HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: Power Commander ??? ZX-10 or ZX-14 NEW TOPIC NEW POLL POST REPLY
jetman2


Parking Attendant
Posts: 25
posted September 25, 2006 01:19 PM        
Power Commander ??? ZX-10 or ZX-14

I found a local dealer with a PCIII for the ZX-14 but have questions whether it's the re-pinned version of the ZX-10 or a true "made for ZX-14" unit. The package reads out the true part number and description of 224-411 and reads ZX-14 on the package BUT the sticker on the unit says it is a 221-410... Is this one of the infamous re-pinned units ???

It's not a "MAJOR" deal, just want to be sure what I'm possibly buying.
____________
Black 2006 ZX-14

  Ignore this member   
TeamSpeed


Expert Class
Posts: 449
posted September 25, 2006 01:26 PM        
#411 is the internals and cabling for the ZX14. You have a ZX14 unit.
  Ignore this member   
jetman2


Parking Attendant
Posts: 25
posted September 25, 2006 02:01 PM        
I'm really not trying to be a pain but are you SURE ???

I have a friend that has had some issues with his and his is stickered 224-410 and in fact IS a re-pinned unit.

224-411 is on the PACKAGE NOT the PC itself...

the sticker on the PC itself says 224-410
____________
Black 2006 ZX-14

  Ignore this member   
TeamSpeed


Expert Class
Posts: 449
posted September 25, 2006 02:20 PM        
Yes, the 224-410 is the power commander by itself, the 224-411 is the kit.

see this post

http://www.zx14ninja.com/phpbb2/viewtopic.php?t=1806&highlight=224410

  Ignore this member   
jetman2


Parking Attendant
Posts: 25
posted September 25, 2006 03:23 PM        
Thanks TONS for enlightening me. I just wanted to be sure... MUCH appreciated
____________
Black 2006 ZX-14

  Ignore this member   
jscarb2


Expert Class
J&S RACING & PERFORMANCE
Posts: 176
posted October 03, 2006 06:14 PM        
my sticker says 222-411 which is for a 2006 zx10r, the map it came with was for a zx10r stock pipe and filter. (224-411 is for the zx14) is this going to hurt my bike? i loaded a zx14 map it works and runs any ideas?
  Ignore this member   
swft


Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted October 03, 2006 06:34 PM        
No problem with that, should be fine
  Ignore this member   
zx1kr


Pro
Posts: 1301
posted October 03, 2006 06:45 PM        
Hey, I have a ?
Will a 2006 ZX10 PC thats installed in a ZX14 work with a ZX14 Ignition module or a 2006 ZX10 ign. module?????
____________

  Ignore this member   
swft


Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted October 03, 2006 06:49 PM        
good question! i'd ask dynojet!
  Ignore this member   
jscarb2


Expert Class
J&S RACING & PERFORMANCE
Posts: 176
posted October 03, 2006 06:49 PM        
i want to make sure the ign. mod and the soon to be map selector switch will work as well
  Ignore this member   
BlackMagic14


Needs a job
Posts: 2058
posted October 03, 2006 06:49 PM        
the ZX14 ignition module should work the ZX10 will not... this is what I have been told anyway but I would wait for verification from Brock or someone who would know for sure
  Ignore this member   
ZXLNT


Needs a job
Kawpuke Extraordinare
Posts: 2853
posted October 03, 2006 07:45 PM        
ZX1KR it should work with either, as the expansion port on the PC's should be the same.

Did you get my PM on the Shifter Button?

  Ignore this member   
swiftkart


Expert Class
Posts: 349
posted October 04, 2006 06:50 AM        
The zx14 ignition module will work with the zx14 pc only, that's one of the reasons they are taking so long to release it, it will come with new software that has to be downloaded into the zx14 box to make it work, all of us zx14 pc owners got the ignition module install instruction with our pc's stating it will need to be upgraded for the ign. mod. to work, I'm pretty sure this was done because of sells of the zx10r pc that were installed on 14's, it's their way of getting back.
____________
2006 ZX14, Brock CT-Meg, PC, ignition module, E85, 214 lbs suited, 8.96@152.32 1.46 60'

  Ignore this member   
zxlnt


Needs a job
Kawpuke Extraordinare
Posts: 2853
posted October 04, 2006 08:52 PM        
A couple of weeks ago there was a ZX14 ignition module for sale on ebay. 175 dollars. Seemed pretty cheap to me..
  Ignore this member   
swiftkart


Expert Class
Posts: 349
posted October 05, 2006 04:14 AM        Edited By: swiftkart on 5 Oct 2006 05:15
They haven't released them yet, only 1 test unit has been made for the guy who gave them a 14 to make the pc/module for so it's either his or someones junk they tried to make work from another bike.
____________
2006 ZX14, Brock CT-Meg, PC, ignition module, E85, 214 lbs suited, 8.96@152.32 1.46 60'

  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: Power Commander ??? ZX-10 or ZX-14 NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2023 Bikeland Media
Please refer to our terms of service for further information
0.2139298915863 seconds processing time