HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: Dyna shift minder and muzzy air shifter ?? NEW TOPIC NEW POLL POST REPLY
smokinzx14


Needs a life
Posts: 10197
posted April 30, 2007 12:28 PM        
Dyna shift minder and muzzy air shifter ??

As most of you guys and gals know i have a Muzzy c02 air shifter and i just picked up a Dyna shift minder with shift light from one of the zx14 members.... The shift minder has a 12 volt RPM output that can be used to trigger the air shifter ..The Muzzy air shifter has a digakill box that kills the fuel as well as adj kill time and delay time....My question is what wire would i use from the Digakill to make it an auto shift .....Anyone done this set up before?? Can it be done with a diga kill box ? Thanks Smokin..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
lietoome


Needs a job
Posts: 2033
posted April 30, 2007 12:49 PM        
I'll have the identical setup, please keep us posted.
  Ignore this member   
smokinzx14


Needs a life
Posts: 10197
posted April 30, 2007 12:53 PM        
quote:
I'll have the identical setup, please keep us posted.
I will if i can get it working without burning up all my parts ...lol...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
zx12mark


Pro
Posts: 1649
posted April 30, 2007 02:19 PM        
use the wire that flashes the shiftlite to trigger the wire going out of the push button that activates the shifter.
you might have to invert a positive pulse to negitive or vise versa.use an relay.
what ever rpm the shiftlite flashes it will auto shift

  Ignore this member    Click here to visit zx12mark's homepage. 
dubious


Needs a life
Needs more time to ride!
Posts: 8442
posted May 01, 2007 12:40 AM        Edited By: dubious on 1 May 2007 07:41
If all else fails...
Hook it to the power wire on your shift light, when light goes on, bike should shift!

____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.

  Ignore this member   
burnout


Expert Class
Posts: 216
posted May 01, 2007 01:33 AM        
quote:
use the wire that flashes the shiftlite to trigger the wire going out of the push button that activates the shifter.
you might have to invert a positive pulse to negitive or vise versa.use an relay.
what ever rpm the shiftlite flashes it will auto shift



I agree. Your going to have to fire both the solenoid and the DigiKill, which one of the wires on the long Muzzys harness already does when the horn button is pressed. If you can isolate the wire that becomes hot when the horn button is pressed, you should be able to fire that with the shift light lead.
____________
1/8 5.66@129.77
1/4 8.74@159.60

  Ignore this member   
zxbob


Pro
Posts: 1692
posted May 02, 2007 09:39 PM        
Hmmm ..... no reply from Lee ..... he's work'in on it

Bob

  Ignore this member   
burnout


Expert Class
Posts: 216
posted May 02, 2007 10:31 PM        
I read in another of his posts that he became concerned that if he spun the tach relay may cause him to bang through the gears all at once and mess up his tranny. I've been thinking about it, however, and Muzzy puts in protection for "button bounce", which should prevent this.

Adams Performance goes about it a little differently. I think they have an autoshift unit that has a time delay in addition to the RPM window.

I'm wondering if the PCIII hub relay might be the way to go. Couldn't you use gear position and RPM in order to limit relay firing more than once per gear.
____________
1/8 5.66@129.77
1/4 8.74@159.60

  Ignore this member   
smokinzx14


Needs a life
Posts: 10197
posted May 03, 2007 02:17 AM        
Well i'm going to set back and watch someone else be the tester for this one ... For now i'm just going to use it as a shift light ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
CajunBoyz


Zone Head
Posts: 701
posted March 27, 2012 10:32 AM        
quote:
Well i'm going to set back and watch someone else be the tester for this one ... For now i'm just going to use it as a shift light ...


Smokin, did you ever use this dyna shift minder as a shift light???
____________
"Cajun Boyz with Bad Ass Toys"

  Ignore this member   
CajunBoyz


Zone Head
Posts: 701
posted March 27, 2012 09:48 PM        
Bump for Smokin ??
I saw in another thread you had just tied into the #1 coil & I bleieve it worked??? I know CRS is a mother, but see if you remeber any of this.. Thanks
____________
"Cajun Boyz with Bad Ass Toys"

  Ignore this member   
AcadianaZX


Advertiser
Posts: 530
posted March 27, 2012 11:10 PM        
Hey Lee, I'm using the Schnitz TPRS to trigger my Digi kill.
With relay. 85 +12, 86 grd, 30 grd, 87 -12 to Digi kill green, 87a nothing.

James

  Ignore this member   
AcadianaZX


Advertiser
Posts: 530
posted March 28, 2012 11:42 AM        
Lee, you can call me if I need to explain better. With the relay I'm grounding the green wire at the left handle bar. If the shift minder is putting out 12v it should work fine. I previously tried to trigger it at the horn switch with no results. 337-654-1663

James

  Ignore this member   
smokinZX14


Needs a life
Posts: 10197
posted March 28, 2012 11:47 AM        
quote:
Lee, you can call me if I need to explain better. With the relay I'm grounding the green wire at the left handle bar. If the shift minder is putting out 12v it should work fine. I previously tried to trigger it at the horn switch with no results. 337-654-1663

James
wow this is so old i have no clue what anyone is talking about ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
smokinZX14


Needs a life
Posts: 10197
posted March 28, 2012 11:51 AM        
Man this is old stuff all the way back to my 06 zx14 ... I never did get the shift light to work as an auto shift , not sure i ever even tried to hook it up that way .. The shift light never did help me because i never could see it no matter where i put it ..
What i'm ising now is MPS auto shift box set at 11k ... It works great and no need for a shift light that i can't see anyway .. hope that helps ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
AcadianaZX


Advertiser
Posts: 530
posted March 28, 2012 11:52 AM        
Got me good. Now that u mention it, I see it was way back.
  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: Dyna shift minder and muzzy air shifter ?? NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2015 Bikeland Media
Please refer to our terms of service for further information
0.45875215530396 seconds processing time