countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted June 19, 2006 11:56 AM
CHROME & CHAMELEON 1375CC STROKER
k heres some pics of the bike. enjoy.
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
   
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted June 19, 2006 11:58 AM
house of kolor kamelon, changes from cyan -> purple
muzzys mirror block offs
EVERYTHING shaved, signal dynamics blinker LEDs flushed into winglets (my idea)
extreme graphic moto hugger/chain guard(by far the best looking)
hotbodies undertail (highly reccomended)
clear alternatives tail light
muzzys 1375cc stroker
muzzys full carbon exhaust...
NOW a muzzys megaphone! with pcIIIr of course
chrome dipped wheels, both case covers, sprocket cover, lower forks/mounts, all 3 calipers and everything else that was gold/magnesium colored
braketech 320mm oversized axis rotors- front and back- black ductile iron (better than stainless steel, and the best without going ceramic rotors)
brembo master cylinder (custom mount reservoir)
brembo 65mm axial (34/34) calipers
ferodo sintered pads front + rear
galfer silver stainless lines, front + rear
vortex sprocket- rear 46 black anodized with chrome nuts
sprocket specialist- front 18
tsubaki sigma nickel plated chain (beautiful)
scotts billet oil filter (really cool)
puig dark smoke screen (best quality ive seen)
pazzo clutch lever
kennedy bar ends
kleen block off plates
muzzys clutch (so much better than stock)
bmc race-flow air filters
muzzys aluminum fans
had chatterbox alarm (piece of shit, then bought scorpion alarm with all the sensors- also garbage, had to pull it all out)
24v electrical (2 batteries)
cox silver radiator guard (not on yet)
stock suspension, height, and wheelbase...
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted June 19, 2006 12:14 PM
 Edited By: countersteer on 19 Jun 2006 15:20
320mm oversized braketech iron rotors (front + rear), brembo calipers, ferodo pads, galfer lines, brembo master and bottle i got from www.calsportbike.com - the owner todd set me up great and id highly reccomend him for any custom parts etc
chrome was done by www.chromeprosplating.com - excellent price for top notch work
local shop is maximum motorsports in riverhead, new york
will take some more pics, probably of me riding... let me know what you all think...
leaky gasket on generator cover- oil can be seen in pic 8... oil sprays onto my boot and rear tire so shes going to remain dormant until this nuisance is rectified in a day or two...
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
GUNNER
Needs a life
Posts: 5778
|
posted June 19, 2006 01:16 PM
Though I'm NOT a huge fan of Chrome your bike is very clean and looks nice. The 12R is the most perfect looking bike ever built. I'll never part ways with mine. I see a pile of cash sitting there in your bike> VERY VERY nice!!!!!!!!
|
Megabyte
Pro
Posts: 1047
|
posted June 19, 2006 01:39 PM
Edited By: Megabyte on 19 Jun 2006 14:40
As much as I like the looks of my bike, I think yours truly shows how beautiful the 12 is. Long live the 12!
____________
We First make our habits and then our habits make us.
|
supra5677
Pro
Posts: 1279
|
posted June 19, 2006 03:50 PM
that bike is clean as fuck 
|
wylde
Expert Class
Posts: 371
|
posted June 19, 2006 04:09 PM
Out Fn Standing,,it truley is a work of art when someone pours heart,,soul and hard work into a project and the end result is a work of art,, congrats baby on a job well done,, and im sure your thinking about what else to do to it!! looking forward to taking a ride with ya someday counter! Vic
____________
There you go again,,NOT being aware of yourself !
|
GUNNER
Needs a life
Posts: 5778
|
posted June 19, 2006 05:45 PM
Not to be tooo picky BUT your rear axle is backwards  The nut goes on the sprocket side 
And once again that bike is beautiful!!!!!!!!!!!!!!!!! My GOD man I love the 12R!!!!!!!!!!!!!!!!!
|
GUNNER
Needs a life
Posts: 5778
|
posted June 19, 2006 07:38 PM
Actually the front Axle is backwards to Not that anyone beside me would ever notice 
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted June 19, 2006 07:40 PM
quote:
Actually the front Axle is backwards to Not that anyone beside me would ever notice
good call man, thanks
didnt notice the axles, but did notice a few other small things... everything should be ironed out by this weekend...
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
GUNNER
Needs a life
Posts: 5778
|
posted June 19, 2006 07:51 PM
Actually I do as much maintenance on my stuff as I do riding. It works out about even actually. A few hours riding = a few house of maintenance. I feel a lot better riding these things when I know it's as close to perfect as it can be and no stone has been left unturned. To most people it's only appears to be cleaning BUT I'm constantly checking and rechecking every detail on my stuff. The cleaning just happens because the shit is already apart being maintained.
|
park12r
Expert Class
Posts: 124
|
posted June 19, 2006 08:06 PM
signal dynamics blinker LEDs flushed into winglets (my idea)
i like that,do you have some closed up pics on them???
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted June 19, 2006 08:15 PM
quote:
signal dynamics blinker LEDs flushed into winglets (my idea)
i like that,do you have some closed up pics on them???
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
swft
Needs a life
Full throttle!
Posts: One MEEEEEELLION
|
posted June 19, 2006 08:59 PM
Nice shoes!
|
park12r
Expert Class
Posts: 124
|
posted June 19, 2006 09:38 PM
Edited By: park12r on 19 Jun 2006 22:44
thanks..best looking 'signalights' ive seen so far
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted June 30, 2006 10:41 AM
BLEW THE FUCKING ENGINE UP TODAY
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WILL POST DETAILS SOON... FUCK~!!@!
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
Gunner
Needs a life
Posts: 5778
|
posted June 30, 2006 02:17 PM
Sorry to hear that. But it's a stroker and if they're NOT done just perfect on the assembly they don't live.
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 30, 2006 03:25 PM
Man that sucks.
Is it knocking?
|
osti33
Needs a job
Posts: 2973
|
posted June 30, 2006 03:51 PM
quote:
Man that sucks.
Is it knocking?
+1
The suspense is killing me. Was it the top end like mine or was it the bottom end like a rod bearing?
|
wylde
Expert Class
Posts: 371
|
posted July 01, 2006 11:30 AM
Shit Dude,, sorry to hear that,, it could have waited till summer was over,, my F up,,i might not be riding this summer either,,will see,, let us know whats up with the bike when you can,,going to Jones Beach this 4th for the sun and fireworks show,, are you going?
____________
There you go again,,NOT being aware of yourself !
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted July 01, 2006 06:04 PM
update: bought zx-14 today (yes, blew the stroker engine yesterday, brought home zx-14 today...)
still waiting for the outcome on the 12
wish me luck (on the 12)- im gonna need it
by the way, the zx-14 is PUSSY compared to the stroker 12, and shes whisper quiet too- i can actually hear myself think now... and the lcd dash is pretty slick lookin
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted July 01, 2006 06:22 PM
All your 14 needs is a pipe and 16 tooth front sprocket...
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted July 03, 2006 07:02 AM
Any news on what failed?
____________
Y2KZX12R
CompetitionCNC.com
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted July 04, 2006 08:40 PM
damn, that sucks......
Buddy's stroker was makin passes at RRR, I want one bad, but he was spinning up top and so was I..............., Think I need to join TFA racing............
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted July 04, 2006 08:41 PM
wanna sell it?
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
|
|
HOME
NEW TOPIC