|
Thread: I am getting desperate! [ This thread is 2 pages long: 1 2 Next» ] |
brendasue555
Expert Class
Posts: 436
|
posted April 17, 2011 03:54 PM
I am getting desperate!
I need a Kawasaki zx11 D engine. I know that one of you has to have one siiting somewhere gathering dust. So please could you all check you dust piles and see if somewhere in there you could find a zx11 motor you might want to sell. Thanks bunches.....
____________
Brenda
  
|
tshultz
Zone Head
Posts: 555
|
posted April 17, 2011 04:39 PM
Time to put a 14 motor in there.
|
shiphteey
Needs a job
Posts: 2350
|
posted April 17, 2011 06:32 PM
Would a zzr 1200 moto bolt up?
____________
RnR Cycles
Loring: 229.6 mph (tailwind)
Bonneville: 201 avg, 208 (tailwind)
TX Mile: 200.2 mph (headwind)
Maxton Mile: 220 mph headwind (headwind)
Ohio Mile: 222 mph (spinning)
Street: Classified
|
entropy
Moderator
Posts: 8640
|
posted April 17, 2011 07:34 PM
it would be sacrilege to put a 14 or 1200 motor in the D Meyer legend bike.
gotta find an 11 motor, there must be hundreds of those bikes rusting away somewhere.
____________
This moderator uses moderation in moderation
|
shiphteey
Needs a job
Posts: 2350
|
posted April 17, 2011 07:46 PM
http://cgi.ebay.com/ebaymotors/ZX-11-99-MOTOR-6297-MILES-GREAT-CONDITION-ONLY-MOTOR-_W0QQcmdZViewItemQQhashZitem3365bd82baQQitemZ220750250682QQptZMotorcyclesQ5fPartsQ5fAccessories
____________
RnR Cycles
Loring: 229.6 mph (tailwind)
Bonneville: 201 avg, 208 (tailwind)
TX Mile: 200.2 mph (headwind)
Maxton Mile: 220 mph headwind (headwind)
Ohio Mile: 222 mph (spinning)
Street: Classified
|
tshultz
Zone Head
Posts: 555
|
posted April 17, 2011 08:53 PM
quote:
it would be sacrilege to put a 14 or 1200 motor in the D Meyer legend bike.
gotta find an 11 motor, there must be hundreds of those bikes rusting away somewhere.
ok then a busa engine  there's a bunch of 11 motors on ebay.
|
entropy
Moderator
Posts: 8640
|
posted April 17, 2011 10:42 PM
quote:
http://cgi.ebay.com/ebaymotors/ZX-11-99-MOTOR-6297-MILES-GREAT-CONDITION-ONLY-MOTOR-_W0QQcmdZViewItemQQhashZitem3365bd82baQQitemZ220750250682QQptZMotorcyclesQ5fPartsQ5fAccessories
there ya go, Ali!
\
$1349, motor only 6297mi
____________
This moderator uses moderation in moderation
|
oldkawboy
Needs a job
Posts: 2110
|
posted April 18, 2011 10:14 AM
quote:
it would be sacrilege to put a 14 or 1200 motor in the D Meyer legend bike.
This is from a guy who painted his Boosa............. Kawasaki green & purple!!!!!!!!! ;-)
We're keeping an eye out for ya Brenda.
Dan
|
SteddyTeddy
Pro
Posts: 1659
|
posted April 18, 2011 01:27 PM
ZZR1200 motor with a 1224 kit. That will make that 11 move!
|
ZRXDean
Needs a job
Posts: 2225
|
posted April 18, 2011 01:31 PM
Sheeeit, call a cycle salvage yard, you should be able to find one cheaper than $1350. I sold a good 2006 ZX10 motor for $900.
|
osti33
Needs a job
Posts: 2973
|
posted April 18, 2011 01:44 PM
quote:
Sheeeit, call a cycle salvage yard, you should be able to find one cheaper than $1350. I sold a good 2006 ZX10 motor for $900.
Dean is on the money! Call around to some salvage yards.
1350 is high as a giraffe's ass. I bet a salvage yard will sell you one for 900 or less.
|
brendasue555
Expert Class
Posts: 436
|
posted April 18, 2011 09:37 PM
All the ones on Ebay have been rebuilt and had crank work done on them. I dont think that is ok if the crank is going to be stroked. And yes 1350 is way high. Please keep your eyes out for me. No salvage yards around here have one. I have been looking for a while. Thanks again!
