Fastest-14
Expert Class
Fastest -14
Posts: 354
|
posted August 25, 2009 05:17 PM
Who had the Flat Oil Drain Plugs
A couple months ago there were a couple guys with the flat oil drain plugs with the Hex head. One fellow was sending them out free and there was another fellow who was selling a slightly flatter version, 2 for $10.00. Can someone let me know who they are and are the plugs still avail?
  
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted August 25, 2009 05:20 PM
I'd like one as well. Don't let 14nooby send ya one!!! He send emply letters! 
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Newf14
Zone Head
2007 ZX1400
Posts: 563
|
posted August 25, 2009 06:10 PM
I think I have a spare one and about 20 crush washers....Helps to know the guy who work at honda in the parts department here.
Newf14
|
kawasakijockey
Pro
Posts: 1876
|
posted August 25, 2009 06:44 PM
Call a hydralic shop for one. It is a DIN 908 12mm.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted August 25, 2009 06:55 PM
This might be a really dumb question but what material does the bolt need to be made of? A reg bolt or stainless?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
ZX11D
Zone Head
Internet Police
Posts: 674
|
posted August 25, 2009 08:21 PM
 Edited By: ZX11D on 26 Aug 2009 04:22
Hey Jockey, thanks for the info 
Eklipse, yes, they are available in SS.
____________
'94 ZX-11
'07 ZX-14
|
AcadianaZX
Advertiser
Posts: 530
|
posted August 25, 2009 10:38 PM
I also have some. Had to buy a bag of them as a minimum order. Didn't even use any. My daughters husband machined the existing oil pan plug flat and made the allen head in it. If anyone needs any more give us a yell. I would just require shipping cost.
James
|
epd345
Pro
Posts: 1494
|
posted August 26, 2009 02:07 AM
James I will take one of those flat plugs and a case of spamsoil 10w40 m/c synth. How much deivered to CT? email me at epd345@yahoo.com. Joe
____________
2012 ZX14, Ceramic Coated Brock's CT Meg, PCV, throttlemeister
|
AcadianaZX
Advertiser
Posts: 530
|
posted August 26, 2009 03:48 AM
quote:
James I will take one of those flat plugs and a case of spamsoil 10w40 m/c synth. How much deivered to CT? email me at epd345@yahoo.com. Joe
You got it. As soon as I speak to the Boss this morning she will get with you.
|
Shane661
Needs a life
Posts: 11494
|
posted August 26, 2009 03:56 AM
quote:
I also have some. Had to buy a bag of them as a minimum order. Didn't even use any. My daughters husband machined the existing oil pan plug flat and made the allen head in it. If anyone needs any more give us a yell. I would just require shipping cost.
James
Hey, you're cutting into my business! 
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted August 26, 2009 03:56 AM
Acadianazx ill take a bolt! Can you shoot me a email eklipse636@hotmail.com thanks!
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
AcadianaZX
Advertiser
Posts: 530
|
posted August 26, 2009 05:41 AM
quote:
quote:
I also have some. Had to buy a bag of them as a minimum order. Didn't even use any. My daughters husband machined the existing oil pan plug flat and made the allen head in it. If anyone needs any more give us a yell. I would just require shipping cost.
James
Hey, you're cutting into my business!
OOps! Sorry Shane. That is true. You take from here if they don't mind.
|
Shane661
Needs a life
Posts: 11494
|
posted August 26, 2009 05:59 AM
quote:
quote:
quote:
I also have some. Had to buy a bag of them as a minimum order. Didn't even use any. My daughters husband machined the existing oil pan plug flat and made the allen head in it. If anyone needs any more give us a yell. I would just require shipping cost.
James
Hey, you're cutting into my business!
OOps! Sorry Shane. That is true. You take from here if they don't mind.
No, by all means, give them to whoever needs them until you run out!
I just bought too many to give them away...
|
AcadianaZX
Advertiser
Posts: 530
|
posted August 26, 2009 06:39 AM
you got it Shane. Thanks
|
Fastest-14
Expert Class
Fastest -14
Posts: 354
|
posted August 26, 2009 07:29 AM
quote:
quote:
I also have some. Had to buy a bag of them as a minimum order. Didn't even use any. My daughters husband machined the existing oil pan plug flat and made the allen head in it. If anyone needs any more give us a yell. I would just require shipping cost.
James
Hey, you're cutting into my business!
