FlatoutBu
Pro
Posts: 1054
|
posted December 16, 2005 06:16 PM
zx 14 exhaust..
I was just reading through a new motor mag and seen where they done a shootout between 7 different exhaust on a gsxr 1000. I thought it was interesting that the TiForce made the most HP and was almost the lightest. I wonder who's going to be first on the bandwagon with a full exhaust for the 14?
____________
06 Blue 14
9.008 at 153mph @ 195 suited
|
dougmeyer
Needs a job
moderated
Posts: 2713
|
posted December 16, 2005 07:27 PM
Anyone want to bet on that one?
|
osti33
Needs a job
Posts: 2973
|
posted December 16, 2005 07:30 PM
Edited By: osti33 on 16 Dec 2005 19:32
quote: Anyone want to bet on that one?
*Raising hand*
Pick me! Pick me!
I'll go out a limb here and say Muzzy.
|
Farmer Rog
Novice Class
Posts: 92
|
posted December 18, 2005 08:17 AM
I know Rob won't admit it, but my sources tell me he's had the motor for awhile (hp 183), and now has a whole bike (hp 172rwhp stock). Certainly plausible numbers. Should translate to 185-190 with a Muzzy pipe.....
Again, just rumors until Rob speaks up.....
____________
ZX-12R, stock motor, Muzzy/PC3 63in, 60-shot dry, 750#, 9.001
ZX-14, stock motor, Brock smeg/PC3, 63.5in, ~750#, 9.31 NA, 8.95 40-shot dry.
NorthwestDragbike.com
|
Farmer Rog
Novice Class
Posts: 92
|
posted January 04, 2006 10:52 AM
Edited By: Farmer Rog on 10 Jan 2006 08:33
Just rumors........
____________
ZX-12R, stock motor, Muzzy/PC3 63in, 60-shot dry, 750#, 9.001
ZX-14, stock motor, Brock smeg/PC3, 63.5in, ~750#, 9.31 NA, 8.95 40-shot dry.
NorthwestDragbike.com
|
fullzx12r
Zone Head
French Guy
Posts: 864
|
posted January 04, 2006 11:08 AM
farmer, you must go do PICSSSSSSSSSSSSSSSS
loll ))
____________
zx-12r 01'
zzr 1400 06'
hayabusa 08'
zzr 1400 12'
|
k bryant
Needs a job
Sponsor
Posts: 2911
|
posted January 04, 2006 11:20 AM
As Doug knows, it's always a big risk making tooling from a pilot production bike. We've all been burned on that at one time or another (ie: bracket location change).
Just like on the 10, the '06 had a bracket change from pilot to pre-production. So depending on how you designed the exhaust, it could be a fitment problem.
All that being said, I would definetly bet that Muzzy will be one of the first in a box.
|
trenace
Needs a job
Posts: 3056
|
posted January 04, 2006 11:54 AM
Edited By: trenace on 4 Jan 2006 11:56
quote: I know Rob won't admit it, but my sources tell me he's had the motor for awhile (hp 183), and now has a whole bike (hp 172rwhp stock). Certainly plausible numbers. Should translate to 185-190 with a Muzzy pipe.....
Again, just rumors until Rob speaks up.....
Well, let's hope that that's not right, because Muzzy's -- on their site anyway -- gives STD figures not SAE, and further some would say their dyno seems a little high-reading compared to some others and perhaps compared to average. So rather than looking at the pure number, ya gotta look at how it compares to other runs on the same dyno.
Muzzy's gives 163 hp for the stock ZX-12R, and accordingly 172 stock on their dyno would be only a 9 hp increase: though that is not an unreasonable possibility for the increase whatsoever, indeed Kawasaki has mentioned only 8 hp, still more had been hoped for.
Or for that matter Muzzy's gives 183 hp for the ZX-12R with their pipe and a PC, so 185-190 on their dyno for the ZX-14 with a pipe would be only a 2-7 hp improvement, again not as much as many had hoped for.
|
VPN
Zone Head
Posts: 718
|
posted January 04, 2006 04:00 PM
4-1 total pipe out of titanium, can out of carbon could make it lighter
Better extra hp is gained using a turbo
I wonder if the blades can be adjusted in some turbo models
|
fullzx12r
Zone Head
French Guy
Posts: 864
|
posted January 04, 2006 08:38 PM
in france DEVIL exhaust wiil do someting for the 14
http://www.devil.fr/fr/moto/route.cfm?raz=1
in JAPAN : k-factory , BEET, and advantage will do to
____________
zx-12r 01'
zzr 1400 06'
hayabusa 08'
zzr 1400 12'
|
gaby12
Novice Class
Posts: 60
|
posted January 05, 2006 08:57 AM
Edited By: gaby12 on 5 Jan 2006 09:00
Makes me head spin round and round.....need to grab the floor to keep from falling down!
|
fullzx12r
Zone Head
French Guy
Posts: 864
|
posted January 05, 2006 08:46 PM
Agras from JAPAN will do to
____________
zx-12r 01'
zzr 1400 06'
hayabusa 08'
zzr 1400 12'
|
|