|
Thread: How to hardwire |
maddfayce
Novice Class
SARR SGT@ARMS
Posts: 47
|
posted October 30, 2009 02:33 PM
How to hardwire
I may be deaf dumb and blind, but I cant find a how to on hardwiring my headlights to my battery.
   
|
Pudsky
Parking Attendant
pudsky
Posts: 13
|
posted October 31, 2009 01:54 PM
You don't need to hardwire your headlights to your batters. You might have a fried relay in your fuse box. Take a look at this thread:
http://kawasakiworld.com/zx-12r/28775-stator-connector-no-headligths-fix-new-pics.html
You will see how to use a wire to jump the headlight relay to see if it is in fact bad. If its bad, you can replace the relay farly easy. That is what I did with mine. If this turns out to be your problem, and you have a hard time finding a replacement relay, contact me I have an extra one. I don't remember exactly where I ordered it, but do some surfing around you will find it.
|
maddfayce
Novice Class
SARR SGT@ARMS
Posts: 47
|
posted November 01, 2009 07:44 PM
Well the battery just died again, the new one that is connected to the new rectifier which is connected to the new stator. Would a relay keep the stator from charging the battery?
|
maddfayce
Novice Class
SARR SGT@ARMS
Posts: 47
|
posted November 01, 2009 08:35 PM
I pulled the J box apart, but cant get that relay of the inside. Any ideas?
|
Texas12R
Expert Class
Posts: 451
|
posted November 05, 2009 04:46 AM
I just looked at the link to the above post
I'm thinking that relay is soldered to a printed
circuit board...... so you'll have to desolder
the relay and get a new relay.... which I think
is a common relay
|
Texas12R
Expert Class
Posts: 451
|
posted November 05, 2009 04:59 AM
 Edited By: Texas12R on 5 Nov 2009 12:07
This is the source listed in the thread above
http://www.onlinecomponents.com/buy/MEC-RELAYS/GA-1C-12D/
|
|
|
| Quick Reply: |
|
HOME
NEW TOPIC