Hey Shane u have a pix of your plug that u can e-mail me? (fastest14@yahoo.com). Whats the cost?
|
Shane661
Needs a life
Posts: 11494
|
posted August 26, 2009 07:31 AM
Edited By: Shane661 on 26 Aug 2009 15:38
quote:
quote:
quote:
I also have some. Had to buy a bag of them as a minimum order. Didn't even use any. My daughters husband machined the existing oil pan plug flat and made the allen head in it. If anyone needs any more give us a yell. I would just require shipping cost.
James
Hey, you're cutting into my business!
Hey Shane u have a pix of your plug that u can e-mail me? (fastest14@yahoo.com). Whats the cost?
http://www.bikeland.org/board/viewthread.php?FID=27&TID=40269&pagenumber=31
$3 each, + $3 SH & Paypal for up to 5 plugs.
EDIT: Minimum order, 2 plugs.
Shane
|
WindSwordNinja
Expert Class
Posts: 203
|
posted August 26, 2009 07:41 AM
Hey AcadianaZX would you please send me an email using my handle name @gmail.com
Thanks
____________
2014 ZX14 Black and Green
2008 ZX14 Black and Red SE
1986 ZX1000R Black
"Faster, faster! Faster would be better!" (Serenity)
|
KLD
Novice Class
Posts: 51
|
posted August 26, 2009 11:59 AM
If you have any spares ill take one. My email - kcopperman@hotmail.com
|
Fastest-14
Expert Class
Fastest -14
Posts: 354
|
posted August 26, 2009 01:35 PM
http://www.bikeland.org/board/viewthread.php?FID=27&TID=40269&pagenumber=31
$3 each, + $3 SH & Paypal for up to 5 plugs.
EDIT: Minimum order, 2 plugs.
Shane
Great pictures Shane. I appreciate that. How is this plug holding up on your bike and have you had any leaks? Any reason y you're selling them with 2 being the minimum when one is all we need and are the crush washers sent with them?
|
Shane661
Needs a life
Posts: 11494
|
posted August 26, 2009 01:44 PM
Edited By: Shane661 on 26 Aug 2009 21:45
quote:
http://www.bikeland.org/board/viewthread.php?FID=27&TID=40269&pagenumber=31
$3 each, + $3 SH & Paypal for up to 5 plugs.
EDIT: Minimum order, 2 plugs.
Shane
Any reason y you're selling them with 2 being the minimum when one is all we need and are the crush washers sent with them?
Yes, because I don't have time to fill 100 orders, packing and delivering them to the post office, for $1.25 of "profit" each. I can sell you a single bolt for $9 shipped, if you prefer. 
Perhaps Arcadian has some free ones left. If not, you can get them cheaper than $3 if you order a minimum amount (whatever the supplier requires). I don't have any washers.
I'm glad you found my information and pictures useful.
Shane
|
CajunBoyz
Zone Head
Posts: 702
|
posted August 26, 2009 01:48 PM
I had bought some from Shane661, He was great & fast service.
____________
"Cajun Boyz with Bad Ass Toys"
|
Fastest-14
Expert Class
Fastest -14
Posts: 354
|
posted August 26, 2009 01:54 PM
Shane, how is this plug holding up on your bike and have you had any leaks?
|
Fastest-14
Expert Class
Fastest -14
Posts: 354
|
posted August 26, 2009 01:58 PM
quote:
I also have some. Had to buy a bag of them as a minimum order. Didn't even use any. My daughters husband machined the existing oil pan plug flat and made the allen head in it. If anyone needs any more give us a yell. I would just require shipping cost.
James, I'd like to check out what you have. Tell me what I need to do?
|
joemugg
Expert Class
Posts: 109
|
posted August 26, 2009 01:59 PM
Acadiana, if you have any left send me an email at my name @earthlink.net
Shane, if he doesn't I want one of yours. How can I get you paid?
____________
'06 ZX14 blue, Muzzy M14/M10, flies out, BMC filter, PCIII, SpeedoHealer, Scott's Steering Damper, 16 tooth Vortex
'97 GSXR600 street sweeper
|
Shane661
Needs a life
Posts: 11494
|
posted August 26, 2009 03:15 PM
quote:
Shane, if he doesn't I want one of yours. How can I get you paid?
I'm sorry, man. I've retired from the bolt business for the time being.
Too many hours of tech support, lol.
Shane
|
|
|
HOME
NEW TOPIC