on getting with him this week coming up and i will see what he thinks. I will let you guys know.
If you want to give the guy a call and put a bug in his ear go ahead....
Justin
985-637-8234
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
zx14drew
Parking Attendant
Posts: 8
|
posted November 13, 2010 08:42 AM
Thanks, looks like there are a few of us that need em...not enough to get Dubious to cut up another set (he would need 10+ orders I believe), but perhaps he can assist with our local metal shop folks in cutting up individual sets.
Anyways, if anyone gets any info I'm in!
____________
Drew
636 Race
ZX14 Commute
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted November 13, 2010 09:30 AM
I just spoke with Justin,
I will be taking him my bike and the 07 zx10 fender i purchased sometime next week. (i am still waiting for it to be shipped to me). As soon as i get it to him he said it may take him a few days to get things mocked up and make a set of brackets.
My main question is what is the difference between the 07 and previous years zx10 fenders and 08 and newer. If i could get an 08 or newer zx10 fender i could take it to him as well so he could make a bracket that could incorporate all years. If i can not get one than it looks like the brackets would only work for 07 and prior years like the ones that DUBIOUS used to make.
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
DogoZX
Expert Class
Posts: 348
|
posted November 13, 2010 10:53 AM
quote:
If i could get an 08 or newer zx10 fender i could take it to him as well so he could make a bracket that could incorporate all years.
This guy just modified the factory zx14 brackets to mount up a gen3 10r fender.
http://www.zx14ninjaforum.com/messages.cfm?threadid=F44C3B0A-1372-66AE-3BDDBC82FB0AF775&page=1&searchTerm=zx10 fender#1
|
zx14drew
Parking Attendant
Posts: 8
|
posted November 13, 2010 10:59 AM
Sounds good, I'm down in FL. Btw, I just mounted my 2005 636 fender to my ZX14 using the two upper mount points, the Kawi 6R and ZX10 fenders are said to be the same, one thing I noted immediately was the fender is too far forward using the upper Z14 mount points, it's not "near flush" with the forks as seen on the posted pictures here using Dubious bracket, instead its 1/2 - 3/4 inch forward and showing all the normally hidden fender mounting hardware. Just FYI, could be this shark skins 2005 636 fender, may not be identical to the 2007 ZX10.
I was planning on going with Bestem C/F 2007 ZX10 fender, its cheaper than OEM at $112.00...
____________
Drew
636 Race
ZX14 Commute
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted November 13, 2010 01:44 PM
Edited By: dubious on 13 Nov 2010 21:46
If 10 guys want em, I will make another batch of 10. I prefer 20 though.
20 would be cheaper. I would consider making them and selling them all to one person as well.
I'm really not into selling the stuff anymore or the headaches.
It wont happen right away though.
would be ready before xmas.
LMK when you have 10 , or if someone wants bulk order.
they would be cut with a water jet again like the last ones.
Very clean and production like.
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
LAB3
Needs a job
Posts: 2977
|
posted November 13, 2010 02:07 PM
Edited By: LAB3 on 13 Nov 2010 22:32
I have a set of the water jet brackets from Lyle (lastest design) they fit perfect. I have a Bestem Carbon ZX-10 fender. Looks cool on balck 14. I forgot what year model fender I ordered. One thing the ZX-10 fender DOES do is cool off the the radiator when you are caught in stop and go traffic. Cools down the engine MUCH quicker when you get rolling.
Louis
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted November 14, 2010 05:20 AM
if you use a pickup truck to transport the bike, the stock fender will get squashed between the bed and the tire.as, well you need to remove the frotn tire to remove the stock front fender
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted November 27, 2010 09:55 PM
Edited By: TH1RT3EN on 28 Nov 2010 06:19
Fender Brackets are in stock and ready to be shipped out!!!
I visited Justin a few days ago and checked out the brackets and they look awesome!
The brackets he made fit the 06 & 07 zx10 fender, They were also made with 2 mounting locations. He made them to fit with a stock 70 series tire, and a lower mounting hole for guys running a 60 series tire. It should help with clearance for those looking to drop the front as low as they can possibly go. Also the front tire was not removed during this process. I was able to remove the stock fender fairly easily as it is only held on with 4 bolts and 2 clamp rings that snap into the fender to hold the brake line that goes over to the left side. The clamp rings can be re-used in the zx10 fender that i am using.
If you interested give him a call. The brackets come with a set of bolts and locking nuts to mount them to the forks. Then all you need to use is the stock 4 bolts from the 14 fender to mount the zx10 fender.
I can not remember an exact price so you will have to give him a call and find out.
Justin
985-637-8234
Here is a few pics i snapped with my phone...
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
zx14drew
Parking Attendant
Posts: 8
|
posted December 01, 2010 08:44 AM
Just left a message with Justin, will order...thanks!
Drew
____________
Drew
636 Race
ZX14 Commute
|
KneeScraper
Parking Attendant
Posts: 27
|
posted August 02, 2011 08:25 AM
Edited By: KneeScraper on 2 Aug 2011 16:26
I am looking on Bestem's website. They list a 2004 through 2007 ZX10 front fender and then a different fender for Bestem's 2008 through 2010 ZX10 front fender.
http://www.bestemusa.com/product_info.php?cPath=97&products_id=460&CDpath=1
I am guessing these brackets fit a 2004 through a 2007 ZX10 front fender, correct? I'm looking to make this mod and just wanted to be sure I bought the correct year of front fender to go with these brackets.
____________
CCS Expert #43 Mid-Atlantic Region
WERA Expert #43 Mid-Atlantic Region & Northeast Region
2010 WERA Senior SuperBike MW Novice Mid-Atlantic Champion
2010 WERA Senior SuperBike MW Novice Northeast Champion
Track Coach - Roger Lyle's MotorcycleXcitement
http://www.motorcyclexcitement.com/
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted August 02, 2011 09:23 AM
Yes 04-08 are the same and will work with the brackets.
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted August 02, 2011 02:04 PM
hope you dont mind if I help ,
the zx10 fender, and mounting holes changed in 08 up
04-07 zx10 are the same, as were the 04-06 zx6 and 636
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
|
|
HOME
NEW TOPIC