____________
Brenda
|
dougmeyer
Needs a job
moderated
Posts: 2604
|
posted April 18, 2011 09:39 PM
Funny you should mention that, Ship. I was riding my ZZR yesterday, thinking about just that and it dawned on me that I don't think there's a reason why a ZX-11 head wouldn't fit on a ZZR. The ZZR doesn't have the down draft ports, but I think my (Bren's) head would go right on a 1224. Let's just think about that for a bit. I'll ask Steve Rice and see what he thinks. Hang in there Bren.
____________
It's not that I think you're dumb, it's just that so much of what you know isn't true....
|
ZRXDean
Needs a job
Posts: 2225
|
posted April 19, 2011 05:21 AM
The 1200 block is nikasil, I wonder if the water ports will match up?
|
SteddyTeddy
Pro
Posts: 1659
|
posted April 19, 2011 06:04 AM
The 1100 head will not fit on the 1200 motor. Bore spacing is wider on the 1200, studs are layed out wider and the bock is slightly wider. A whole ZZR motor should drop right in a ZX11 though. All motor mounts are the same and carb spacing and header spacing is the same.
|
SteddyTeddy
Pro
Posts: 1659
|
posted April 19, 2011 06:07 AM
quote:
Funny you should mention that, Ship. I was riding my ZZR yesterday, thinking about just that and it dawned on me that I don't think there's a reason why a ZX-11 head wouldn't fit on a ZZR. The ZZR doesn't have the down draft ports, but I think my (Bren's) head would go right on a 1224. Let's just think about that for a bit. I'll ask Steve Rice and see what he thinks. Hang in there Bren.
Did you mean ZRX, because the ZZR is downdraft?
|
tshultz
Zone Head
Posts: 555
|
posted April 19, 2011 08:21 AM
A@j cycle savage 610.521.6700 there in philly
http://www.ajcyclesalvage.com/main2/contact/a_n_j_v_42_inq.htm
|
dougmeyer
Needs a job
moderated
Posts: 2604
|
posted April 19, 2011 12:45 PM
Of course it won't work. As Steddy said, the bore spacing is different and the cam chain C/L is 3mm further left. Duh.I knew that. And yes, the ZZR is downdraft, but I always assumed the carb spacing was different. Is it the same?
____________
It's not that I think you're dumb, it's just that so much of what you know isn't true....
|
SteddyTeddy
Pro
Posts: 1659
|
posted April 19, 2011 01:09 PM
As far as I know the carb spacing is the same as the ZX11. Should be 77-85-77 if I remember correct.
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3744
|
posted April 20, 2011 01:54 PM
Brenda, what happened to your engine?
I dont get on here that often anymore... I must have missed somthing.
On another note, the guy who bough my 1427 zx12r wants to sell it now .......
____________
Y2KZX12R
CompetitionCNC.com
|
Ken 12r
Novice Class
Posts: 81
|
posted April 20, 2011 02:40 PM
Brendasue you could try asking here http://www.bigbikeworld.com/forum/default.asp
Its not as busy these days but there is still a lot of 11 owners look in.
____________
www.uklandspeedracingassociation.co.uk
|
2000redrocket
Pro
Posts: 1599
|
posted April 24, 2011 08:00 PM
brenda i sent you a link on your facebook wall of a 94 for 1200
|
osti33
Needs a job
Posts: 2973
|
posted April 29, 2011 03:07 PM
 Edited By: osti33 on 29 Apr 2011 22:08
Here is a brand new stroker crank for sale and Mike(the guy selling it) is a real good guy. No worries on buying stuff from him. 
http://www.psychobike.com/forums/garage-sale/79153-zx-11-5mm-falicon-weldup-new.html
|
dougmeyer
Needs a job
moderated
Posts: 2604
|
posted April 29, 2011 08:38 PM
Osti,
That's a +5. too big for Brenda's bike. Needs lots of work to get that in there. Pretty sure you gotta lose the starter.
Jim,
Bren's crank snapped outboard of the right main brg. The rotating assy kept running with everything staying in time so the pistons, valves, head, etc., are unscathed. Not sure why it broke, it doesn't look like it was cracked, but the break is quite large. The basket is broken as is the starter/gen drive chain, so I'm guessing that started it.
____________
It's not that I think you're dumb, it's just that so much of what you know isn't true....
|
Shane661
Needs a life
Posts: 11403
|
posted April 30, 2011 05:10 AM
quote:
Bren's crank snapped outboard of the right main brg. The rotating assy kept running with everything staying in time so the pistons, valves, head, etc., are unscathed. Not sure why it broke, it doesn't look like it was cracked, but the break is quite large. The basket is broken as is the starter/gen drive chain, so I'm guessing that started it.
Just curious, who did that crank and when?
|
|
|
| Quick Reply: |
|
HOME
NEW TOPIC